[jthurs]

Originally Posted by Luderule

Orange county here

BUMP - I also know of a really good place to DYNO near Long Beach

[elmaki]

Originally Posted by kujo

turbo's have ATs, GT2/3's are MT only, AFAIK

Ah, you're right. It was the new turbo not GT3

[jthurs]

Bump

[muvaside]

Cmon SoCal members , Join us for this dynomeet ! We might even get Shiv himself to come out , if we have enough candidates .

[muvaside]

^^^

[jthurs]

I FOUND US A PLACE!!

I spoke to Sam at Technik (They did the sick ALPINE WHITE COUPE WIDEBODY CONVERSION!!!) They are located in Marina Del Rey, it seems about halfway between O.C. and SFV. Anyway, for 6 people to use their dyno for a day it will cost

$140 PER PERSON for 3 runs PRE chip and 3 runs POST chip
There is NO hourly fee.

This beats $275 that some other places charge, plus we get to see that sick widebody coupe in person.

What do you guys think??

Here's the list so far.

1. Jthurs
2. kujo
3. SfValley335i
4. SoCal335i
5. Muvaside
6. Luderule

[jthurs]

Originally Posted by jthurs

I FOUND US A PLACE!!

I spoke to Sam at Technik (They did the sick ALPINE WHITE COUPE WIDEBODY CONVERSION!!!) They are located in Marina Del Rey, it seems about halfway between O.C. and SFV. Anyway, for 6 people to use their dyno for a day it will cost

$140 PER PERSON for 3 runs PRE chip and 3 runs POST chip
There is NO hourly fee.

This beats $275 that some other places charge, plus we get to see that sick widebody coupe in person.

What do you guys think??

Here's the list so far.

1. Jthurs
2. kujo
3. SfValley335i
4. SoCal335i
5. Muvaside
6. Luderule

what do you guys who are signed up think about location? and cost?

[kujo]

Technik is a great shop.
They did most of the work on my e46ZHP.

I'm still deciding about this, personally.
I may do CO's and BBK, for minor track use instead.

kj

[muvaside]

Originally Posted by jthurs

what do you guys who are signed up think about location? and cost?

Sounds good , but is he also going to do the install?

[SfValley335i]

Originally Posted by jthurs

what do you guys who are signed up think about location? and cost?

Location is fine with me its about 20mins from SFV. Price doesn't seem too much.

The main factor is the MAP switching capability.

[SoCal335i]

So they do 3 runs on the car and then they install my procede and run 3 more times for $140???

[jthurs]

Originally Posted by SoCal335i

So they do 3 runs on the car and then they install my procede and run 3 more times for $140???

That's correct.

[SoCal335i]

Originally Posted by jthurs

That's correct.

Ok im down! But make sure that they will install the procedes in our cars and i hope they have done one before!! I'm not gonna be their guinea pig.haha

[e92law]

I would also be down. Ordered last week. Don't want to delay the process, but would be cool for dyno and install.


e92law

[Luderule]

Count me out if that's the place for sure.

[Driver72]

$140 for 6 runs and PROcede install??

Now that's a GREAT price. I alrready have my PROcede installed but I'd like to know what they'd charge me to upload the new version 1.4 software.
Harman quoted me $100 just to upload the new software and an additional $150 for 1 hour of dyno time to do before and after v1.4 dyno runs to see what exactly the v1.4 does.

[OC ///M]

OP- Count me in...I ordered mine in February-I hope it's here by the dyno date...

The Marina Del Rey location isn't too far away, so count me in.

I didn't see the proposed date/time...

[kujo]

Originally Posted by Driver72

$140 for 6 runs and PROcede install??

Now that's a GREAT price. I alrready have my PROcede installed but I'd like to know what they'd charge me to upload the new version 1.4 software.
Harman quoted me $100 just to upload the new software and an additional $150 for 1 hour of dyno time to do before and after v1.4 dyno runs to see what exactly the v1.4 does.

Technik's a great shop.
They did most of my e46 work.......

[jthurs]

Originally Posted by SoCal335i

Ok im down! But make sure that they will install the procedes in our cars and i hope they have done one before!! I'm not gonna be their guinea pig.haha

Actually, my mistake -- I think the Original Plan was to have SHIV come down and install them, Technik would just be doing the Dynoing.

[Driver72]

Originally Posted by jthurs

Actually, my mistake -- I think the Original Plan was to have SHIV come down and install them, Technik would just be doing the Dynoing.

Yeah, I thought that $140 for 6 runs and PROcede install sounded too good.
I'm happy Shiv installed mine.
I would just recommend you guys do it yourself or have Dan Harman do the install and dyno.

I'll be at Harman Motive on Wednesday April 11th at noon.
I will be redynoing my automatic PROcede 335i sedan (this time without crappy Mobil gas and with 2500+ miles on the car instead of 1200 the first time) to see if I picked up some more power.
But the real reason is so I can have him upload the v1.4 map into my PROcede and then redyno to see what the improvements are.
And finally, I will then pour in a few gallons of 100 octane to make 93 Octane (we only get 91 Octane here in CA...and it's crappy 91 Octane at that) too see what additional power the PROcede really gets for those of you who are lucky enough to be able to buy 93 Octane.

I know some might want to know the results so I will post them on this board. But if anybody is in the area, swing on by and say hello.

[jthurs]

Here's the updated list:

1. Jthurs
2. kujo
3. SfValley335i
4. SoCal335i
5. Muvaside
6. E92Law
7. OCkid

Shiv is the enough people to make it official. Can we get a date and start doing deposits?? Please??

[cupspeed]

interesting