[SGM335]

Originally Posted by goldsteina9

why not

Nice! What wheels are those?

[goldsteina9]

Originally Posted by SGM335

Nice! What wheels are those?

the first set of 3 piece 19in mtechnica aero's ever produced by memoryfab

[SGM335]

Originally Posted by goldsteina9

the first set of 3 piece 19in mtechnica aero's ever produced by memoryfab

Man the looks soo good!! Great choice!!

[itsgoco]

Hi

[pillbox]

Originally Posted by itsgoco

Hi

Hey

[EDM92]

Can anyone tell me why I can get 3+ degrees of camber on my front passenger side but I can only get 2.5 on my front driver side? I NEED MOAR TO FIT THESE DAMN WHEELS!

[mikesk]

Originally Posted by itsgoco

Hi

[MonacoBlueE90]

Originally Posted by EDM92

Can anyone tell me why I can get 3+ degrees of camber on my front passenger side but I can only get 2.5 on my front driver side? I NEED MOAR TO FIT THESE DAMN WHEELS!

Don't really know the reason, but i have the same thing at rear except it's other way around. My rear left camber is -3.18 and rear right is -2.57 and both are maxed out.

[EDM92]

Originally Posted by MonacoBlueE90

Don't really know the reason, but i have the same thing at rear except it's other way around. My rear left camber is -3.18 and rear right is -2.57 and both are maxed out.

It's quite annoying eh! I jacked it up and looked at all the components, everything looks fine... I need a solution to my problem ASAP but I can't think of anything.

[MonacoBlueE90]

Originally Posted by EDM92

It's quite annoying eh! I jacked it up and looked at all the components, everything looks fine... I need a solution to my problem ASAP but I can't think of anything.

I think it has something to do with the height of the car, maybe it's not totally even like lower on the other side than other. Or maybe that's the tolerance you have deal with. You probably can't do anything to it. I didn't do anything to it.

[#Tee]

Originally Posted by EDM92

Can anyone tell me why I can get 3+ degrees of camber on my front passenger side but I can only get 2.5 on my front driver side? I NEED MOAR TO FIT THESE DAMN WHEELS!

post pix of driver and passenger tower

[EDM92]

Originally Posted by #Tee

post pix of driver and passenger tower

Both sides are at 2.5 degrees right now. As you can see the driver's side is already maxxed out, top of the coil is as far over as it can go on the plate. The passenger's side still has more room to go.

Driver's side:


Driver's side:


Passenger's side:


Passenger's side:

[Mad K]

some coilovers are side specific, may have them on the incorrect side. other than that, im not sure atm

[#Tee]

what coils are you on again? on the driver side see if you can flip the adjustment plate 180 degrees.

[Marcadelic]

Originally Posted by #Tee

what coils are you on again? on the driver side see if you can flip the adjustment plate 180 degrees.

he's on either broadway or fortune auto I always forget lol

[EDM92]

Originally Posted by Madk180sx

some coilovers are side specific, may have them on the incorrect side. other than that, im not sure atm

Originally Posted by #Tee

what coils are you on again? on the driver side see if you can flip the adjustment plate 180 degrees.

Originally Posted by Marcadelic

he's on either broadway or fortune auto I always forget lol

Yeah I'm on Broadway Static coilovers. I will try flipping the plate, problem is I won't know if I gained any more camber until I get an alignment. Personally I can't tell the difference between half a degree with my eye.

[BeeMuh]

Front:
235/35/19 Hankook V12
19x9.5 Varrstoen ES5 Offset 20

Rear:
265/30/19 Hankook V12
19x10.5 Offset 22

ST Coilovers with fender rolling

Minor rubbing in tight spots

[Mad K]

I'm on Fortune Auto's. Should be the same. If I remember right, my alignment pegged me a little over neg 3 degrees in the front. When i first installed the coils, i didn't have them on the right side but quickly figured it out when i couldn't fit my wheels.

Damn trash in my grill

[EDM92]

Originally Posted by Madk180sx

I'm on Fortune Auto's. Should be the same. If I remember right, my alignment pegged me a little over neg 3 degrees in the front. When i first installed the coils, i didn't have them on the right side but quickly figured it out when i couldn't fit my wheels.

Yeah pretty sure Broadways and Fortunes are the same. Are they side specific? They don't seem to be... How can I tell if they're on the wrong side?

I test fit a 18x10 +19 and it fit by a few mm.

[P Casey]

Originally Posted by Madk180sx

I'm on Fortune Auto's. Should be the same. If I remember right, my alignment pegged me a little over neg 3 degrees in the front. When i first installed the coils, i didn't have them on the right side but quickly figured it out when i couldn't fit my wheels.

Damn trash in my grill

Nice

[VIBE Motorsports]

Originally Posted by E90Fatlace

Throwback. Old setup
18x9.5 18x11.5

Nice

[Mad K]

Originally Posted by EDM92

Yeah pretty sure Broadways and Fortunes are the same. Are they side specific? They don't seem to be... How can I tell if they're on the wrong side?

I test fit a 18x10 +19 and it fit by a few mm.

Knew mine were on the wrong side when the lower bracket for the front roll bar didn't line up correctly. Have you asked BWS about your problem?

Tire size?

I'm running 19x9.5 +5 up front so my setup is very aggressive. 215/35 was needed in order to make them fit. I'm pretty low up front and can barely stick my credit card up front. Don't rub at all either.

Originally Posted by P Casey

Nice

Thanks