BMW CODING success

b1gmac88 · 02-01-2011, 03:28 PM

Quote:

Originally Posted by xxxjecxxx

restoring the orignal fine will not fix it. I'm still looking for what option I have to change in VO.. upload your VO i'll see If I can help you with it also.

Sure. Im sorry to ask but how do i do that.. Im on hour 3 of coding

mineo77 · 02-01-2011, 03:42 PM

Quote:

Originally Posted by b1gmac88

How would I get back to the original settings?? I saved my original FSW PSW.MAN file

I got the dig speedo to work but not the door dong and now i have this exclamation mark with a circle around it (looks like a gear with a !) in the middle. Im getting scared that I messed something up

Does it look like this? If so, now you drive an automatic tranny, likely Right Hand Drive and spec'd to euro!

b1gmac88 · 02-01-2011, 03:45 PM

Quote:

Originally Posted by mineo77

Does it look like this? If so, now you drive an automatic tranny, likely Right Hand Drive and spec'd to euro!

yup thats it.. wonderful, i get it to work and first 2 codes mess up my car..

mineo77 · 02-01-2011, 03:51 PM

Quote:

Originally Posted by b1gmac88

yup thats it.. wonderful, i get it to work and first 2 codes mess up my car..

I think the ladies are more keen on euro men, so you have that going for you..not sure about the right hand drive...maybe you can use your car for the postal service i guess!

b1gmac88 · 02-01-2011, 03:55 PM

Quote:

Originally Posted by mineo77

I think the ladies are more keen on euro men, so you have that going for you..not sure about the right hand drive...maybe you can use your car for the postal service i guess!

are there any problems other than the light?

mineo77 · 02-01-2011, 03:57 PM

Quote:

Originally Posted by b1gmac88

are there any problems other than the light?

not that I am aware of...since you are not really auto tranny. only potential problem with being euro spec'd is fuel ratings are different.

xxxjecxxx · 02-01-2011, 07:26 PM

Quote:

Originally Posted by b1gmac88

Sure. Im sorry to ask but how do i do that.. Im on hour 3 of coding

The VO (Vehicle Order) has all the options your car originally came with. If i'm not mistaken you can copy and paste it.

it is under your VIN. watch the video I show where it is there.

xxxjecxxx · 02-01-2011, 07:26 PM

Quote:

Originally Posted by mineo77

not that I am aware of...since you are not really auto tranny. only potential problem with being euro spec'd is fuel ratings are different.

no problems, just annoying warning light.

xxxjecxxx · 02-01-2011, 07:28 PM

Can someone with a manual car upload their TRC for CAS so we can compare it and see if anything else changes in that module or if it's changed something in another module.

Wissam · 02-01-2011, 09:44 PM

Seems like the gear with an ! in the middle of it is in season these days...this thread is over 50 pages and not one mention of this error, and now in the last couple of days few people have reported it...so now I guess is my turn...some background first, I don't have an NFRM sub-module and I want to disable the DRL, so I tried to do it directly in the main CAS module:

As a trial for coding the main CAS itself, I decided to try to restore the main CAS module to OEM condition using the .TRC file created before any coding, i.e the one I backed up the very first time I used NCSExpert. I copied the file over to the NCSExpert Work directory and made another copy of it and called it .MAN. After I read the main CAS as per ususal, it created an FSW_PSW.TRC, let's call it FILE1. Then instead of clicking "Process ECU", I clicked "Process car" (F3), and then "Code Car" (F1). It started going through the coding and got to sub-module 6BMOT and failed, and I got the infamous yellow gear with an ! in the middle of it. So I figured I'm screwed already, might as well try something else to fixt it...so I tried to repeat coding the main CAS but this time using the last good .TRC file, which would be FILE1 above, so I copied that file over to Work directory and created a copy of it and called it .MAN. I tried the same coding procedure as above, and it failed the same as above and at the same stage, but this time the gear error has disappeared.

Don't know if I just got lucky or if there is some sort of a logic that you must always use the last .TRC it spits out for that module or sub-module and modify it, as opposed to using an older .TRC that perhaps has somehow become obsolete...I think at some point I did compare the .TRC files created on different dates for the same modules and without any coding in between, and some of the parameters in the two files were different!

P.S. I just noticed that for some reason I can not explain, my DRL light (high beam) is ON full strength now as opposed to dimmed per normal!

2kaccordocoupe · 02-01-2011, 10:02 PM

Quote:

Originally Posted by xxxjecxxx

Can someone with a manual car upload their TRC for CAS so we can compare it and see if anything else changes in that module or if it's changed something in another module.

Here is my cas.trc file.

xxxjecxxx · 02-01-2011, 10:29 PM

Quote:

Originally Posted by 2kaccordocoupe

Here is my cas.trc file.

thank you.

Wissam can you upload your current TRC for CAS so we can compare it with the one posted above. Thanks.

This will be one more thing to add to the DIY when we figure it out. guess everyone and their mother with a manual tranny decided to code their cars now

2kaccordocoupe · 02-01-2011, 10:41 PM

So all the connectivity errors I had before was due to cable with the clear / silver cable. Which was weird because it could connect to an e46 and e53 just fine... Anyway I ended up getting the same black cable that everyone else got and sure enough it worked on my car no problem.

All the usual stuff like corner delete, digital speed etc... worked.

CIC - NAVI_FUELSTOP_PROPOSAL - Worked. I updated the doc on google to reflect it.
CIC - NAVI_MAPMODE_AUTOMATIC - Day/Night/Auto Menu showed up however setting it to auto did nothing. Lights on or off, in auto mode did nothing. Map always stayed in Day mode.

Thanks for the help everyone, I'm going to start tinkering to give back to this thread

ebmiller88 · 02-01-2011, 11:33 PM

Quote:

Originally Posted by mineo77

getting error when reading:

group file: D_SIM.
SYS-0012: IDENTIFICATION ERROR
Program will be stopped

any ideas?

Did you get this error fixed? I got the same one when using INPALOAD for the first time. I'm using an XP setup and everything has gone as expected with one exception. I did not have an option to set FIFO buffers in COM1. I lowered the latency to 1 as directed in the COM1 settings but changed nothing else. Have any input? Thanks.

Ed

xxxjecxxx · 02-01-2011, 11:41 PM

Quote:

Originally Posted by ebmiller88

Did you get this error fixed? I got the same one when using INPALOAD for the first time. I'm using an XP setup and everything has gone as expected with one exception. I did not have an option to set FIFO buffers in COM1. I lowered the latency to 1 as directed in the COM1 settings but changed nothing else. Have any input? Thanks.

Ed

If you are using the ebay cable i think was around $130 you don't need to set anything else. If you need help let me know, I can help you with install.

mineo77 · 02-01-2011, 11:52 PM

Quote:

Originally Posted by xxxjecxxx

thank you.

Wissam can you upload your current TRC for CAS so we can compare it with the one posted above. Thanks.

This will be one more thing to add to the DIY when we figure it out. guess everyone and their mother with a manual tranny decided to code their cars now

you got any ideas???

onebadmofo · 02-02-2011, 06:44 AM

Guys, if you need file hosting let me know, I can host it off my FIOS connection.

badluckm3 · 02-02-2011, 07:46 AM

Quote:

Originally Posted by xxxjecxxx

This will be one more thing to add to the DIY when we figure it out. guess everyone and their mother with a manual tranny decided to code their cars now

For those of us that may have an auto 135i, is this same dash light coming on? Or just affecting manuals?

Amlethae · 02-02-2011, 08:52 AM

2011 335xi 6MT e90

CAS trace.

xxxjecxxx · 02-02-2011, 09:22 AM

Quote:

Originally Posted by badluckm3

For those of us that may have an auto 135i, is this same dash light coming on? Or just affecting manuals?

everyone with the error has a manual.

Amlethae are you having the error also?

We need a TRC from CAS of a car that has already been coded and has the error so we can compare.

Toshi · 02-02-2011, 09:33 AM

Quote:

Originally Posted by spazticrecords

Updated DATEN files for CIC module for 2009 + cars. I uploaded another archive a while back, but some reported that other modules couldn't be read/write when replaced all files so I just found the CIC files instead of everything. These are just the files for the CIC. Replace with respective directories inside the achieve. There are 2 directories.

C:\NCSEXPERT\DATEN\E89
C:\EDIBIAS\ECU

Once replaced I was able to read and write all previous working modules + CIC. Please let me know if you have any questions and this works.

http://hotfile.com/dl/97282608/d8023...dated.rar.html

Pass: e90post

Please somebody upload this again.

Quote:

Originally Posted by AoshichanX

Update your Daten Files. They're available on Usenet if you have that service or here.

\NCSEXPER_\NCSEXPER\DATEN

Step-by-Step Guide Here.

More than 70 files... it's too big

b1gmac88 · 02-02-2011, 10:37 AM

As Wissam noted above, the problem started for me when I did "Process Car" and then "Code car".

I am going to try to do the same steps he did to get rid of this stupid yellow error that keeps coming up on my screen and wont go away.

02-01-2011, 07:28 PM	#1241
xxxjecxxx Banned 245 Rep 966 Posts Drives: F30 335i M sport Join Date: Aug 2009 Location: Orlando, FL iTrader: (1) Garage List 2013 BMW 335i [0.00] 2006 BMW 325i [0.00]	Can someone with a manual car upload their TRC for CAS so we can compare it and see if anything else changes in that module or if it's changed something in another module.
	Appreciate 0 Quote

02-01-2011, 09:44 PM	#1242
Wissam Private First Class 20 Rep 141 Posts Drives: 2007 e90 328I Join Date: Dec 2006 Location: GTA, Canada iTrader: (3)	Seems like the gear with an ! in the middle of it is in season these days...this thread is over 50 pages and not one mention of this error, and now in the last couple of days few people have reported it...so now I guess is my turn...some background first, I don't have an NFRM sub-module and I want to disable the DRL, so I tried to do it directly in the main CAS module: As a trial for coding the main CAS itself, I decided to try to restore the main CAS module to OEM condition using the .TRC file created before any coding, i.e the one I backed up the very first time I used NCSExpert. I copied the file over to the NCSExpert Work directory and made another copy of it and called it .MAN. After I read the main CAS as per ususal, it created an FSW_PSW.TRC, let's call it FILE1. Then instead of clicking "Process ECU", I clicked "Process car" (F3), and then "Code Car" (F1). It started going through the coding and got to sub-module 6BMOT and failed, and I got the infamous yellow gear with an ! in the middle of it. So I figured I'm screwed already, might as well try something else to fixt it...so I tried to repeat coding the main CAS but this time using the last good .TRC file, which would be FILE1 above, so I copied that file over to Work directory and created a copy of it and called it .MAN. I tried the same coding procedure as above, and it failed the same as above and at the same stage, but this time the gear error has disappeared. Don't know if I just got lucky or if there is some sort of a logic that you must always use the last .TRC it spits out for that module or sub-module and modify it, as opposed to using an older .TRC that perhaps has somehow become obsolete...I think at some point I did compare the .TRC files created on different dates for the same modules and without any coding in between, and some of the parameters in the two files were different! P.S. I just noticed that for some reason I can not explain, my DRL light (high beam) is ON full strength now as opposed to dimmed per normal! Last edited by Wissam; 02-02-2011 at 09:09 PM.. Reason: Clarification: replaced "and got the same error message" with "and it failed the same"
	Appreciate 0 Quote

02-01-2011, 10:41 PM	#1245
2kaccordocoupe Brigadier General 1286 Rep 4,703 Posts Drives: Former ///M Driver Join Date: Nov 2008 Location: The 6ix iTrader: (2)	So all the connectivity errors I had before was due to cable with the clear / silver cable. Which was weird because it could connect to an e46 and e53 just fine... Anyway I ended up getting the same black cable that everyone else got and sure enough it worked on my car no problem. All the usual stuff like corner delete, digital speed etc... worked. CIC - NAVI_FUELSTOP_PROPOSAL - Worked. I updated the doc on google to reflect it. CIC - NAVI_MAPMODE_AUTOMATIC - Day/Night/Auto Menu showed up however setting it to auto did nothing. Lights on or off, in auto mode did nothing. Map always stayed in Day mode. Thanks for the help everyone, I'm going to start tinkering to give back to this thread Last edited by 2kaccordocoupe; 02-01-2011 at 10:47 PM..
	Appreciate 0 Quote

02-02-2011, 06:44 AM	#1249
onebadmofo Colonel 353 Rep 2,394 Posts Drives: 2008 E90 M3 Join Date: Aug 2010 Location: Central NJ iTrader: (14)	Guys, if you need file hosting let me know, I can host it off my FIOS connection.
	Appreciate 0 Quote

02-02-2011, 10:37 AM	#1254
b1gmac88 Captain 91 Rep 953 Posts Drives: 335i e92 Join Date: Jan 2008 Location: E Coast iTrader: (16)	As Wissam noted above, the problem started for me when I did "Process Car" and then "Code car". I am going to try to do the same steps he did to get rid of this stupid yellow error that keeps coming up on my screen and wont go away.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search