PROcede CANbus Activation directions (with video)

roho3323 · 04-01-2009, 11:12 PM

Hey Shiv. Is the canbus retrofit for the previous RevII harness available for sale at the moment? If not, when do we expect these to be ready for purchase?

Thanks.

cn555ic · 04-01-2009, 11:15 PM

Quote:

Originally Posted by roho3323

Hey Shiv. Is the canbus retrofit for the previous RevII harness available for sale at the moment? If not, when do we expect these to be ready for purchase?

Thanks.

Shiv stated that he has all the wires ready to go for the 300 people that have ordered REVII without the CANbus wires, problem is that his website guy is on vacation...Hope he gets back by this week!!!

Choolgooz · 04-02-2009, 02:14 AM

How different is the install going to be for the FirstGen revII owners?

roho3323 · 04-02-2009, 06:30 AM

Quote:

Originally Posted by cn555ic

Shiv stated that he has all the wires ready to go for the 300 people that have ordered REVII without the CANbus wires, problem is that his website guy is on vacation...Hope he gets back by this week!!!

Got it...

OpenFlash · 04-02-2009, 06:49 AM

Quote:

Originally Posted by Choolgooz

How different is the install going to be for the FirstGen revII owners?

All you nonCAN Rev.2 guys are going to do is:

Step 1
Update to the CANbus firmware

Step 2
Install the two wires "Ts" described in the video (green/white and blue/white). They just pop into the PROcede connector on one side and into the Grey subconnector patch on the other side.

That's it. Wont take more than a couple of minutes once the ECU/PROcede is exposed

Shiv

Kelvin1000 · 04-02-2009, 07:17 AM

No love for CANBUS Stage 2???

OpenFlash · 04-02-2009, 01:10 PM

Quote:

Originally Posted by Kelvin1000

No love for CANBUS Stage 2???

It's coming. Have you tried the CANbus Stg 1?? It's a strong sucker.

inthemiddle · 04-02-2009, 01:36 PM

Quote:

Originally Posted by shiv@vishnu

It's coming. Have you tried the CANbus Stg 1?? It's a strong sucker.

i haven't had a chance to hook up the laptop yet for the stage 1 map that's loaded... I will say... it feels like a bat outta hell (i hate that expression) near the middle and top of 3rd gear... but actually feels a little weak in 2nd...(especially the very top of 2nd)

haven't had a chance to look at the 1st or 2nd gear torque nanny settings... is it scaled back in 2nd ??

gonna try to get some time to hook that up and look and test more...etc.. but probably not till weekend...

cn555ic · 04-02-2009, 01:46 PM

Quote:

Originally Posted by shiv@vishnu

It's coming. Have you tried the CANbus Stg 1?? It's a strong sucker.

when is the ETA for these two wires to be available...I am going on vacation and want to order it so when I return, I will have something to look forward to beside everyday life of work and kids!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Kelvin1000 · 04-02-2009, 01:46 PM

Quote:

Originally Posted by shiv@vishnu

It's coming. Have you tried the CANbus Stg 1?? It's a strong sucker.

I was one of the first to PM / reply for the Sunny Sunday Extravaganza. I was thinking about waiting until I have the required hardware so that I can get the full effect and post a proper review for the boyz.

Let me know what time on Sunday so that I can get there early and take everything apart so can have quick access (don't want to waste too much of your time)

Thanks again!

OpenFlash · 04-02-2009, 02:42 PM

Quote:

Originally Posted by Kelvin1000

I was one of the first to PM / reply for the Sunny Sunday Extravaganza. I was thinking about waiting until I have the required hardware so that I can get the full effect and post a proper review for the boyz.

Let me know what time on Sunday so that I can get there early and take everything apart so can have quick access (don't want to waste too much of your time)

Thanks again!

Here's the meet up info (time/place):
http://www.e90post.com/forums/showthread.php?t=247143

Looking forward to meeting you

Cheers,
shiv

Ilma · 04-02-2009, 06:32 PM

Quote:

Originally Posted by shiv@vishnu

It's coming. Have you tried the CANbus Stg 1?? It's a strong sucker.

+1

I was quite surprised at the stage 1's power.
My FATS times are around 4.6-4.7 seconds and the car pulls just as hard if not harder than when I was running the Non-Canbus stage 2 map.

http://www.e90post.com/forums/showpo...4&postcount=85

I'm kinda liking it!

As a reference point, Hit_Apex reported a FATS time of 4.7-4.9 secs running JB3 1.3 8C Map #6 - 6MT RRDP/SpearcoIC/DCI/93oct.

http://www.e90post.com/forums/showpo...0&postcount=93

OpenFlash · 04-02-2009, 06:32 PM

Quote:

Originally Posted by Ilma

+1

I was quite surprised at the stage 1's power.
My FATS times are around 4.6-4.7 seconds and the car pulls just as hard if not harder than when I was running the Non-Canbus stage 2 map.

I'm kinda liking it!

scalbert · 04-02-2009, 06:42 PM

Quote:

Originally Posted by shiv@vishnu

You gonna give us a FATS time with your car on Stage 3 and then with meth?

jpsimon · 04-02-2009, 06:44 PM

I really need to get me that BT software, I want to join in the FATS fun

Ilma · 04-02-2009, 06:48 PM

Quote:

Originally Posted by jpsimon

I really need to get me that BT software, I want to join in the FATS fun

Now you're making it sound like a fetish!

scalbert · 04-02-2009, 06:53 PM

Quote:

Originally Posted by Ilma

+1

I was quite surprised at the stage 1's power.
My FATS times are around 4.6-4.7 seconds and the car pulls just as hard if not harder than when I was running the Non-Canbus stage 2 map.

Looks good.

I was trying to find a way to coorelate 6AT to 6MT and I figure the easiest way would be to multiply by the difference in ratios. It may not be perfect but should be close enough. So...

To take a 6MT time and equate it to a 6AT, multiply by 0.925

To take a 6AT time and equate it to a 6MT, multiply by 1.08

My 5.2 would equate to 4.8 which is in the ballpark.

I plan on getting back out this weekend (when the rain finally clears) and retest on Stage 1 which I am running right now. I agree it does not have the as major of a kickas the Stage 3 map, but it pulls hard and seems willing to continue pulling. I hope my wires come in soon as when they do and I go to install them, I'll drop the DCI's back in.

scalbert · 04-02-2009, 06:54 PM

Quote:

Originally Posted by jpsimon

I really need to get me that BT software, I want to join in the FATS fun

I guess I need to look it up but do you know if the gearing is different in the xi?

Did you get my email?

jpsimon · 04-02-2009, 07:02 PM

I got your email, thanks. I'm gonna get to work on the app when I get back

I'm not sure about the XI gearing.. but I haven't ever seen/read/heard about any differences.

scalbert · 04-02-2009, 07:07 PM

Quote:

Originally Posted by jpsimon

I got your email, thanks. I'm gonna get to work on the app when I get back

I'm not sure about the XI gearing.. but I haven't ever seen/read/heard about any differences.

Cool. I just updated the FATS page to normalize to the 6AT. I'll look up the xi gearing and if different, enter options for that as well and then resend the file to you.

jpsimon · 04-02-2009, 07:09 PM

ok cool

scalbert · 04-02-2009, 07:15 PM

xi have the same individual and final ratios as the 2WD counterparts, transmission specific of course.

04-01-2009, 11:12 PM	#45
roho3323 The Professor 162 Rep 817 Posts Drives: BMW M6, BMW M240i, BMW 750i Join Date: Jul 2006 Location: Miami, USA iTrader: (14)	Hey Shiv. Is the canbus retrofit for the previous RevII harness available for sale at the moment? If not, when do we expect these to be ready for purchase? Thanks. __________________ 2010 BMW M6 2007 BMW 335i,2012 Audi S4-retired 2016 BMW 750i M-Sport 2015 BMW M235i-retired, 2022 M240i
	Appreciate 0 Quote

04-02-2009, 02:14 AM	#47
Choolgooz Lieutenant 8 Rep 450 Posts Drives: 08 335i coupe Join Date: Dec 2007 Location: Bay Area iTrader: (3)	How different is the install going to be for the FirstGen revII owners? __________________
	Appreciate 0 Quote

04-02-2009, 07:17 AM	#50
Kelvin1000 Major 254 Rep 1,297 Posts Drives: 2019 BMW M2 Competition MT Hoc Join Date: Sep 2007 Location: Miami, FL iTrader: (4)	No love for CANBUS Stage 2???
	Appreciate 0 Quote

04-02-2009, 06:44 PM	#59
jpsimon Team Zissou 3163 Rep 10,200 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	I really need to get me that BT software, I want to join in the FATS fun
	Appreciate 0 Quote

04-02-2009, 07:02 PM	#63
jpsimon Team Zissou 3163 Rep 10,200 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	I got your email, thanks. I'm gonna get to work on the app when I get back I'm not sure about the XI gearing.. but I haven't ever seen/read/heard about any differences.
	Appreciate 0 Quote

04-02-2009, 07:09 PM	#65
jpsimon Team Zissou 3163 Rep 10,200 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	ok cool
	Appreciate 0 Quote

04-02-2009, 07:15 PM	#66
scalbert Major General 158 Rep 5,776 Posts Drives: '13 S4, '15 Q7 Join Date: Feb 2007 Location: Woodstock, GA iTrader: (8)	xi have the same individual and final ratios as the 2WD counterparts, transmission specific of course.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search