Minor AccessPORT Update Coming

Rob@Cobb · 01-30-2011, 10:02 PM

Willizm and Imperator,

Would I be able to get you both to uninstall, then revert back to the release firmware, and reinstall? Please let me know if your vehicles behave differently on the release firmware. I would love to track down why you are having issues as soon as we possibly can.

Before the beta release I tested on three manuals and two steptronic cars without issue. This is a bit of surprise.

Thank you and I apologize of any inconvenience.

Rob

Willizm · 01-30-2011, 10:12 PM

Quote:

Originally Posted by Rob@Cobb

Willizm and Imperator,

Would I be able to get you both to uninstall, then revert back to the release firmware, and reinstall? Please let me know if your vehicles behave differently on the release firmware. I would love to track down why you are having issues as soon as we possibly can.

Before the beta release I tested on three manuals and two steptronic cars without issue. This is a bit of surprise.

Thank you and I apologize of any inconvenience.

Rob

Problem is rob that I tried and my car isn't supported on that release. My car got support with that Friday update and that came with bundled 2.00 maps. If you send me a map I can use with the more current firmware I could try it, but not sure if the older maps are compatible with the newer firmware. I'm steptronic just like imperator. Clap, that may be a key difference why we are seeing it and you are not.

Willizm · 01-30-2011, 10:15 PM

Btw, Rob does that data log I posted have any use to you guys? I was in a mad dash trying to document and test my findings because I had to fly out to vegas and had to leave the car behind. I figure it would help to get it resolved sooner for the next guy I suppose.

Rob@Cobb · 01-30-2011, 10:31 PM

Quote:

Originally Posted by Willizm

Btw, Rob does that data log I posted have any use to you guys? I was in a mad dash trying to document and test my findings because I had to fly out to vegas and had to leave the car behind. I figure it would help to get it resolved sooner for the next guy I suppose.

Yes Sir. I just borrowed a friends 535i and was able to reproduce what some of the auto guys are seeing. I should be able to take care of the issue pretty quick.

Cheers,
Rob

Willizm · 01-30-2011, 10:38 PM

Quote:

Originally Posted by Rob@Cobb

Quote:

Originally Posted by Willizm

Btw, Rob does that data log I posted have any use to you guys? I was in a mad dash trying to document and test my findings because I had to fly out to vegas and had to leave the car behind. I figure it would help to get it resolved sooner for the next guy I suppose.

Yes Sir. I just borrowed a friends 535i and was able to reproduce what some of the auto guys are seeing. I should be able to take care of the issue pretty quick.

Cheers,
Rob

Awesome, the best way to fix something is to have a reproducible sample. I'll be keeping my eye out for the good stuff sure to follow. If your ever in Chicago are or Vegas I'll have to buy you a beer.

mithiral67 · 01-30-2011, 10:58 PM

Hey a joliet fella. You need to find ur way to the chicagoland thread.

Alan l. · 01-30-2011, 10:59 PM

Quote:

Originally Posted by Rob@Cobb

The current release of the AP only clear the codes from the engine and transmission. Later this week I will release an update that will clear codes in all the modules as you have to speak to each module individually.

Cheers,
Rob

Rob,

Thanks for the info.

Adding this capability would be HUGE for the community and essential for the AP to be invisible to dealers. It would raise a flag without a doubt if one were to bring the car in with half a dozen module faults stored in the ecu even flashing back to stock with the AP. I've tested this several times and it seems any type of flashing will trigger these non drivetrain codes because I'm assuming the ecu loses connection to them during the flashing process.

Alan

Imperator · 01-30-2011, 11:18 PM

The level of support us AccessPORT owners have received over the past month is amazing. It's Sunday night and Rob is hard at work still, having already (likely) identified a necessary change for us Steptronic owners using the new map structure.

Thanks again Rob for your near-instantaneous response time and hard work poured into this product! I'm looking forward to spending more time on this revised tune tomorrow.

mithiral67 · 01-30-2011, 11:20 PM

Quote:

Originally Posted by Imperator

The level of support us AccessPORT owners have received over the past month is amazing. It's Sunday night and Rob is hard at work still, having already (likely) identified a necessary change for us Steptronic owners using the new map structure.

Thanks again Rob for your near-instantaneous response time and hard work poured into this product! I'm looking forward to spending more time on this revised tune tomorrow.

I feel like its 30% rob and 70% rob's glorious beard doing the work, but who am I to judge.

Willizm · 01-31-2011, 12:14 AM

Quote:

Originally Posted by mithiral67

I feel like its 30% rob and 70% rob's glorious beard doing the work, but who am I to judge.

Wait, he has a glorious beard? No one told me this?!?! Thats gotta give him more tuner cred around these parts. Yes, i've been neglecting the chicagoland board. i'll make it over there in a bit.

1&done · 01-31-2011, 11:53 AM

Quote:

Originally Posted by Willizm

Quote:

Originally Posted by mithiral67

I feel like its 30% rob and 70% rob's glorious beard doing the work, but who am I to judge.

Wait, he has a glorious beard? No one told me this?!?! Thats gotta give him more tuner cred around these parts. Yes, i've been neglecting the chicagoland board. i'll make it over there in a bit.

Yes, it's very nice! I want to be friends w/ it...

Rob@Cobb · 01-31-2011, 04:19 PM

Quote:

Originally Posted by 1&done

Yes, it's very nice! I want to be friends w/ it...

Haha, I wish I could grow a beard like you guys saw. That was Christian's glory.

Cheers,
Rob

Clap135 · 01-31-2011, 06:23 PM

Rob is actually yet to hit puberty, he shaves once a month if you must know.

I predict by the time stage 2 is out, he might have a peach fuzz lol

Black Gold · 01-31-2011, 06:29 PM

I have an 09 335 6mt with the original software on the car (no update/flash from bmw) with the accessport

What differences should I expect from 1.01 to version 2.00?

Imperator · 01-31-2011, 08:50 PM

Willizm,

The fix that Rob made for our automatics seems to work just fine. I took some time this afternoon to reload the tune using the latest beta firmware along with Rob's revised map. The car now builds boost under part throttle and responds just as it did with the 1.1 map.

Rob@Cobb · 01-31-2011, 10:08 PM

Quote:

Originally Posted by Clap135

Rob is actually yet to hit puberty, he shaves once a month if you must know.

I predict by the time stage 2 is out, he might have a peach fuzz lol

Lol, stage 2 better be out before peach fuzz.

Quote:

I have an 09 335 6mt with the original software on the car (no update/flash from bmw) with the accessport

What differences should I expect from 1.01 to version 2.00?

For the MT cars, nothing really. I will be releasing the functionality to clear codes in all modules in the car in the next week or so.

Cheers,
Rob

Willizm · 02-01-2011, 12:14 AM

Quote:

Originally Posted by Imperator

Willizm,

The fix that Rob made for our automatics seems to work just fine. I took some time this afternoon to reload the tune using the latest beta firmware along with Rob's revised map. The car now builds boost under part throttle and responds just as it did with the 1.1 map.

Bad ass. I've got that map loaded on my AP and as soon as I land and get to my car at O'hare I'm going to install the AP again. Got a nice ride home to test it out

Derek B · 02-01-2011, 12:29 AM

Well you will be happy. I installed the new stg1 93 DIJEOS map and all I can say is holy shheepp this car pulls now. I think its better than before on the IGDOS map. Remember I just had my fuel pump replaced and fuel sensor plus a reprograming. The old 93 map that was released Friday or Sat made me depressed I wanted to go back to BMW and get the old IGDOS so I could have Robs old 93 map he sent me. But I have changed my mind now with the new revision he sent me. You will like it too. My car is AUTO also.

tomob63 · 06-24-2011, 06:00 PM

Quote:

Originally Posted by Imperator

Incomplete coding DTC (p2fa3) and limited PE on the 93 octane map. I want to think it has to do with the consolidated maps and not just my car but wondering if anyone else has encountered issues with the new firmware.

I sent a couple small logs to Rob and he's already on it so I hope it's just isolated to my re-install.

I just installed Stg1 93 IJEOS v201 on my car and now have the same code after updating the firmware on the AP to 1.6.3.2-2159

Any resolution to this code? I'll email support also.

COBB Tuning · 06-24-2011, 07:47 PM

Quote:

Originally Posted by tomob63

I just installed Stg1 93 IJEOS v201 on my car and now have the same code after updating the firmware on the AP to 1.6.3.2-2159

Any resolution to this code? I'll email support also.

I just posted in the other thread, but it can't hurt to update this one also. P2FA3 is a normal background code on an AccessPORT install. It is just a background code that does not effect performance and is nothing to worry about. We will hopefully get rid of this code in future firmware updates.

Ian

tomob63 · 06-24-2011, 07:48 PM

Quote:

Originally Posted by COBB Tuning

I just posted in the other thread, but it can't hurt to update this one also. P2FA3 is a normal background code on an AccessPORT install. It is just a background code that does not effect performance and is nothing to worry about. We will hopefully get rid of this code in future firmware updates.

Ian

much appreciated

Alpina_B3_Lux · 06-25-2011, 04:03 PM

Quote:

Originally Posted by Rob@Cobb

Lol, stage 2 better be out before peach fuzz.

Stage 2 and then stage 3 for upgraded turbos. That's when I would start to become interested.

Alpina_B3_Lux

01-30-2011, 10:02 PM	#89
Rob@Cobb Lieutenant 41 Rep 468 Posts Drives: 2011 E92 335i ///M Pack Join Date: Dec 2010 Location: Austin, TX iTrader: (0)	Willizm and Imperator, Would I be able to get you both to uninstall, then revert back to the release firmware, and reinstall? Please let me know if your vehicles behave differently on the release firmware. I would love to track down why you are having issues as soon as we possibly can. Before the beta release I tested on three manuals and two steptronic cars without issue. This is a bit of surprise. Thank you and I apologize of any inconvenience. Rob
	Appreciate 0 Quote

01-30-2011, 10:15 PM	#91
Willizm Captain 26 Rep 610 Posts Drives: 2009 335Xi and 01 Trans Am WS6 Join Date: Oct 2009 Location: Joliet, Il iTrader: (0)	Btw, Rob does that data log I posted have any use to you guys? I was in a mad dash trying to document and test my findings because I had to fly out to vegas and had to leave the car behind. I figure it would help to get it resolved sooner for the next guy I suppose. __________________ 335i - stock for now Escalade - Urban Assault Vehicle T/A - Forged ls1, PT8285 turbo, heads, cam, 4l80e w/Transbrake, s60 rear on e85.
	Appreciate 0 Quote

01-30-2011, 10:58 PM	#94
mithiral67 That guy 120 Rep 5,740 Posts Drives: 2015 Cayman GTS Join Date: Jun 2008 Location: Chicago Burbs iTrader: (4) Garage List 2015 Porsche Cayman ... [0.00]	Hey a joliet fella. You need to find ur way to the chicagoland thread. __________________ 2015 - Cayman GTS - Stock 2011 - 335is e92 - Cobb PTF E40/Rob - Beck/AR/Helix (458 rwtq and 479 rwhp) - Retired 2007 - 911 Turbo - EP1/AMS (617 awtq and 500 awhp) - Retired 2008 - 335i e92 - Cobb/AR/Helix/OSS (384 rwtq and 356 rwhp) - Retired
	Appreciate 0 Quote

01-30-2011, 11:18 PM	#96
Imperator Major 57 Rep 1,175 Posts Drives: 2010 E92 335i Join Date: Mar 2010 Location: Plano, Texas iTrader: (8)	The level of support us AccessPORT owners have received over the past month is amazing. It's Sunday night and Rob is hard at work still, having already (likely) identified a necessary change for us Steptronic owners using the new map structure. Thanks again Rob for your near-instantaneous response time and hard work poured into this product! I'm looking forward to spending more time on this revised tune tomorrow.
	Appreciate 0 Quote

01-31-2011, 06:23 PM	#101
Clap135 Brigadier General 112 Rep 3,460 Posts Drives: 2009 N54 Join Date: Jul 2009 Location: Sticky's Mom House iTrader: (1)	Rob is actually yet to hit puberty, he shaves once a month if you must know. I predict by the time stage 2 is out, he might have a peach fuzz lol
	Appreciate 0 Quote

01-31-2011, 06:29 PM	#102
Black Gold Major General 609 Rep 5,395 Posts Drives: M3 Join Date: Oct 2010 Location: Texas iTrader: (15)	I have an 09 335 6mt with the original software on the car (no update/flash from bmw) with the accessport What differences should I expect from 1.01 to version 2.00?
	Appreciate 0 Quote

01-31-2011, 08:50 PM	#103
Imperator Major 57 Rep 1,175 Posts Drives: 2010 E92 335i Join Date: Mar 2010 Location: Plano, Texas iTrader: (8)	Willizm, The fix that Rob made for our automatics seems to work just fine. I took some time this afternoon to reload the tune using the latest beta firmware along with Rob's revised map. The car now builds boost under part throttle and responds just as it did with the 1.1 map.
	Appreciate 0 Quote

02-01-2011, 12:29 AM	#106
Derek B Enlisted Member 6 Rep 44 Posts Drives: Black 335I Join Date: Mar 2010 Location: Florida iTrader: (0)	Well you will be happy. I installed the new stg1 93 DIJEOS map and all I can say is holy shheepp this car pulls now. I think its better than before on the IGDOS map. Remember I just had my fuel pump replaced and fuel sensor plus a reprograming. The old 93 map that was released Friday or Sat made me depressed I wanted to go back to BMW and get the old IGDOS so I could have Robs old 93 map he sent me. But I have changed my mind now with the new revision he sent me. You will like it too. My car is AUTO also.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search