OFFICIAL THREAD: Forgestar F14 Super Deep Concave

Underground6t9 · 05-17-2017, 03:23 PM

Quote:

Originally Posted by Izzy559

Finally took some half decent photos. What do you guys think? Had to roll my fenders and a flare.

Looks super clean

xhoul335i · 05-17-2017, 06:34 PM

I have a 2011 335i E90 LCI and I'm wanting to pull the trigger on a set of F14's but i'm still not 100% on the fitment. I want a flush/stretched look, also can I run SDC on both front and rears without adjusting the camber?

My fenders are rolled.
F: 19x8.5 ET30
R: 19x9.5 ET33
F: 225/35/19
R: 255/30/19

Rob09msport · 05-17-2017, 08:05 PM

Quote:

Originally Posted by xhoul335i

I have a 2011 335i E90 LCI and I'm wanting to pull the trigger on a set of F14's but i'm still not 100% on the fitment. I want a flush/stretched look, also can I run SDC on both front and rears without adjusting the camber?

My fenders are rolled.
F: 19x8.5 ET30
R: 19x9.5 ET33
F: 225/35/19
R: 255/30/19

8.5 doesn't come sdc I had to have my rears re rolled stock msport height I plan on doing perches to drop half inch in front I did 19 by 9.5 front et22 wish I went 23 as that the max and 19 by 10 back et 28 back is perfect flush however the front if I add very slight camber will be flush but the drop will add some on its own so I think will be perfect and I running 235 265 tires honestly and 11 inch rear will have more stretch and provably more clearance with same et because of the steeper angle on the rubber as it barely touched at middle of rubber but then your rim will poke more so I would stick to the 10 inch rear rim the tightest spot is where the bumper meets rear quarter sorry for run on sentence if I hurt anyone's brain when I do voice to text some people get bitchy I noticed LMAO

https://goo.gl/photos/NtB8yx8fTTCpzxGDA

samnyc86 · 05-19-2017, 01:23 AM

just ordered a set...looking forward to putting them on!

07tundra · 05-29-2017, 11:21 AM

Almost everyone has gone with a 19x11 et22-27? Has anyone seen how much room is left in the inside of the fender or how close they come to components like strut or anything else with those offsets?

PK_AUTODESIGN · 05-30-2017, 06:53 PM

I have a set of brand new F14 sdc all around in 19x10 and 19x11 semi black in stock!!

Jesse J

m3whip · 05-30-2017, 11:40 PM

Quote:

Originally Posted by PK_AUTODESIGN

I have a set of brand new F14 sdc all around in 19x10 and 19x11 semi black in stock!!

Jesse J

What offset?

07tundra · 05-31-2017, 12:50 AM

Quote:

Originally Posted by PK_AUTODESIGN

I have a set of brand new F14 sdc all around in 19x10 and 19x11 semi black in stock!!

Jesse J

Quote:

Originally Posted by m3whip

What offset?

exactly this and price?

jcarv20s · 05-31-2017, 11:16 AM

Has anyone gone SDC at all 4 corners on an XI?

PK_AUTODESIGN · 06-01-2017, 12:26 AM

Quote:

Originally Posted by 07tundra

exactly this and price?

19x10 20 offset up front and 19x11 35 offset in the rear

Jesse J

07tundra · 06-01-2017, 01:43 AM

Quote:

Originally Posted by PK_AUTODESIGN

19x10 20 offset up front and 19x11 35 offset in the rear

Jesse J

Price?

ritchwell · 06-01-2017, 11:57 AM

19x9.5 et21 front 235/35/19
19x10 et27 rear 265/30/19
powdercoated gloss gunmetal
rolled rear and slight pull fender and a little over -2.0 cambers on the rear

ritchwell · 06-01-2017, 11:58 AM

Quote:

Originally Posted by jcarv20s

Has anyone gone SDC at all 4 corners on an XI?

my post above is a 2011 xdrive

m3whip · 06-01-2017, 11:13 PM

Quote:

Originally Posted by ritchwell

19x9.5 et21 front 235/35/19
19x10 et27 rear 265/30/19
powdercoated gloss gunmetal
rolled rear and slight pull fender and a little over -2.0 cambers on the rear

Wow! Your car looks sick!

ritchwell · 06-01-2017, 11:29 PM

Quote:

Originally Posted by m3whip

Quote:

Originally Posted by ritchwell

19x9.5 et21 front 235/35/19
19x10 et27 rear 265/30/19
powdercoated gloss gunmetal
rolled rear and slight pull fender and a little over -2.0 cambers on the rear

Wow! Your car looks sick!

Quote:

Originally Posted by m3whip

Quote:

Originally Posted by ritchwell

19x9.5 et21 front 235/35/19
19x10 et27 rear 265/30/19
powdercoated gloss gunmetal
rolled rear and slight pull fender and a little over -2.0 cambers on the rear

Wow! Your car looks sick!

Thanks dude, I'm really happy with these wheels. Pat from sonic tuning was on point on his recommendation of the custom spec so I would not rub

mashimarho · 06-10-2017, 12:47 AM

Anyone wanting a new set of Forgestar F14 SDC
19x9.5 +22 19x11 +25? I have a buddy with a couple sets in box.

Marcadelic · 06-13-2017, 10:35 AM

Quote:

Originally Posted by mashimarho

Anyone wanting a new set of Forgestar F14 SDC
19x9.5 +22 19x11 +25? I have a buddy with a couple sets in box.

I may be interested! Shoot me a PM with the color options and price

07tundra · 06-14-2017, 02:08 AM

I see most have negative camber what is oem camber on these 335s? and to achieve full contact patch rather than half a tire what is a good camber to try to achieve

325d09 · 07-02-2017, 06:28 PM

Hello I am after forgestar f14 19" alloys. In deep concave front poss deep or super deep concave on rear.
Posting to cheshire Uk.
Thanks

mantis · 07-04-2017, 05:44 AM

want to try and fit

19x9.5 squared on 2011 E90 lci with rolled and pulled fenders front and rear

Underground6t9 · 07-10-2017, 04:13 PM

What offsets are people running on xdrive for E92?

stanko89 · 12-10-2017, 05:31 PM

hi guys,

does anyone drive the f14 sdc on an e90/e91 lci?

05-17-2017, 06:34 PM	#112
xhoul335i Private 24 Rep 83 Posts Drives: 11' e90 335i Join Date: Apr 2017 Location: Phoenix, AZ iTrader: (0)	I have a 2011 335i E90 LCI and I'm wanting to pull the trigger on a set of F14's but i'm still not 100% on the fitment. I want a flush/stretched look, also can I run SDC on both front and rears without adjusting the camber? My fenders are rolled. F: 19x8.5 ET30 R: 19x9.5 ET33 F: 225/35/19 R: 255/30/19
	Appreciate 0 Quote

05-19-2017, 01:23 AM	#114
samnyc86 New Member 4 Rep 8 Posts Drives: 2011 BMW 328i Join Date: Jul 2014 Location: Seattle, WA iTrader: (0)	just ordered a set...looking forward to putting them on!
	Appreciate 1 m3whip353.00 Quote

05-29-2017, 11:21 AM	#115
07tundra Lieutenant Colonel 122 Rep 1,524 Posts Drives: 8.1L Chevy 2500hd Join Date: Jan 2012 Location: New Mexico iTrader: (9)	Almost everyone has gone with a 19x11 et22-27? Has anyone seen how much room is left in the inside of the fender or how close they come to components like strut or anything else with those offsets? __________________ 2008 335i FFTEC ST 6266,), Boostbox, VRSF 3.5 exhaust, mtech front and rear, KWVll, APEX 18x9.0, 18x12= 305/35/18 NTO1s, BMS OCC, Rb PVC, M3 tri-color stitched S-wheel,MT SWAPPED, M3 LSD diff 2008 135i mods coming soon!
	Appreciate 1 m3whip353.00 Quote

05-30-2017, 06:53 PM	#116
PK_AUTODESIGN 94 Rep 1,741 Posts Drives: F12 M6 Join Date: Jan 2017 Location: LOS ANGELES iTrader: (1) Garage List 2012 BMW E92 M3 [0.00]	I have a set of brand new F14 sdc all around in 19x10 and 19x11 semi black in stock!! Jesse J
	Appreciate 1 m3whip353.00 Quote

05-31-2017, 11:16 AM	#119
jcarv20s Second Lieutenant 19 Rep 210 Posts Drives: 2014 435i Join Date: Apr 2012 Location: Danbury, CT iTrader: (0)	Has anyone gone SDC at all 4 corners on an XI?
	Appreciate 0 Quote

06-01-2017, 11:57 AM	#122
ritchwell First Lieutenant 64 Rep 341 Posts Drives: 2011 BMW 335i xdrive sedan Join Date: Sep 2013 Location: Central NJ iTrader: (18)	xdrive with sdc 19x9.5 et21 front 235/35/19 19x10 et27 rear 265/30/19 powdercoated gloss gunmetal rolled rear and slight pull fender and a little over -2.0 cambers on the rear Attached Images
	Appreciate 2 m3whip353.00 Izzy5595.50 Quote

06-10-2017, 12:47 AM	#126
mashimarho BimmerPost Supporting Vendor 2159 Rep 13,877 Posts Drives: E92 M3 & F80 M3 & G82 M4 Join Date: Mar 2010 Location: Lynnwood, WA iTrader: (45) Garage List 2021 BMW G82 M4 [0.00] 2011 BMW E92 M3 [0.00] 2015 BMW F80 M3 [0.00] 2012 BMW 335i xDrive [9.78]	Anyone wanting a new set of Forgestar F14 SDC 19x9.5 +22 19x11 +25? I have a buddy with a couple sets in box. __________________ Mashimarho.com /// Instagram /// Facebook /// Youtube /// sales@mashimarho.com /// (425) 582-7939
	Appreciate 1 m3whip353.00 Quote

06-14-2017, 02:08 AM	#128
07tundra Lieutenant Colonel 122 Rep 1,524 Posts Drives: 8.1L Chevy 2500hd Join Date: Jan 2012 Location: New Mexico iTrader: (9)	I see most have negative camber what is oem camber on these 335s? and to achieve full contact patch rather than half a tire what is a good camber to try to achieve __________________ 2008 335i FFTEC ST 6266,), Boostbox, VRSF 3.5 exhaust, mtech front and rear, KWVll, APEX 18x9.0, 18x12= 305/35/18 NTO1s, BMS OCC, Rb PVC, M3 tri-color stitched S-wheel,MT SWAPPED, M3 LSD diff 2008 135i mods coming soon!
	Appreciate 0 Quote

07-02-2017, 06:28 PM	#129
325d09 Enlisted Member 0 Rep 30 Posts Drives: 325d Join Date: Feb 2015 Location: United Kingdom iTrader: (0)	Hello I am after forgestar f14 19" alloys. In deep concave front poss deep or super deep concave on rear. Posting to cheshire Uk. Thanks
	Appreciate 0 Quote

07-04-2017, 05:44 AM	#130
mantis Captain 279 Rep 655 Posts Drives: 2011 328i Join Date: May 2016 Location: socal iTrader: (0) Garage List 2011 e90 [5.50]	want to try and fit 19x9.5 squared on 2011 E90 lci with rolled and pulled fenders front and rear
	Appreciate 0 Quote

07-10-2017, 04:13 PM	#131
Underground6t9 Lieutenant Colonel 317 Rep 1,735 Posts Drives: BMW 335xi, Lexus is250 Join Date: Jan 2014 Location: Eugene, OR iTrader: (2)	What offsets are people running on xdrive for E92? __________________ \|instagram@underground6t9\|
	Appreciate 0 Quote

12-10-2017, 05:31 PM	#132
stanko89 New Member 0 Rep 11 Posts Drives: 330d xdrive Join Date: Oct 2017 Location: switzerland iTrader: (0)	hi guys, does anyone drive the f14 sdc on an e90/e91 lci?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search