|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
 |
|
BMW 3-Series (E90 E92) Forum
>
EuroStance | AC Schnitzer pedals for AT and MT!
|
 |
| 02-21-2010, 02:51 PM | #69 |
|
Private First Class
 
27
Rep 189
Posts |
Pedals
Received my pedals last week. AWESOME. The fit is perfect on the gas and brake. The dead pedal is a little shorter than the stock black plastic piece of junk but if you position it well when installing it looks sharp and you wont even notice that it is shorter. No instructions sent with it, but its pretty straight forward and the DIY section tell you how to do it. The only hard part, (not really hard just more time consuming than the other pedals install) is the drilling of the brake pedal. It is probably a good idea to use a punch to start before drilling the holes on the brake pedal so you get the right spot.
The bolts are a little long on the accelerator pedal for the top two as you want to shorten them so you can hit the "wholly sh*t" switch when you push it all the way down. I just cut them with a hacksaw and filed the edges a bit. No prob. Other than that, the DIY install is spot on and it is relatively easy. They look awesome!! Thanks again!!
__________________
Thanks
Stylin20 |
|
Appreciate
0
|
 |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
