Vishnu Procede PWM Meth kit and Final Dynos

Syndicategt · 05-04-2011, 03:42 PM

Quote:

Originally Posted by CPWINCH

So technically this will eliminate the need for an aftermarket intercooler? heastsoak wise

Think about it as passive (FMIC) vs active (Meth) cooling. It doesn't completely eliminate the need for a FMIC as you do not spray meth all the time. What he means is the meth system is so efficient it can lower the IATs enough to eliminate heat soak when it is sprayed.

335iPSI · 05-04-2011, 04:06 PM

Wallet ready to go.

I'm glad to see these kind of gains --- which lets you have a "switchable" power source --- I dont need to cruise to work with 400whp --- but if someone wants a quick run on the way home, I'm 2 clicks away from 125hp gain. Sweet.

EastBayE90 · 05-04-2011, 04:08 PM

And this is perfect in my case where I'm trying to get as much power as possible without doing the front mount and the downpipes. This will enable me to get the car back to stock in less than an hour for when I need to take the car in for service.
Later on when I'm out of warranty I can do the FMIC and DP's. Kind of doing the tuning ass backwards. This will be a great option for those who don't want to mess with the dp's or fmic yet. 400whp in less than 30 min

Dmacc · 05-04-2011, 04:10 PM

Quote:

Originally Posted by (-(ellblazer420

And this is perfect in my case where I'm trying to get as much power as possible without doing the front mount and the downpipes. This will enable me to get the car back to stock in less than an hour for when I need to take the car in for service.
Later on when I'm out of warranty I can do the FMIC and DP's. Kind of doing the tuning ass backwards. This will be a great option for those who don't want to mess with the dp's or fmic yet. 400whp in less than 30 min

I never thought of it that way, but I like the way you think.

e90fun · 05-04-2011, 04:40 PM

Quote:

Originally Posted by (-(ellblazer420

And this is perfect in my case where I'm trying to get as much power as possible without doing the front mount and the downpipes. This will enable me to get the car back to stock in less than an hour for when I need to take the car in for service.
Later on when I'm out of warranty I can do the FMIC and DP's. Kind of doing the tuning ass backwards. This will be a great option for those who don't want to mess with the dp's or fmic yet. 400whp in less than 30 min

that is how i see it.
the ability to be able to remove it all in one space in less than an hour for service is amazing.
plus 400+ power must be fun for DD.

EastBayE90 · 05-04-2011, 05:04 PM

Quote:

Originally Posted by e90fun

that is how i see it.
the ability to be able to remove it all in one space in less than an hour for service is amazing.
plus 400+ power must be fun for DD.

Exactly this is my DD and I don't want taking my car into the dealer to be a hassle. Everything is right under the hood. You don't even have to get on the ground or lift the car up. This will be an awesome power package PROcede, DCI and PWM meth.

mithiral67 · 05-04-2011, 05:30 PM

Where will the pump be located and what concern is there for misting and water causing the pump to fail?

mke135i · 05-04-2011, 05:31 PM

Using a 15% drive-train loss, those numbers represent 485hp / 505tq at the flywheel.

jpsimon · 05-04-2011, 05:39 PM

Quote:

Originally Posted by mithiral67

Where will the pump be located and what concern is there for misting and water causing the pump to fail?

everything is in the engine bay

mithiral67 · 05-04-2011, 05:42 PM

Quote:

Originally Posted by jpsimon

everything is in the engine bay

I understand this, more, where in the engine bay, lower down where it might get more mist, higher up in a low wind areas. If you have scoops will they blast moisture into it?

As I understand it, aquamist pumps are not waterproof.

Mikey_Bo0sts · 05-04-2011, 05:45 PM

Quote:

Originally Posted by (-(ellblazer420

And this is perfect in my case where I'm trying to get as much power as possible without doing the front mount and the downpipes. This will enable me to get the car back to stock in less than an hour for when I need to take the car in for service.
Later on when I'm out of warranty I can do the FMIC and DP's. Kind of doing the tuning ass backwards. This will be a great option for those who don't want to mess with the dp's or fmic yet. 400whp in less than 30 min

Lmao I want to see you race a car with dp's and fmic then, dyno don't mean SH*T !!!

scottp999 · 05-04-2011, 06:34 PM

pre-order payment just sent. Can't wait!

Syndicategt · 05-04-2011, 06:40 PM

Quote:

Originally Posted by mithiral67

As I understand it, aquamist pumps are not waterproof.

My pump sits right behind my bumper and has been working 100% fine for over a year. I don't think there is an issue if they get wet.

OpenFlash · 05-04-2011, 06:44 PM

Quote:

Originally Posted by mithiral67

I understand this, more, where in the engine bay, lower down where it might get more mist, higher up in a low wind areas. If you have scoops will they blast moisture into it?

As I understand it, aquamist pumps are not waterproof.

Good thing we don't tune boats!

e90fun · 05-04-2011, 06:46 PM

Quote:

Originally Posted by shiv@vishnu

Good thing we don't tune boats!

.. maybe in the near future.

cant wait, hopefully by the time I get back home for summer break, these will be out and I can do a local pick up!

mithiral67 · 05-04-2011, 07:04 PM

Quote:

Originally Posted by shiv@vishnu

Good thing we don't tune boats!

Ha, nice.

But seriously, where is it located?

OpenFlash · 05-04-2011, 07:09 PM

Quote:

Originally Posted by mithiral67

Ha, nice.

But seriously, where is it located?

Look at the pictures on page 1.

mithiral67 · 05-04-2011, 07:20 PM

Quote:

Originally Posted by shiv@vishnu

Look at the pictures on page 1.

ugh, i was so busy looking at the charge pipe, i forgot to play i spy what else is difference with this picture.

Brey335i · 05-04-2011, 07:26 PM

Quote:

Originally Posted by mithiral67

Quote:

Originally Posted by shiv@vishnu

Look at the pictures on page 1.

ugh, i was so busy looking at the charge pipe, i forgot to play i spy what else is difference with this picture.

I spy??? It's a big pump smack in the middle of the picture

mithiral67 · 05-04-2011, 07:35 PM

Quote:

Originally Posted by Brey335i

I spy??? It's a big pump smack in the middle of the picture

Who didnt know what a meth pump looks like before looking at that picture? This guy. I wasnt aware that they were so big.

EastBayE90 · 05-04-2011, 07:35 PM

Quote:

Originally Posted by Mikey_Bo0sts

Lmao I want to see you race a car with dp's and fmic then, dyno don't mean SH*T !!!

We will see we will see muhahahah

Doug007 · 05-04-2011, 07:44 PM

Quote:

Originally Posted by scottp999

pre-order payment just sent. Can't wait!

Where are people sending preorders? I haven't even seen a price for the kit released yet.

05-04-2011, 04:06 PM	#68
335iPSI PSI 15 Rep 349 Posts Drives: 2011 AW 335D Join Date: Mar 2009 Location: FL iTrader: (2)	Wallet ready to go. I'm glad to see these kind of gains --- which lets you have a "switchable" power source --- I dont need to cruise to work with 400whp --- but if someone wants a quick run on the way home, I'm 2 clicks away from 125hp gain. Sweet. __________________ 2011 335d, M-sport, Alpine White, Nav
	Appreciate 0 Quote

05-04-2011, 04:08 PM	#69
EastBayE90 Formerly (-(ellblazer420 48 Rep 703 Posts Drives: 07 E90 335i M/T, 15 F80 M3 DCT Join Date: Sep 2010 Location: SF East Bay, CA iTrader: (0) Garage List 2007 BMW 335I E90 [8.84]	And this is perfect in my case where I'm trying to get as much power as possible without doing the front mount and the downpipes. This will enable me to get the car back to stock in less than an hour for when I need to take the car in for service. Later on when I'm out of warranty I can do the FMIC and DP's. Kind of doing the tuning ass backwards. This will be a great option for those who don't want to mess with the dp's or fmic yet. 400whp in less than 30 min __________________ (410whp 445ft/lbs \| DCI + Meth Only) OpenFlash OTS Stage 1 Flash \| Vishnu PWM Meth Kit \| Vishnu DCI\| Forge DVs
	Appreciate 0 Quote

05-04-2011, 05:30 PM	#73
mithiral67 That guy 122 Rep 5,740 Posts Drives: 2015 Cayman GTS Join Date: Jun 2008 Location: Chicago Burbs iTrader: (4) Garage List 2015 Porsche Cayman ... [0.00]	Where will the pump be located and what concern is there for misting and water causing the pump to fail?
	Appreciate 0 Quote

05-04-2011, 05:31 PM	#74
mke135i Lieutenant 19 Rep 436 Posts Drives: 2008 BMW 135i Cabrio Join Date: Oct 2010 Location: Midwest iTrader: (3) Garage List 2008 135i [0.00]	Using a 15% drive-train loss, those numbers represent 485hp / 505tq at the flywheel.
	Appreciate 0 Quote

05-04-2011, 06:34 PM	#78
scottp999 Brigadier General 138 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	pre-order payment just sent. Can't wait!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search