OFFICIAL THREAD: Forgestar F14 Super Deep Concave

shnaggs · 01-30-2016, 10:47 AM

Well after talking to pat, it appears that I can't do 18" sdc without major mods. So then we talked about 19's and it seems I am limited to wheel size there to if I want to go sdc in the rear and have no rubbing.
Has anyone fit sdc in the rear without mods, and have a nice flush look without rubbing???
What wheel and tire specs please?

shnaggs · 01-30-2016, 10:48 AM

Oh and I'm an '11 e90 msport, so Lci.

mashimarho · 01-31-2016, 02:30 AM

Quote:

Originally Posted by sebasupreme

Love this!

How much are you cambered in front and back?

I am on stock camber plates and control arms. But, it is roughly about one degree.

sebasupreme · 01-31-2016, 02:35 AM

Quote:

Originally Posted by mashimarho

I am on stock camber plates and control arms. But, it is roughly about one degree.

roughly one degree front and back?

thanks btw, I'm ordering some work wheel gnosis cv203 2pc wheels and thinking about the same specs!

sebasupreme · 01-31-2016, 02:39 AM

Quote:

Originally Posted by ksspacegray07

he's stock camber

Yeah I knew that I was just looking to get a number cause his setup is perfect IMO. Not a fan of crazy camber, and his setup is form and function, I love it.

mashimarho · 02-01-2016, 12:19 AM

Quote:

Originally Posted by sebasupreme

roughly one degree front and back?

thanks btw, I'm ordering some work wheel gnosis cv203 2pc wheels and thinking about the same specs!

I don't remember the exact degree, but about 1.4% front and 1.7% rear.

sebasupreme · 02-01-2016, 02:27 PM

Quote:

Originally Posted by mashimarho

I don't remember the exact degree, but about 1.4% front and 1.7% rear.

good-looking out fam!

mjn77 · 02-13-2016, 04:55 AM

I. Need. A. Set. Of. These!!!

dannyle27 · 02-14-2016, 02:06 AM

So my set went on today.

19x9.5 +25
19x10 +19

Tires hankook Ventus v12
235/35/19
265/30/19

Front:

Front side:

Rear (sort of):

So I'm having problems rubbing in the front bracket over big bumps (rolled and grinded down to the bolt) and rear (not sure where... Rolled and grinded like everything lol)

Any suggestions?

tom3touring · 02-15-2016, 08:37 AM

I love these wheels!

sudo4re · 02-15-2016, 06:32 PM

Love the wheel style, hate the stretched look with the wheel lips stick out pass the tires. Wonder if a less aggressive set up will pull the lips back in and fit inside the tire properly.

dannyle27 · 02-15-2016, 10:01 PM

Even with th fenders rolled, I'm seeing it rub along the inside of the rolled up fender. Any cons to shaving it down with a dremel?

tshoww · 02-15-2016, 10:13 PM

Quote:

Originally Posted by dannyle27

So my set went on today.

19x9.5 +25
19x10 +19

Tires hankook Ventus v12
235/35/19
265/30/19

Front:

Front side:

Rear (sort of):

So I'm having problems rubbing in the front bracket over big bumps (rolled and grinded down to the bolt) and rear (not sure where... Rolled and grinded like everything lol)

Any suggestions?

I want my e90 to look like this what a beauty

dannyle27 · 02-16-2016, 12:47 AM

Youre only a set of wheels away

Quote:

Originally Posted by tshoww

I want my e90 to look like this what a beauty

ayooo_itzme · 03-03-2016, 05:28 PM

Wondering if anyone rain the SDC with springs instead of coilovers?

tryingtobebest · 03-04-2016, 08:19 PM

Quote:

Originally Posted by dannyle27

So my set went on today.

19x9.5 +25
19x10 +19
Tires hankook Ventus v12
235/35/19
265/30/19

Any suggestions?

Where did you get fronts with +25, i thought max was +22?????

46m3csl · 03-06-2016, 11:14 AM

Quote:

Originally Posted by tryingtobebest

Where did you get fronts with +25, i thought max was +22?????

Quote:
Originally Posted by dannyle27 View Post
So my set went on today.

19x9.5 +25
19x10 +19
Tires hankook Ventus v12
235/35/19
265/30/19

Any suggestions?

I would like to know too? Did they custom make them?

dannyle27 · 03-06-2016, 10:23 PM

Quote:

Originally Posted by 46m3csl

Quote:
Originally Posted by dannyle27 View Post
So my set went on today.

19x9.5 +25
19x10 +19
Tires hankook Ventus v12
235/35/19
265/30/19

Any suggestions?

I would like to know too? Did they custom make them?

No clue. They had one set for sale at the shop. The owner couldn't sell them so I offered trade in for my m359's plus cash. Shit rubs still haha. Im gonna grind down that bumper bracket flush this week since i have no front end on because Im waiting for my 1M bumper.

dannyle27 · 03-06-2016, 10:24 PM

Quote:

Originally Posted by ayooo_itzme

Wondering if anyone rain the SDC with springs instead of coilovers?

Im on koni yellows and H&r sports.

ksspacegray07 · 03-28-2016, 10:20 PM

how much tire pressure is everyone running,
getting everything dialed in right now

ksspacegray07 · 03-28-2016, 10:32 PM

also, the center caps.. do you just hammer them in? seems like a pretty tight fit

ChazCulver · 04-01-2016, 01:26 PM

for you bagged guys, are you able to run the 9.5/11 widths without rollering/shaving/cutting/any of that sh!t without issues?

01-30-2016, 10:47 AM	#45
shnaggs Lieutenant 78 Rep 459 Posts Drives: TDi Join Date: Jan 2015 Location: NE, Pa iTrader: (1)	Well after talking to pat, it appears that I can't do 18" sdc without major mods. So then we talked about 19's and it seems I am limited to wheel size there to if I want to go sdc in the rear and have no rubbing. Has anyone fit sdc in the rear without mods, and have a nice flush look without rubbing??? What wheel and tire specs please?
	Appreciate 0 Quote

01-30-2016, 10:48 AM	#46
shnaggs Lieutenant 78 Rep 459 Posts Drives: TDi Join Date: Jan 2015 Location: NE, Pa iTrader: (1)	Oh and I'm an '11 e90 msport, so Lci.
	Appreciate 0 Quote

02-13-2016, 04:55 AM	#52
mjn77 Colonel 1460 Rep 2,055 Posts Drives: E90 M3 LCI Jerez Black Join Date: Apr 2015 Location: Herts, UK iTrader: (2) Garage List 2011 BMW M3 [10.00]	I. Need. A. Set. Of. These!!!
	Appreciate 0 Quote

02-14-2016, 02:06 AM	#53
dannyle27 Second Lieutenant 38 Rep 243 Posts Drives: 2018 M3 Join Date: Jun 2015 Location: Boston/San Diego iTrader: (2) Garage List 2014 Honda CBR600RR [0.00] 2011 BMW 335i [0.00]	So my set went on today. 19x9.5 +25 19x10 +19 Tires hankook Ventus v12 235/35/19 265/30/19 Front: Front side: Rear (sort of): So I'm having problems rubbing in the front bracket over big bumps (rolled and grinded down to the bolt) and rear (not sure where... Rolled and grinded like everything lol) Any suggestions?
	Appreciate 0 Quote

02-15-2016, 08:37 AM	#54
tom3touring Enlisted Member 15 Rep 33 Posts Drives: F31 320i Stage 2 Join Date: Mar 2013 Location: Netherlands iTrader: (0) Garage List 2013 BMW F31 [0.00]	I love these wheels! __________________ BMW F31 - 320i N20B0 - Stage 2 - 3" Catless Downpipe / FMIC / Alu Charger Pipes / K&N Inlayfilter
	Appreciate 0 Quote

02-15-2016, 06:32 PM	#55
sudo4re Second Lieutenant 46 Rep 236 Posts Drives: 2020 X3M Competition Join Date: Sep 2014 Location: Earth, circa 21st Century iTrader: (9)	Love the wheel style, hate the stretched look with the wheel lips stick out pass the tires. Wonder if a less aggressive set up will pull the lips back in and fit inside the tire properly. __________________ I don't drive fast, I just fly low...
	Appreciate 0 Quote

02-15-2016, 10:01 PM	#56
dannyle27 Second Lieutenant 38 Rep 243 Posts Drives: 2018 M3 Join Date: Jun 2015 Location: Boston/San Diego iTrader: (2) Garage List 2014 Honda CBR600RR [0.00] 2011 BMW 335i [0.00]	Even with th fenders rolled, I'm seeing it rub along the inside of the rolled up fender. Any cons to shaving it down with a dremel?
	Appreciate 0 Quote

03-03-2016, 05:28 PM	#59
ayooo_itzme Private First Class 8 Rep 131 Posts Drives: 2010 335i Join Date: Aug 2015 Location: Memphis iTrader: (1)	Wondering if anyone rain the SDC with springs instead of coilovers?
	Appreciate 0 Quote

03-28-2016, 10:20 PM	#64
ksspacegray07 Captain 77 Rep 801 Posts Drives: 335is coupe Join Date: Nov 2009 Location: NY iTrader: (3)	how much tire pressure is everyone running, getting everything dialed in right now
	Appreciate 0 Quote

03-28-2016, 10:32 PM	#65
ksspacegray07 Captain 77 Rep 801 Posts Drives: 335is coupe Join Date: Nov 2009 Location: NY iTrader: (3)	also, the center caps.. do you just hammer them in? seems like a pretty tight fit
	Appreciate 0 Quote

04-01-2016, 01:26 PM	#66
ChazCulver Private First Class 11 Rep 162 Posts Drives: E91 Join Date: Nov 2015 Location: 615; TN iTrader: (0)	for you bagged guys, are you able to run the 9.5/11 widths without rollering/shaving/cutting/any of that sh!t without issues?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search