[bmw5seriesman]

Originally Posted by shawnsheridan

Just the pkgdb folder and config.nfm file in Root of Fat32 Formatted USB 2.0 Drive.

It is as you suggested and FAT32 formatted USB 2.0 - However, it is in MMC Reader USB device. So it's a memory card of 32 GB which shouldn't make difference. Am I missing anything else? I managed to get the 1b file as well.

[shawnsheridan]

Originally Posted by bmw5seriesman

It is as you suggested and FAT32 formatted USB 2.0 - However, it is in MMC Reader USB device. So it's a memory card of 32 GB which shouldn't make difference. Am I missing anything else? I managed to get the 1b file as well.

I would not use SD Card. Use a traditional USB Drive.

[mjn77]

Originally Posted by shawnsheridan

I would not use SD Card. Use a traditional USB Drive.

Yes, i've not had much luck when using cards and convertors.

[fersupe]

Hi @Shawnsheridan or someone who can help..

Currently map version: 01.00.0004 Road Map JAPAN Next 2012-2
Need the New Zealand Next 2023 maps please...

Will try generating the lifetime FSC code using the methods shown in this post over the Easter break.

Thank you in advance and appreciate all the work and help.

[shawnsheridan]

Originally Posted by fersupe

Hi @Shawnsheridan or someone who can help..

Currently map version: 01.00.0004 Road Map JAPAN Next 2012-2
Need the New Zealand Next 2023 maps please...

Will try generating the lifetime FSC code using the methods shown in this post over the Easter break.

Thank you in advance and appreciate all the work and help.

You can't just load a non-Asian map in an Asian Head Unit. You need to convert NBT to ECE first. PM sent.

[dkny008]

Can anyone please tell me where can I download 2023 Canada/North America Map file for my 2010 E92?

Thanks

[shawnsheridan]

Originally Posted by dkny008

Can anyone please tell me where can I download 2023 Canada/North America Map file for my 2010 E92?

Thanks

PM sent.

[lnxguy]

I'd appreciate a link as well for 2023 NA Maps if someone has it handy.

[Dikkens]

I have Europe Move on my F20, can i use the 1b file and fsc cic for that?
I tried 4 sticks with no luck.
My short VIN: J166551

[shawnsheridan]

Originally Posted by Dikkens

I have Europe Move on my F20, can i use the 1b file and fsc cic for that?
I tried 4 sticks with no luck.
My short VIN: J166551

USB 1B Script only works with CIC Head Unit. You have CHAMP2 Head Unit. Must pull 1B with software and a Cable.

[Dikkens]

Ah ok! Can i pull it with esys? Or what software would i need? I'm in the car at the moment connected.

[shawnsheridan]

Originally Posted by Dikkens

Ah ok! Can i pull it with esys? Or what software would i need? I'm in the car at the moment connected.

If you have F-Series car, then E-Sys and ENET Cable.

[Dikkens]

Originally Posted by shawnsheridan

If you have F-Series car, then E-Sys and ENET Cable.

Coolio, yeah i do where can i find the file i'm looking for?

[shawnsheridan]

Originally Posted by Dikkens

Coolio, yeah i do where can i find the file i'm looking for?

FSC Extended, and pull 1B.

[Dikkens]

Originally Posted by shawnsheridan

FSC Extended, and pull 1B.

Thanks! No clue how to pull 1B so after some googling found this.
In case anyone needs I'll share again in this post:

Used these steps to retrieve:

FSC Extended

Base variant 0x63 (For HU_CIC or HU_NBT)
Click Identify
Application ID 0x1B for (App ID 27 for CIC) 0xDE (App ID222 for NBT) <--- This is the App for your Nav enabler
Upgrade Index 0x1

Move Store FSC from the left to the right
Click Read
Click Save and name the file FXXXXXX_0001B001.fsc for CIC or FXXXXXX_000DE001.fsc for NBT where FXXXXXX is your VIN.

[shawnsheridan]

Originally Posted by Dikkens

Thanks! No clue how to pull 1B so after some googling found this.
In case anyone needs I'll share again in this post:

Used these steps to retrieve:

[dialog]

I would appreciate some help with the following: my f01 from 11.2011 seems to have a CIC system but the script to pull the 1b file isn't working for me. Tested a few USBs to no avail. I read somewhere that my car may have some intermediary version of NBT. How do I generate the hex file otherwise?

VIN: DR97993

[shawnsheridan]

Originally Posted by dialog

I would appreciate some help with the following: my f01 from 11.2011 seems to have a CIC system but the script to pull the 1b file isn't working for me. Tested a few USBs to no avail. I read somewhere that my car may have some intermediary version of NBT. How do I generate the hex file otherwise?

VIN: DR97993

You have CIC. Are you using Glovebox USB Port, not Armrest USB Port?

[dialog]

Originally Posted by shawnsheridan

You have CIC. Are you using Glovebox USB Port, not Armrest USB Port?

Yep, glove box USB, brand new USB-stick formatted in FAT32, waited for the NAV to fully boot and then inserted the USB. Two minutes later, still nothing. Tried this several times. Not sure what I am doing wrong.

I have an enet cable and e-sys. Could you help me with the data I need to put in to pull the file this way?

[shawnsheridan]

Originally Posted by dialog

Yep, glove box USB, brand new USB-stick formatted in FAT32, waited for the NAV to fully boot and then inserted the USB. Two minutes later, still nothing. Tried this several times. Not sure what I am doing wrong.

I have an enet cable and e-sys. Could you help me with the data I need to put in to pull the file this way?

E=Sys => FSC Extended:

In the Parameter section, enter:
1. Diagnostic Address (hex) = 0x63
2. Click on the Identify button and the Base variant HU_CICwill be populated
3. Application ID for NBT= 0x1B
4. Upgrade Index = 0x1

In the Action section:
5. Select Store FSC and move from left to the right
6. Click on the Read button
7. Click Save and name the file in the following formatXXXXXXX.fsc where XXXXXXX is last seven letters/numbers of your VIN

[dialog]

Done. Generated the key successfully. Copied the maps folder, pkgdb, and the config.nmf file onto the USB. When inserted in the glove box usb, nothing happens. How can I check that the USB port is functional? ISTA?

[shawnsheridan]

Originally Posted by dialog

Done. Generated the key successfully. Copied the maps folder, pkgdb, and the config.nmf file onto the USB. When inserted in the glove box usb, nothing happens. How can I check that the USB port is functional? ISTA?

If you can copy music tracks from USB Port to CIC Drive, its working.

USB should be a 2.0 Fat32 Formatted USB Drive with pkgdb, and the config.nfm in USB root, not nested inside a folder. And if using a Mac, need to wipe hidden Mac files from USB Drive.