What did you do to your car today?

K9Leader · 09-15-2018, 09:40 PM

Have finally had it with all the dust from the Textar pads on the front so put on some Akebono ceramics and gave the front wheels a good cleaning.

K9Leader

Socket · 09-16-2018, 06:12 AM

Quote:

Originally Posted by AP888

Bald eagles

7" FMIC

desertman123 · 09-16-2018, 05:21 PM

Quote:

Originally Posted by K9Leader

Have finally had it with all the dust from the Textar pads on the front so put on some Akebono ceramics and gave the front wheels a good cleaning.

K9Leader

Good choice. I've gone a while without cleaning my wheels with the Akebonos and barely have any dust

Nickco43 · 09-16-2018, 06:16 PM

I sold my non heated seats today. I am out of pocket $50 for my heated seat retrofit.

Darian1789 · 09-17-2018, 06:29 PM

Finally got my wheels on. Now I need to adjust the coils and just a tad more fender work in the rear.

tcphoto · 09-17-2018, 06:44 PM

But they extend way past the fenders.

ckanderson · 09-17-2018, 08:22 PM

Quote:

Originally Posted by jasons335xi

trying to find the problem with missfire on #6 cylinder getting spark new plugs and switched coil packs stays on #6 any suggestions?

injector, compression, carbon buildup, valves....

Darian1789 · 09-17-2018, 08:24 PM

Quote:

Originally Posted by tcphoto

But they extend way past the fenders.

They are 18x12. When I lower it. It will tuck in. Not worried about the poke

pizza_nightmare · 09-17-2018, 11:14 PM

Ditched my staggered 18-inch VMRs for OEM 17s with 50 series sidewalls. I gotta get around NYC without my car breaking apart over every bump.

Adjusting the rear coilovers was such a pain in the ass. Still need to go up about an inch in the rear. No rubbing through over a 300 mike road trip with rear passengers!

Next is getting rid of the BC Racing coilovers for the Bilstein pro kit when it becomes available.

CTinline-six · 09-18-2018, 09:21 AM

Quote:

Originally Posted by pizza_nightmare

Ditched my staggered 18-inch VMRs for OEM 17s with 50 series sidewalls. I gotta get around NYC without my car breaking apart over every bump.

Adjusting the rear coilovers was such a pain in the ass. Still need to go up about an inch in the rear. No rubbing through over a 300 mike road trip with rear passengers!

Next is getting rid of the BC Racing coilovers for the Bilstein pro kit when it becomes available.

I don't blame you. My first trip through NYC a few years ago I cracked one of the 16's on the 325. I'm usually good at dodging pot holes but somehow missed a giant canyon in the road. I thought I broke a front control arm.

Today I parked the 328 for a few days. The valve cover smoke is getting really bad. I popped the hood and could literally see oil dripping on the cat converters. I have the N51 so it should be covered under SULEV warranty. Have a dealer appointment Monday and a little worried about bringing it to them given past experiences with dealers... but we will see.

Socket · 09-18-2018, 09:28 AM

complete auto to manual conversion and 7670 ST reinstall

CTinline-six · 09-18-2018, 09:39 AM

Quote:

Originally Posted by Socket

complete auto to manual conversion and 7670 ST reinstall

Seattlesquash · 09-18-2018, 01:40 PM

Quote:

Originally Posted by Socket

complete auto to manual conversion and 7670 ST reinstall

You are so intense with your projects, very impressive sir and will follow your guide on the mirror upgrade in the near future!

Nickco43 · 09-18-2018, 02:06 PM

The forum famous BMW multi tool is back. It was too difficult for a professional locksmith to use and can be only operated by some guy in his garage. I hate eBay.

iScramble · 09-18-2018, 05:21 PM

New plugs and coils!

TeinBMW · 09-18-2018, 05:38 PM

i've barely driven my car this summer...I should go home and drive it.

M_Torx · 09-18-2018, 07:36 PM

Hot air intake but why...colder the better just making intercooler less effective... would have been easy to run down low in front somewhere or to the stock inlets

unrulyteach · 09-18-2018, 09:22 PM

Quote:

Originally Posted by pizza_nightmare

Ditched my staggered 18-inch VMRs for OEM 17s with 50 series sidewalls. I gotta get around NYC without my car breaking apart over every bump.

Adjusting the rear coilovers was such a pain in the ass. Still need to go up about an inch in the rear. No rubbing through over a 300 mike road trip with rear passengers!

Next is getting rid of the BC Racing coilovers for the Bilstein pro kit when it becomes available.

How many miles on coilovers?

kbsmth · 09-19-2018, 12:29 AM

Fixed my seatbelt butlers and replaced my faded sidemarkers with fresh oem markers.

pizza_nightmare · 09-19-2018, 01:37 AM

Quote:

Originally Posted by unrulyteach

Quote:

Originally Posted by pizza_nightmare

Ditched my staggered 18-inch VMRs for OEM 17s with 50 series sidewalls. I gotta get around NYC without my car breaking apart over every bump.

Adjusting the rear coilovers was such a pain in the ass. Still need to go up about an inch in the rear. No rubbing through over a 300 mike road trip with rear passengers!

Next is getting rid of the BC Racing coilovers for the Bilstein pro kit when it becomes available.

How many miles on coilovers?

Quote:

Originally Posted by unrulyteach

Quote:

Originally Posted by pizza_nightmare

Ditched my staggered 18-inch VMRs for OEM 17s with 50 series sidewalls. I gotta get around NYC without my car breaking apart over every bump.

Adjusting the rear coilovers was such a pain in the ass. Still need to go up about an inch in the rear. No rubbing through over a 300 mike road trip with rear passengers!

Next is getting rid of the BC Racing coilovers for the Bilstein pro kit when it becomes available.

How many miles on coilovers?

To be honest I'm not sure

Socket · 09-19-2018, 08:54 AM

Quote:

Originally Posted by Seattlesquash

You are so intense with your projects, very impressive sir and will follow your guide on the mirror upgrade in the near future!

Thanks Seattle appreciate the kind words

Socket · 09-19-2018, 09:01 AM

Quote:

Originally Posted by AP888

Hot air intake but why...colder the better just making intercooler less effective... would have been easy to run down low in front somewhere or to the stock inlets

Agree AP, tbh there is simply no room down there, oil coolers take up the space under the headlights, the CFS radiator takes up the room behind the radiator support and the PSP 900i takes up the room in front. Turbo is too close to the radiator support to fit a stumpy pod, in fact the rad support had to been trimmed to give the 4" 90 degree silicone elbow enough clearance to fit the ss pipe. Without ordering a custom pod filter there is no room even to put a pod between the engine and the fan due to water and oil lines etc.... The only real option is a turbo guard... but not a fan

09-15-2018, 09:40 PM	#7041
K9Leader Captain 1137 Rep 812 Posts Drives: 2010 328ix E91, 2011 128i E82 Join Date: Feb 2018 Location: Delaware iTrader: (0) Garage List 2011 BMW 128i [10.00] 2010 BMW 328i [10.00]	Have finally had it with all the dust from the Textar pads on the front so put on some Akebono ceramics and gave the front wheels a good cleaning. K9Leader
	Appreciate 1 spencers199.00 Quote

09-16-2018, 06:16 PM	#7044
Nickco43 Lieutenant Colonel 1577 Rep 1,942 Posts Drives: 2017 BMW 540i Join Date: Apr 2018 Location: Denver, CO iTrader: (1) Garage List 2017 BMW [0.00]	I sold my non heated seats today. I am out of pocket $50 for my heated seat retrofit.
	Appreciate 1 IllSic_Design2125.00 Quote

09-17-2018, 06:29 PM	#7045
Darian1789 Private 8 Rep 57 Posts Drives: 2007 BMW 335i Join Date: May 2017 Location: Northern VA iTrader: (0)	Finally got my wheels on. Now I need to adjust the coils and just a tad more fender work in the rear. Attached Images
	Appreciate 0 Quote

09-17-2018, 06:44 PM	#7046
tcphoto Brigadier General 4203 Rep 3,253 Posts Drives: E92 335i 6MT Coupe Join Date: Dec 2009 Location: Nashville, TN iTrader: (1)	But they extend way past the fenders. __________________
	Appreciate 0 Quote

09-17-2018, 11:14 PM	#7049
pizza_nightmare Private First Class 17 Rep 130 Posts Drives: 2007 BMW 328xi Join Date: Aug 2018 Location: New York City iTrader: (0)	Ditched my staggered 18-inch VMRs for OEM 17s with 50 series sidewalls. I gotta get around NYC without my car breaking apart over every bump. Adjusting the rear coilovers was such a pain in the ass. Still need to go up about an inch in the rear. No rubbing through over a 300 mike road trip with rear passengers! Next is getting rid of the BC Racing coilovers for the Bilstein pro kit when it becomes available. Attached Images
	Appreciate 0 Quote

09-18-2018, 09:28 AM	#7051
Socket Lieutenant General 4685 Rep 11,957 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	complete auto to manual conversion and 7670 ST reinstall Attached Images
	Appreciate 4 CTinline-six6942.50 Seattlesquash977.50 tcphoto4203.00 Echoninety85.00 Quote

09-18-2018, 02:06 PM	#7054
Nickco43 Lieutenant Colonel 1577 Rep 1,942 Posts Drives: 2017 BMW 540i Join Date: Apr 2018 Location: Denver, CO iTrader: (1) Garage List 2017 BMW [0.00]	The forum famous BMW multi tool is back. It was too difficult for a professional locksmith to use and can be only operated by some guy in his garage. I hate eBay.
	Appreciate 0 Quote

09-18-2018, 05:21 PM	#7055
iScramble Private First Class 77 Rep 128 Posts Drives: 2013 F30 335i Join Date: Jul 2018 Location: Laurel, MD iTrader: (0)	New plugs and coils! Attached Images
	Appreciate 0 Quote

09-18-2018, 05:38 PM	#7056
TeinBMW Lieutenant Colonel 134 Rep 1,946 Posts Drives: 2011 335xi Msport, Conv, Tech Join Date: May 2013 Location: Calgary iTrader: (2) Garage List 2011 BMW 335xi [7.00]	i've barely driven my car this summer...I should go home and drive it. __________________ \|11 335XI N55 \| M SPORT \| VRSF CP \| BMW PE \| BMS INSTAKE \| VRSF 7" IC \| MHD STAGE 2+ \| ER CP \|
	Appreciate 0 Quote

09-18-2018, 07:36 PM	#7057
M_Torx First Lieutenant 441 Rep 401 Posts Drives: M Join Date: Jul 2018 Location: Ontario iTrader: (0)	Hot air intake but why...colder the better just making intercooler less effective... would have been easy to run down low in front somewhere or to the stock inlets Attached Images __________________ TTP
	Appreciate 0 Quote

09-19-2018, 12:29 AM	#7059
kbsmth Enlisted Member 25 Rep 38 Posts Drives: 2007 E92 335i 6MT Join Date: Nov 2017 Location: Dallas iTrader: (0)	Fixed my seatbelt butlers and replaced my faded sidemarkers with fresh oem markers.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search