[khurmit]

Originally Posted by makkan00

Have you added Combox into the VA?
Also use 0311 production date.
Add:
Combox into VA
$620 voice control
$633 BMW phone prep (try this rather trying $644)
$7SP

Store the new VA in CAS and FRM.
Code CAS, FRM and JBBF to reset and report back.

Hey Makkan - what is $7SP? I can't find a description for that.

[cryptomit]

$7sp Navi Professional/m.-ph.prep. Bluetooth

[khurmit]

Originally Posted by cryptomit

$7sp Navi Professional/m.-ph.prep. Bluetooth

Cheers!

[Thriller]

Hi to all,

Some month ago I Installed a brand new combox media in my car (E91 lci) with high cic. I updated the cic firmware to .c16 version to have full compatibility with cbx and to have app free without fcs.

It worked all fine except one thing. Sometimes randomly I have this error:

A8F9 : CBX-MEDIA: Software reset that is very annoying because the BT connection drops and cbx reboot.

In a first time I thought the problem could be caused by too high power consumption of phone (iphone 6) when connected to usb socket (an italian installer told me that iphone 6 has this kind of problems and that I could resolve it by installing the baseplate for the phone).

I made other test and found that the problem isn't strictly correlated to the phone plugged into the usb socket. Infact I made a modify USB cable that doesn't charge the phone but after sometime I had the same error and after some days I had the error also with the phone unplugged from the usb socket.

Now, after several days that I haven't anymore the error, I think that the cbx reset occurs sometime when the phone tethering is disabled and cbx is asking data to the phone. Is that possible?

There are so many parameters in its FSW_PSW and I don't know what I can try to change to solve the problem....

For Example what about

SWUP_CYCLIC_RST_THRESHOLD

or

SWUP_CYCLIC_RESET_TIMEOUT

or

SWUP_CYCLIC_MONITORING

This is my configuration. Could some one have a look and tell me something if there are any errors? Please help me because in Italy I a have a lot of difficulties to receive any help from who knows.

TYP_LENKUNG
rechtslenker
SPRACHE
deutsch
BT_UFN
wert_01
USED_MICROPHONES
wert_01
PHONE_TYPE_JAPAN
nicht_aktiv
RINGTONE
ringtone_1
RSE_HIGH
nicht_aktiv
TDA_CFG_CUST_MOBILE_USE_M
aktiv
TDA_DEACTIVATE_STATUS_M
nicht_aktiv
BT_OBJECT_PUSH
nicht_aktiv
MICROPHONE_SENSITIVITY
l4_mic
PB_DOWNLOAD_PRIORITY
wert_03
INBAND_RINGING
aktiv
CONFIG_INDEX
config_index_3
DPAS_INDEX
dpas_3
TESTCALL_FLAG_ENABLE
nicht_aktiv
A2DP_AVRCP_EIN_AUS
aktiv
AKD_SUPPORTED_POIS
wert_25
API_EIN_AUS_MED
aktiv
API_IPOD_ONE_WIRE
aktiv
API_IPOD_TWO_WIRE_SERIEL
aktiv
API_TWO_USB_M
aktiv
AUDIO_NOTES_EIN_AUS
aktiv
AUDIO_SOURCE_FILE
file_1
AUDIO_VERSTAERKER
wert_01
AVRCP_BROWSING_EIN_AUS
aktiv
CALENDAR_EIN_AUS
aktiv
CAR_TYPE_IPOD_LOGO
bmw
CONTACT_NUMBERS_BCALL_M
nicht_aktiv
CONTACT_NUMBERS_DEALER_M
nicht_aktiv
CONTACT_NUMBERS_HOTLINE_M
nicht_aktiv
CONTACTS_EIN_AUS
aktiv
DATACOMM_CSIM
aktiv
DATACOMM_INTERFACE
mamac
DRM_CHIP_ENABLED
aktiv
DUN_PROFILE_M
aktiv
EMAIL_EIN_AUS
aktiv
EXTERNAL_CALL_LISTS_M
aktiv
FBLOCK_PHONEBOOK_EIN_AUS
nicht_aktiv
GPS_FROM_MOST
aktiv
GPS_POSITION_TIMEOUT
wert_01
HEAD_BOOT_UP_TIMEOUT
wert_15
HEAD_UNIT_MODEL
cic_high_rueko
HEATING_CONTROL_ENABLED
aktiv
HORN_CONTROL_ENABLED
nicht_aktiv
INCOMING_CALL_LIST_M
aktiv
IP_ROUTER
aktiv
LIGHT_CONTROL_ENABLED
nicht_aktiv
M_SECURITY_MODE_AEH
des_cbc
M_SECURITY_MODE_AEP
aes_128
M_SECURITY_MODE_ASH
des_cbc_mac
M_SECURITY_MODE_ASP
hmac_sha_256
MAIN_BOARD_ALONE
mainboard_alone
MED_SVS_EIN_AUS
aktiv
MMS_EIN_AUS
nicht_aktiv
MULTI_PARTY_CALL_M
aktiv
MY_INFO_SUPPORTED_POIS
wert_25
ONLINE_ROUTER
aktiv
PHONEBOOK_NAME_DISP_ORD_M
last_first
PICTURE_VIEWER_EIN_AUS
aktiv
PIM_BILDER_EIN_AUS
aktiv
POWER_FOLLOW_UP_THRESHOLD
wert_01
RDL_CONTROL
aktiv
RDU_CONTROL_ENABLED
aktiv
REMINDER_EIN_AUS
aktiv
REMINDER_TRIGGERS_EIN_AUS
aktiv
RESPONSE_ON_HOLD_M
nicht_aktiv
SECURE_SIMPLE_PAIRING_M
nicht_aktiv
SIM_ENABLED_MB
enabled_all
SMS_EIN_AUS_MED
aktiv
SORTING_VARIANT_M
standard
STARTUP_ACTIVE
nicht_aktiv
SVR_ENABLED
aktiv
SWUP_ASK_CONF_ENABLED
aktiv
SWUP_ENABLE_ENG_UPDATES
nicht_aktiv
SWUP_ENABLE_SW_UPDATES
aktiv
SWUP_SOURCE_ONLINE
aktiv
SWUP_SOURCE_USBMSCDD
aktiv
TASK_EIN_AUS
aktiv
TDA_CFG_IND_PDM_GR_NBR_M
file0
TDA_CFG_TSM_TRIGGER
all
TDA_FBLOCK
fblock_df
TDA_TSM_ACTIVE
aktiv
TELEMATIC_COUNTRY_VARIANT
row
TELEMATIK_VIN
most_vin
TELEX_M
aktiv
TEXT_NOTES_EIN_AUS
aktiv
UNICODE_EIN_AUS
nicht_aktiv
USB_HUB_M
nicht_aktiv
VCARD_OVER_MOST_M
aktiv
VENTILATION_CNTRL_ENABLED
aktiv
VIDEO_PLAYER_EIN_AUS
aktiv
BT_EIN_AUS_MED
aktiv
OFFSET_BTAS
wert_00
OFFSET_IPOD_SERIAL
wert_00
COVER_ART_TWO_WIRE
nicht_aktiv
ETHERNET
nicht_aktiv
PAN_PROFILE_M
aktiv
FOLLOW_UP_TIME_EXTENSION
wert_02
SWUP_CYCLIC_MONITORING
wert_20
SWUP_CYCLIC_RESET_TIMEOUT
wert_255
SWUP_CYCLIC_RST_THRESHOLD
wert_05
HANDSFREE_SECONDARY
aktiv
BMW_INFO_SUPPORTED_POIS
wert_25
SWUP_INSTALL_TIME_SWIP
nicht_aktiv
USB1_IPOD_AUDIO
digital
USB2_IPOD_AUDIO
digital

[ssshake]

There's a lot of good information in this thread, however it's quite scattered. I'm wondering if you could distill all the coding down into one post for me (and everyone). There really isn't a good concise post on coding a combox retrofit into an e9x.

All of the posts seem to be about the hardware retrofit, followed by paying someone else to do the coding. I can do my own coding but need guidance on what to add and remove for the VO and any parameters.

I just did a non-idrive to cic retrofit. I bought the cic unit and combox off my friend who had both of these working fine on his car.

It's news to me that I have to code the combox to my car vin and add some new VO options. This is what I have done since the retrofit. (By retrofit I mean, added CIC/CID to existing MULF2/TCU set up, no combox wired yet)

VO Change History
ADD REM MODULE
Removed: #0309 CAS/NFRM
Added: #0909 CAS/NFRM
Added: $6VA CAS/NFRM
Added: $609 CAS/NFRM
Removed: $663 CAS/NFRM

For the record I've plugged the combox in, and had bluetooth support and all that for a brief moment. But since then i can't seem to get it to power on (I dont see a red light in the most connector and the most circuit is left open). Not sure if I screwed something up with the wiring or worse.

Secondly can anyone provide a pinout so I can confirm the mulf and tcu connections.

[ralph530i]

Hi all,
I have retrofiited a combox in an X1 from march 2011 (E84) today.
But bluetooth is still greyed here.
I added $6VA en $644 to the VO and coded the MCIC.
Media also appears which i coded also using the expert profile.

But I cant seem to find the combox in the list.
But I also dont know what ECU name the combox has in NCS expert?

Can anyone help me with the name?

[808AWD325xi]

Originally Posted by ralph530i

Hi all,
I have retrofiited a combox in an X1 from march 2011 (E84) today.
But bluetooth is still greyed here.
I added $6VA en $644 to the VO and coded the MCIC.
Media also appears which i coded also using the expert profile.

But I cant seem to find the combox in the list.
But I also dont know what ECU name the combox has in NCS expert?

Can anyone help me with the name?

MEDIA == combox

[ralph530i]

Cheers m8,

Today i gave it a new try.
I added $6VC (in stead of $6VA) and $644 in the VO.
And coded MCIC and MEDIA with the expert profile.
Bluetooth phone and Bluetooth streaming working like a charm.

[kaputme]

Originally Posted by Thriller

Hi to all,

Some month ago I Installed a brand new combox media in my car (E91 lci) with high cic. I updated the cic firmware to .c16 version to have full compatibility with cbx and to have app free without fcs.

It worked all fine except one thing. Sometimes randomly I have this error:

A8F9 : CBX-MEDIA: Software reset that is very annoying because the BT connection drops and cbx reboot.

In a first time I thought the problem could be caused by too high power consumption of phone (iphone 6) when connected to usb socket (an italian installer told me that iphone 6 has this kind of problems and that I could resolve it by installing the baseplate for the phone).

I made other test and found that the problem isn't strictly correlated to the phone plugged into the usb socket. Infact I made a modify USB cable that doesn't charge the phone but after sometime I had the same error and after some days I had the error also with the phone unplugged from the usb socket.

Now, after several days that I haven't anymore the error, I think that the cbx reset occurs sometime when the phone tethering is disabled and cbx is asking data to the phone. Is that possible?

There are so many parameters in its FSW_PSW and I don't know what I can try to change to solve the problem....

For Example what about

SWUP_CYCLIC_RST_THRESHOLD

or

SWUP_CYCLIC_RESET_TIMEOUT

or

SWUP_CYCLIC_MONITORING

This is my configuration. Could some one have a look and tell me something if there are any errors? Please help me because in Italy I a have a lot of difficulties to receive any help from who knows.

Hi,

Did you finally solve this? if yes how? could you Please help me, i have the same issue..