[Hedges]

lol resolve? i sure hope theres not a problem!

[Hedges]

Now i'm scared!

[exidisjon]

Originally Posted by VMRWheels

Sending you over a PM right now.



They look to be in stock right now if no pre-orders have been recently taken. I would suggest giving them a call for the most recent inventory.



I believe Don spoke with you this morning. We are trying to resolve this as soon as possible.

-Charles@VMRWheels
www.vmrwheels.com

Didnt get a pm =)

[Hedges]

I hope there n'est pas problemo I paid in full already!

[pika]

any ETA on other colors on the 713???

[d3l0n]

If i order from **********s.com is it the same inventory status? I'm looking for 19x9.5 or 19x10 and 19x8.5 for e90 330i.

[two30i]

PM sent.

[Peter@VMRWheels]

Originally Posted by Hedges

Now i'm scared!

We had a database snafu... switched to a faster server and completely forgot to move the "live" inventory over. In either case if you have an issue feel free to PM or e-mail

[Peter@VMRWheels]

Originally Posted by d3l0n

If i order from **********s.com is it the same inventory status? I'm looking for 19x9.5 or 19x10 and 19x8.5 for e90 330i.

It really depends on the inventory level of our individual dealers. If we don't have it available, some dealers may still have it available.

[Bonefish]

Originally Posted by SLCGoonski

710s...win.

Looks awesome! What wheel and tire size combo are you running?

[VMRWheels]

Originally Posted by Bonefish

Looks awesome! What wheel and tire size combo are you running?

Looks like a 9.5 +33 with a 265 tire to me.

-Charles@VMRWheels

[Bonefish]

Originally Posted by VMRWheels

Looks like a 9.5 +33 with a 265 tire to me.

-Charles@VMRWheels

Thanks Charles!

So I think I am down to either v710 9.5 or VB3 10.0 for the rear. Arrghh..decisions decisions! They are both awesome. Staying with stock suspension parts so, do I try to go 10 inch with 275 or just hang with 9.5 and 265. Just want to make sure I have no rubbing issues.

[medik13]

I saw that a member fit a 19X9.5, V710 rear with a 22et on an e90 LCi. It fit until he lowered it with H&R springs then he got rubbing even with rolled fenders. He was using a 265/30 rear. He managed to shave off 4 mm of the hub of the wheel putting him at 26et. By the pictures, it fit FLUSH and looked awesome. He no longer has any rubbing.

I too have an e90 LCI and want an agressive M3 offset. I was wondering if I went with a 9.5" 33et in the V710's, would it be ok to add a 5-8mm spacer to acheive the same aggresive stance. I am not lowered nor do I have my fenders rolled but I may be doing it, if I see fit. I had also planned to go with a 35et up front...

Also, Do you sell wheel and tire packages? thanks...

[VMRWheels]

Originally Posted by Bonefish

Thanks Charles!

So I think I am down to either v710 9.5 or VB3 10.0 for the rear. Arrghh..decisions decisions! They are both awesome. Staying with stock suspension parts so, do I try to go 10 inch with 275 or just hang with 9.5 and 265. Just want to make sure I have no rubbing issues.

With a 10" 275 at stock height, you are good to go! No rubbing issues on a E90 sedan.

If you love concave, you know where to go.

Originally Posted by medik13

I saw that a member fit a 19X9.5, V710 rear with a 22et on an e90 LCi. It fit until he lowered it with H&R springs then he got rubbing even with rolled fenders. He was using a 265/30 rear. He managed to shave off 4 mm of the hub of the wheel putting him at 26et. By the pictures, it fit FLUSH and looked awesome. He no longer has any rubbing.

I too have an e90 LCI and want an agressive M3 offset. I was wondering if I went with a 9.5" 33et in the V710's, would it be ok to add a 5-8mm spacer to acheive the same aggresive stance. I am not lowered nor do I have my fenders rolled but I may be doing it, if I see fit. I had also planned to go with a 35et up front...

Also, Do you sell wheel and tire packages? thanks...

Depending on which tire you have, +33 may cause rubbing issues on your car, even at stock height. To be on the safe side, I recommend going with a +45 and adjusting accordingly to how flush you are looking to go. Fending rolling will definitely be required if you plan on achieving a flush stance like M3 fitments.

I would suggest putting the +45's on and getting a ruler and measuring the distance between the edge of the tire to the fender liner and seeing how much clearance you have to work with. Each cars alignment and suspension becomes a factor as well.

-Charles@VMRWheels

[medik13]

Originally Posted by VMRWheels

With a 10" 275 at stock height, you are good to go! No rubbing issues on a E90 sedan.

If you love concave, you know where to go.



Depending on which tire you have, +33 may cause rubbing issues on your car, even at stock height. To be on the safe side, I recommend going with a +45 and adjusting accordingly to how flush you are looking to go. Fending rolling will definitely be required if you plan on achieving a flush stance like M3 fitments.

I would suggest putting the +45's on and getting a ruler and measuring the distance between the edge of the tire to the fender liner and seeing how much clearance you have to work with. Each cars alignment and suspension becomes a factor as well.

-Charles@VMRWheels

Thank you...I am waiting till this weekend for a member that is trying to mount a 19X10 on his e90 LCI. That will finally be the deciding factor.

[VMRWheels]

Originally Posted by medik13

Thank you...I am waiting till this weekend for a member that is trying to mount a 19X10 on his e90 LCI. That will finally be the deciding factor.

Sounds great! We are currently waiting on the same person as well, his name is Chino.

-Charles@VMRWheels

[1clean335i]

Might not happen this weekend guys.... UPS is being a pain in my rear... Its almost 8pm and I am supposed to be getting them mounted at 8am in Orlando (100 miles) away. No sign of it yet and my gf is on the phone bitching at UPS right now trying to find out where the wheels are. Sucks b/c theres a big BMW rally going on in Orlando tomorrow and I wanted them on for it...

[VMRWheels]

Sorry to hear the bad news Chino... Im PMing you right now with the most recent update I have.

-Charles@VMRWheels

[VMRWheels]

Updates!!!

- New shipment this week = all green's.
- Rest of the ETA's are now updated!
- NEW FITMENTS added.
- V710 / VB3 Matte Black & Gunmetal ADDED

ALL ORDERS ARE NOW BEING PROCESSED & SHIPPED ON TIME. Had a slight delay during mid/late May due to the holiday rush.

[1clean335i]

got my 19x10's on Charles. They look great!!! Thanks again

[medik13]

Originally Posted by 1clean335i

got my 19x10's on Charles. They look great!!! Thanks again

Awesome...How did it go? What did you need to make it work? PICS????

[1clean335i]

Originally Posted by medik13

Awesome...How did it go? What did you need to make it work? PICS????

It went great man.... Didnt need anything to make it work. Its a perfect fit imo!!!

pics- http://www.e90post.com/forums/showthread.php?t=271622