[bavarian19]

Originally Posted by ultimateendz

not ours you can thank the midget for that...lol

[itsbrokeagain]

Originally Posted by ultimateendz

custom sift springs and collars with koni coilovers 2300ish
m3 rear control arms 350ish
m3 rear lower camber link conversion 350ish
hp endlinks 160ish
new m3 front wishbones 250ish

then install

its a special suspension setup for the e93 str8 from harold at HP autowerks

We arent going with the DAs because they wont fit the springs..back to Koni Yellows

That should take about 1200 off the price

[itsbrokeagain]

And its only the rear M3 Control arm...not the camber link...camber is adjusted on the control arm LOL. But the velocity motorcars arms will get your tires flat on the road again

[SpmnE9zero]

Originally Posted by Matt@Camber-Toe

5 hours on the dot and the turbos are out

5? Good Grief I could pull an engine in that time!

[ultimateendz]

Originally Posted by Matt@Camber-Toe

We arent going with the DAs because they wont fit the springs..back to Koni Yellows

That should take about 1200 off the price

lol...ok about 3k then...still ...lol

[itsbrokeagain]

Originally Posted by SpmnE9zero

5? Good Grief I could pull an engine in that time!

LOL book time is 10 hours, customer pay is 16. Its a LOT of work.

Steven wants to attempt this on the ground without a lift..

[bavarian19]

So if I grew up on Long Island, that means I can partake in the postwhoring, right?

[bavarian19]

We had the DC Chat thread going for a while, but it has been dead for years.

[itsbrokeagain]

Originally Posted by bavarian19

We had the DC Chat thread going for a while, but it has been dead for years.

I think ever since the fall 2007 meet its been dead LOL

[bavarian19]

Originally Posted by Matt@Camber-Toe

LOL book time is 10 hours, customer pay is 16. Its a LOT of work.

Steven wants to attempt this on the ground without a lift..

That seems like a ton of work.


Just curious. How many hours would it take a reputable shop to install a S/C, like the ESS S/C on the new M3?

[SpmnE9zero]

Originally Posted by Matt@Camber-Toe

LOL book time is 10 hours, customer pay is 16. Its a LOT of work.

Steven wants to attempt this on the ground without a lift..

oh thats right you guys have a "real lift".....

so you are charging 16hrs and it only took 5? Nice profits there man!

[bavarian19]

Originally Posted by Matt@Camber-Toe

I think ever since the fall 2007 meet its been dead LOL

Some people were not happy about that meet. It somewhat drove a couple of people away from the forum.

[itsbrokeagain]

Originally Posted by bavarian19

That seems like a ton of work.


Just curious. How many hours would it take a reputable shop to install a S/C, like the ESS S/C on the new M3?

prolly 8-10 hours. ESS kits for the E46 took me about a day in the half when they first came out in like 02-03...I did 2 non intercooled kits and 3 intercooled ones..an air-to-air cooler in the bumper, so all the time to cut and trim and fit everything took forever...

[bavarian19]

Originally Posted by SpmnE9zero

oh thats right you guys have a "real lift".....

so you are charging 16hrs and it only took 5? Nice profits there man!

Where in pgh are you located? My parents are in the area.

[bavarian19]

Originally Posted by Matt@Camber-Toe

prolly 8-10 hours. ESS kits for the E46 took me about a day in the half when they first came out in like 02-03...they were all intercooled with an air-to-air cooler in the bumper, so all the time to cut and trim and fit everything took forever...

wow. Not that I am in the market, but I guess you have to pay to play.

[itsbrokeagain]

Originally Posted by bavarian19

Some people were not happy about that meet. It somewhat drove a couple of people away from the forum.

why? what was wrong about it? I thought it was awesome!

[bavarian19]

Originally Posted by Matt@Camber-Toe

why? what was wrong about it? I thought it was awesome!

Maybe it was a different meet. It was one that I did not attend. I think a lot of people felt pressured about a couple of things.

[SpmnE9zero]

Originally Posted by bavarian19

Where in pgh are you located? My parents are in the area.

North Hills (Wexford) you familiar?

[itsbrokeagain]

Originally Posted by SpmnE9zero

oh thats right you guys have a "real lift".....

so you are charging 16hrs and it only took 5? Nice profits there man!

what are you talking about..it took 5 to get them OUT, and I still have to swap the housings over and putting them back in, so Im looking at another 6 hours at least.

plus oil change, bleed the cooling system, fix a couple of other mistakes from other installs, should be ok.


Tryin to get Dan to change the waterpump and t-stat while im in there, but only the dealer has them (no aftermarket models out yet) and its a cool $500 just for the pump

So much for doin it this time....wait til it shits then change it LOL

[bavarian19]

Originally Posted by SpmnE9zero

North Hills (Wexford) you familiar?

My parents currently spend half of the year in Irwin. The other half in FL.


They have college friends that live in Wexford we used to visit.

[bavarian19]

Originally Posted by coldasicex5

HOLY SHIT!

....

[itsbrokeagain]

Originally Posted by bavarian19

Maybe it was a different meet. It was one that I did not attend. I think a lot of people felt pressured about a couple of things.

the one that was at Passport BMW??