iPhone Procede Boost Gauge / Datalogging / Map Switching - Interest?

dmurray14 · 04-30-2009, 05:28 PM

Quote:

Originally Posted by Mike@N54Tuning.com

Actually we have JB3 boards out with DB9 connectors. They communicate to the tuning gauge via RS232. You may find a lot of interest for something like this among JB3 owners as well. Looks like a really neat product.

Mike

I wasn't aware of that, my fault. We'll have to see where things go! For now, I will certainly be focusing on the Procede because that's where I have the experience.

brianhn1 · 04-30-2009, 07:57 PM

Some comments:

1. I use an HTC WM6 phone and wifi tends to be highly power taxing on the battery of the phone. Would you consider trying Bluetooth?
2. The iPhone is terrible with multitasking software. Any way you could 'lock' the software to dedicate the phone to just running itself?
3. It seems like you'll be using the same concept as Rev to communicate to the hardware. But their CANbus to Wifi adapter is expensive! I hope it is no where near that pricey.

dmurray14 · 04-30-2009, 08:04 PM

Quote:

Originally Posted by brianhn1

Some comments:

1. I use an HTC WM6 phone and wifi tends to be highly power taxing on the battery of the phone. Would you consider trying Bluetooth?
2. The iPhone is terrible with multitasking software. Any way you could 'lock' the software to dedicate the phone to just running itself?
3. It seems like you'll be using the same concept as Rev to communicate to the hardware. But their CANbus to Wifi adapter is expensive! I hope it is no where near that pricey.

1. Probably not. Wifi for a bunch of reasons. Just get the car charger, if you're going to keep it on your dash as a gauge it should be powered anyway!

2. I'm not sure what you mean. The iPhone can't multitask, at least not unless you're jailbroken. It will only run one app at a time.

3. A similar concept, yes. Again I don't want to make promises I can't keep but the plan is to make the whole setup as cheap as possible!

Hope that helps!

Dan

brianhn1 · 04-30-2009, 08:08 PM

Quote:

Originally Posted by dmurray14

1. Probably not. Wifi for a bunch of reasons. Just get the car charger, if you're going to keep it on your dash as a gauge it should be powered anyway!

2. I'm not sure what you mean. The iPhone can't multitask, at least not unless you're jailbroken. It will only run one app at a time.

3. A similar concept, yes. Again I don't want to make promises I can't keep but the plan is to make the whole setup as cheap as possible!

Hope that helps!

Dan

Great answers.

Regarding question 2, I'll give an example: let's say you're data logging and all of the sudden someone decides to call you. It would most likely close the app and bring the phone app up, correct? Unless you know how to disable the phone part without taking out the sim card (the only option I have found).

dmurray14 · 04-30-2009, 08:10 PM

Quote:

Originally Posted by brianhn1

Great answers.

Regarding question 2, I'll give an example: let's say you're data logging and all of the sudden someone decides to call you. It would most likely close the app and bring the phone app up, correct? Unless you know how to disable the phone part without taking out the sim card (the only option I have found).

Ah, I see what you're saying. To be honest, I'm not entirely sure. My gut reaction was to suggest "Airplane Mode" but that would, of course, disable wireless as well. I'll have to look into it...

Slidewayz · 04-30-2009, 09:27 PM

Quote:

Originally Posted by dmurray14

Ah, I see what you're saying. To be honest, I'm not entirely sure. My gut reaction was to suggest "Airplane Mode" but that would, of course, disable wireless as well. I'll have to look into it...

I would love to help, but Alas! I am strictly a coin-operated machine.

This sounds great and I hope you make big, greasy gobs of $$$.

dmurray14 · 04-30-2009, 10:20 PM

Quote:

Originally Posted by Slidewayz

I would love to help, but Alas! I am strictly a coin-operated machine.

This sounds great and I hope you make big, greasy gobs of $$$.

Thanks, but that's definitely NOT my goal.

ssabripo · 04-30-2009, 10:30 PM

Quote:

Originally Posted by dmurray14

Sorry, but that's not going to happen. The JB3 is not compatible.

Well 63 "interested"s, I guess it's a go!

there is a JB3 box with a rs-232 db9 connector, which is used for the gauge... very easily you could tap into that.

and if you really REALLY wanna be fancy, you could add a bluetooth connection there, using the SPP profile to convert the bluetooth request to serial commands back and forth, and you can have it all done wirelessly!

the sky is the limit on how far you wanna go.

dmurray14 · 04-30-2009, 10:34 PM

Quote:

Originally Posted by ssabripo

there is a JB3 box with a rs-232 db9 connector, which is used for the gauge... very easily you could tap into that.

and if you really REALLY wanna be fancy, you could add a bluetooth connection there, using the SPP profile to convert the bluetooth request to serial commands back and forth, and you can have it all done wirelessly!

the sky is the limit on how far you wanna go.

It is wireless (did you see the vid

). Not bluetooth though, I have my reasons.

dmurray14 · 04-30-2009, 10:44 PM

Quote:

Originally Posted by got psi

im sure shiv will need to implement some sort of password protection for the user software to be able to modify settings on the procede for this to work. Unless you plan to marry the wireless hardware to each phone's serial number/data string.

as much as i would like to load a valet map to the guy sitting at the light next to me before i blow his doors off.... i dont think i would be a good idea. lol

im sure you thought of this already... just throwing it out there.

Yep...plan is to pair the phone to the unit!

dmurray14 · 04-30-2009, 10:49 PM

Quote:

Originally Posted by got psi

i see where you're going with this. NICE!!

i'll drink to that...

BTW: Matt Damon > This thread

Haha!

gqmd · 05-07-2009, 08:55 PM

Doing WM6 is a good idea..especially since it may be the easier task. Most people still don't have the iphone, at least until Verizon comes into the picture. Even though I don't have a tune, just trying to be logical...I would never switch to ATT reception just to get an iphone. I tried it...outside of nyc metro...where I travel only Verizon works.

darkphantom · 05-07-2009, 09:23 PM

If you add symbian, I'd be in, but then again, this product, if made, would be limited to your choices.

cincy335i · 05-07-2009, 10:07 PM

Yep, interested. Sounds really cool!

#1Stunna · 05-07-2009, 10:51 PM

Yup me too

gian335 · 05-08-2009, 12:46 AM

hopefully this will actually happen for the iphone, a great Idea might i add.

0002s · 05-08-2009, 06:14 PM

dmurray14

I just got the BT data tool and if you added a Bluetooth USB connector and used iPhone 3.0 as the reader based on what BT software does you'd have one hell of a tool.

Christian_H · 05-14-2009, 05:25 PM

Cant wait for the WM6 to be done, and luckely my Xperia can multitask =)
Would it be possible to get it to work using the usb-serial, or is wifi the only possible solution ?

//Christian (Waiting for my procede to come =) )

335iheLLraiseR · 05-14-2009, 07:28 PM

any updates?

nood1es · 05-14-2009, 10:44 PM

anyway you could do this for the jb3?

dmurray14 · 05-14-2009, 11:54 PM

Quote:

Originally Posted by 335iheLLraiseR

any updates?

Unfortunately, no, I've been absolutely SWAMPED with work recently and probably will be for another week, then I can get to working on this. Just need to find the time.

Quote:

Originally Posted by nood1es

anyway you could do this for the jb3?

Perhaps, but for starters it will be Procede only.

DALAS335I · 05-15-2009, 01:17 AM

i would jump on procede for sure with this nicee!!

View Poll Results: Would you be interested in a wireless Procede for iPhone/iPod/Windows Mobile 6?
Yes, absolutely!	247	79.17%
Maybe, depending on features (please explain!)	32	10.26%
No, that's a horrible idea	4	1.28%
matt damon	29	9.29%
Voters: 312. You may not vote on this poll

04-30-2009, 07:57 PM	#68
brianhn1 Slow Mo 15 Rep 534 Posts Drives: BMW Join Date: Jun 2008 Location: US iTrader: (0)	Some comments: 1. I use an HTC WM6 phone and wifi tends to be highly power taxing on the battery of the phone. Would you consider trying Bluetooth? 2. The iPhone is terrible with multitasking software. Any way you could 'lock' the software to dedicate the phone to just running itself? 3. It seems like you'll be using the same concept as Rev to communicate to the hardware. But their CANbus to Wifi adapter is expensive! I hope it is no where near that pricey. __________________ BMW '17 X5 35i, '15 M4, ED 7/1/14, US 8/4/14, PU 8/18/14, '13 X5 35i, '08 335i Motorcycles: BMW '12 R1200GS, '10 F800GS, '74 R90S
	Appreciate 0 Quote

05-07-2009, 08:55 PM	#78
gqmd Chemo Doc 9 Rep 470 Posts Drives: e92 335i 6MT Join Date: Jun 2006 Location: Maryland/DC iTrader: (0)	Doing WM6 is a good idea..especially since it may be the easier task. Most people still don't have the iphone, at least until Verizon comes into the picture. Even though I don't have a tune, just trying to be logical...I would never switch to ATT reception just to get an iphone. I tried it...outside of nyc metro...where I travel only Verizon works. __________________ jet black 335i, 6MT manual, black interior with silver aluminum trim, PP, SP.
	Appreciate 0 Quote

05-07-2009, 09:23 PM	#79
darkphantom Banned 629 Rep 5,945 Posts Drives: E93 335i Join Date: Aug 2007 Location: The place for Bimmers iTrader: (4)	If you add symbian, I'd be in, but then again, this product, if made, would be limited to your choices.
	Appreciate 0 Quote

05-07-2009, 10:07 PM	#80
cincy335i Lieutenant 80 Rep 418 Posts Drives: '08 Black Saph 335i coupe 6mt Join Date: Mar 2009 Location: Cincinnati, Ohio iTrader: (0)	Yep, interested. Sounds really cool!
	Appreciate 0 Quote

05-07-2009, 10:51 PM	#81
#1Stunna Enlisted Member 11 Rep 31 Posts Drives: '09 e92 m3, e92 335i Join Date: Apr 2009 Location: Earth iTrader: (1)	Yup me too
	Appreciate 0 Quote

05-08-2009, 12:46 AM	#82
gian335 Major 37 Rep 1,031 Posts Drives: e92 335 Join Date: Apr 2008 Location: uknown iTrader: (1)	hopefully this will actually happen for the iphone, a great Idea might i add.
	Appreciate 0 Quote

05-08-2009, 06:14 PM	#83
0002s Mein Führer! I can walk! 45 Rep 822 Posts Drives: Not a BMW Join Date: Apr 2008 Location: Bunker iTrader: (0)	dmurray14 I just got the BT data tool and if you added a Bluetooth USB connector and used iPhone 3.0 as the reader based on what BT software does you'd have one hell of a tool.
	Appreciate 0 Quote

05-14-2009, 05:25 PM	#84
Christian_H Private 7 Rep 63 Posts Drives: E92 335 -07 E31 850 -91 Join Date: Mar 2007 Location: Sweden iTrader: (0)	Cant wait for the WM6 to be done, and luckely my Xperia can multitask =) Would it be possible to get it to work using the usb-serial, or is wifi the only possible solution ? //Christian (Waiting for my procede to come =) )
	Appreciate 0 Quote

05-14-2009, 10:44 PM	#86
nood1es Captain 31 Rep 673 Posts Drives: E70 Join Date: May 2007 Location: Madison, WI iTrader: (10)	anyway you could do this for the jb3?
	Appreciate 0 Quote

05-15-2009, 01:17 AM	#88
DALAS335I Enlisted Member 0 Rep 35 Posts Drives: 335I Join Date: Nov 2008 Location: LA'S WEST SIDE iTrader: (0)	i would jump on procede for sure with this nicee!!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search