CONSTRUCTauto /// AMUSE ERRICSON Trunks for e90 & e92!!!

CONSTRUCTauto.com · 01-28-2010, 06:15 PM

Quote:

Originally Posted by dpavlakos91

I cant wait for mine to come in this week!!!

Is there a DIY on how to remove and install an e92 trunk?

There you go buddy:
http://www.e90post.com/forums/showth...ght=vorsteiner

Quote:

Originally Posted by E92NV

how much is shipping to NY 11552?

You have a PM.

Cyrax91 · 01-28-2010, 07:07 PM

Thanks man

I actually already have it on i just need to finish up with the wiring of everything. Trunk fits great so far and looks awesome! Only issue I had was as the other member stated the license plate cut outs. I had a really hard time getting them in and I still think they're not in all the way, but I think it'll be fine. Same goes for the trunk latch to open it manually. And for me all the holes are missing for the cover, but im gonna get a drill and it should be no problem.

Ill say though you did a great job with shipment and the trunk is sick! A few minor mods and everything is great

Thanks again man id recommend you as a seller to anyone.

LaYzEe · 01-29-2010, 12:00 AM

pm me price shipped to 95015 please.

will i be able to drill two holes for the emblem still?

CONSTRUCTauto.com · 02-01-2010, 03:50 PM

Quote:

Originally Posted by dpavlakos91

Thanks man

I actually already have it on i just need to finish up with the wiring of everything. Trunk fits great so far and looks awesome! Only issue I had was as the other member stated the license plate cut outs. I had a really hard time getting them in and I still think they're not in all the way, but I think it'll be fine. Same goes for the trunk latch to open it manually. And for me all the holes are missing for the cover, but im gonna get a drill and it should be no problem.

Ill say though you did a great job with shipment and the trunk is sick! A few minor mods and everything is great

Thanks again man id recommend you as a seller to anyone.

Thanks for the short review brother

Quote:

Originally Posted by LaYzEe

pm me price shipped to 95015 please.

will i be able to drill two holes for the emblem still?

You got a pm. the best way is just to use some strong 3M double sided tape to secure the emblem without drilling the holes. Its easier to sell the trunk later this way.

BACK2DTM · 02-03-2010, 08:21 PM

thumbs up!

my07_335i · 02-04-2010, 08:36 PM

pictures don't work anymore? don't see anything on main page.

CONSTRUCTauto.com · 02-05-2010, 06:02 PM

No, they are working. We have just re-stocked on some more of those trunks. They are flying odd the shelves pretty quickly.

Cyrax91 · 02-05-2010, 06:39 PM

So I have my trunk completely installed except for one issue? The trunk wont close ha. I think the latch isn't angled right. Im gonna work on it this weekend, but have you had this issue at all and do you know how to fix it? Either way I love the way the trunk looks its perfect and the fitment besides that is excellent!

montreal red · 02-07-2010, 05:57 PM

Quote:

Originally Posted by dpavlakos91

So I have my trunk completely installed except for one issue? The trunk wont close ha. I think the latch isn't angled right. Im gonna work on it this weekend, but have you had this issue at all and do you know how to fix it? Either way I love the way the trunk looks its perfect and the fitment besides that is excellent!

i really want to jump on this before spring. but it sounds like there's quite a bit of fitting work involved... i guess its not wise to attempt the install on my own?

CONSTRUCTauto.com · 02-08-2010, 12:59 AM

There isn't much work involved at all. I have installed one and I didn't have to fit or adjust anything at all. I didn't touch the holes for the license plate bracket either.

The trunk should close fine. Just press on it harder. It won't close as easy as OEM one because it is much lighter. I had the same issue with a VRS trunk for the same reason.

Cyrax91 · 02-08-2010, 02:56 PM

Quote:

Originally Posted by CONSTRUCTauto.com

There isn't much work involved at all. I have installed one and I didn't have to fit or adjust anything at all. I didn't touch the holes for the license plate bracket either.

The trunk should close fine. Just press on it harder. It won't close as easy as OEM one because it is much lighter. I had the same issue with a VRS trunk for the same reason.

Ill give it a shot tonight, but I was slamming pretty hard. Thanks again

montreal red · 02-08-2010, 11:46 PM

btw, did you guys bring in any frp trunks yet ?

CONSTRUCTauto.com · 02-09-2010, 05:35 PM

Quote:

Originally Posted by montreal red

btw, did you guys bring in any frp trunks yet ?

There are no FRP trunks coming. there is no point in making them when carbon trunks are pretty cheap.

montreal red · 02-09-2010, 06:35 PM

Quote:

Originally Posted by CONSTRUCTauto.com

There are no FRP trunks coming. there is no point in making them when carbon trunks are pretty cheap.

k thanks!
i really want to get this, just need to save up my pennies now. will jump on this before spring comes for sure!

CONSTRUCTauto.com · 02-18-2010, 12:41 PM

We have the full amuse kit coming for a e92. That will make quite a combo together with the trunk.

KWY91 · 02-18-2010, 01:16 PM

Please post up some pictures of the full kit, like their individual pics and fitment!

Thanks!

CONSTRUCTauto.com · 02-18-2010, 01:53 PM

Quote:

Originally Posted by dpavlakos91

I cant wait for mine to come in this week!!!

Is there a DIY on how to remove and install an e92 trunk?

Quote:

Originally Posted by E92NV

how much is shipping to NY 11552?

Thats what I got for now:
http://www.constructauto.com/gfx/pro...ont/index.html

There will be a separate post about it. Right now I only have 8 fronts and 2 full kits coming and 3 of the fronts are not pre-sold yet. you'll see plenty about then once they are here.

KWY91 · 02-18-2010, 02:13 PM

Sounds great!

CONSTRUCTauto.com · 02-22-2010, 04:29 PM

Last one sold. Getting some more in stock in 2 days!

CONSTRUCTauto.com · 02-24-2010, 02:59 PM

up

CONSTRUCTauto.com · 02-26-2010, 06:47 PM

back in stock!!!

klipseracer · 02-28-2010, 11:35 AM

Figured I'd show a little bit more.

Here is what the trunk looks like with Mtec rear+CF Diffuser. Keep in mind I'm missing that little trim piece between the bumper and diffuser.

Also, for those of you having trouble closing the trunk, it just needs to be slammed. make sure it lines up right and slam it closed. The trunk is really strong I wouldn't be worried about it as long as you're using reasonable force. After a couple weeks, the trunk doesn't need to be slammed anymore. I think the rubber surround becomes accustomed to the new trunk and it fits perfect.

01-28-2010, 07:07 PM	#112
Cyrax91 YNWA 199 Rep 1,814 Posts Drives: Imola Red F80 M3 Join Date: Oct 2008 Location: NM iTrader: (18)	Thanks man I actually already have it on i just need to finish up with the wiring of everything. Trunk fits great so far and looks awesome! Only issue I had was as the other member stated the license plate cut outs. I had a really hard time getting them in and I still think they're not in all the way, but I think it'll be fine. Same goes for the trunk latch to open it manually. And for me all the holes are missing for the cover, but im gonna get a drill and it should be no problem. Ill say though you did a great job with shipment and the trunk is sick! A few minor mods and everything is great Thanks again man id recommend you as a seller to anyone. __________________ Imola Red ZCP F80 M3
	Appreciate 0

01-29-2010, 12:00 AM	#113
LaYzEe Major 114 Rep 1,040 Posts Drives: AW E92 335i Join Date: Sep 2007 Location: Bay Area, Ca iTrader: (4)	pm me price shipped to 95015 please. will i be able to drill two holes for the emblem still? __________________
	Appreciate 0

02-03-2010, 08:21 PM	#115
BACK2DTM Enlisted Member 0 Rep 33 Posts Drives: PCAR Join Date: Jan 2008 Location: Lakers Land iTrader: (0)	thumbs up! __________________
	Appreciate 0

02-04-2010, 08:36 PM	#116
my07_335i Second Lieutenant 26 Rep 254 Posts Drives: 2007 E90 SMG 335i Join Date: Feb 2010 Location: Santa Clara, CA iTrader: (1) Garage List 2007 335i [0.00]	pictures don't work anymore? don't see anything on main page. __________________ '07 SGM + DG 335i sedan\|Navi\|ZPP\|Rear PDC\|Euphoria 6k LED interior\|Matte Black Grills\|OEM Blacklines\|MTEC A.E's\|CF Roundels\|Alufelgen 19" CS7 with 15/12mm spacers If I buy something from you please leave me feedback My Portfolio
	Appreciate 0

02-05-2010, 06:02 PM	#117
CONSTRUCTauto.com Major 90 Rep 1,436 Posts Drives: e90 335i - Retired, e36 M3 Join Date: Mar 2009 Location: San Diego iTrader: (13)	No, they are working. We have just re-stocked on some more of those trunks. They are flying odd the shelves pretty quickly.
	Appreciate 0

02-05-2010, 06:39 PM	#118
Cyrax91 YNWA 199 Rep 1,814 Posts Drives: Imola Red F80 M3 Join Date: Oct 2008 Location: NM iTrader: (18)	So I have my trunk completely installed except for one issue? The trunk wont close ha. I think the latch isn't angled right. Im gonna work on it this weekend, but have you had this issue at all and do you know how to fix it? Either way I love the way the trunk looks its perfect and the fitment besides that is excellent! __________________ Imola Red ZCP F80 M3
	Appreciate 0

02-08-2010, 12:59 AM	#120
CONSTRUCTauto.com Major 90 Rep 1,436 Posts Drives: e90 335i - Retired, e36 M3 Join Date: Mar 2009 Location: San Diego iTrader: (13)	There isn't much work involved at all. I have installed one and I didn't have to fit or adjust anything at all. I didn't touch the holes for the license plate bracket either. The trunk should close fine. Just press on it harder. It won't close as easy as OEM one because it is much lighter. I had the same issue with a VRS trunk for the same reason.
	Appreciate 0

02-08-2010, 11:46 PM	#122
montreal red chris 291 Rep 12,142 Posts Drives: White Boat Join Date: Jun 2007 Location: Toronto iTrader: (31)	btw, did you guys bring in any frp trunks yet ? __________________ Current: 2013 F10 M5 & 2016 Mini JCW 2013 GLK350 (gone), 997.1 GT3RS (gone), 2009 WRX STI (gone), e92 M3 (gone)
	Appreciate 0

02-18-2010, 12:41 PM	#125
CONSTRUCTauto.com Major 90 Rep 1,436 Posts Drives: e90 335i - Retired, e36 M3 Join Date: Mar 2009 Location: San Diego iTrader: (13)	We have the full amuse kit coming for a e92. That will make quite a combo together with the trunk.
	Appreciate 0

02-18-2010, 01:16 PM	#126
KWY91 Major 39 Rep 1,295 Posts Drives: 2015 BMW M3 (on order), 458 Join Date: Sep 2008 Location: Exeter, Devon iTrader: (3)	Please post up some pictures of the full kit, like their individual pics and fitment! Thanks! __________________ Wanna know my mods for my 335i? It's here! http://www.e90post.com/forums/showth...ght=blue+water Lamborghini's Mica Orange E93 M3 Akrapovic Exhaust //Challenge Rear CF diffuser//ESS VT-575 Supercharger
	Appreciate 0

02-18-2010, 02:13 PM	#128
KWY91 Major 39 Rep 1,295 Posts Drives: 2015 BMW M3 (on order), 458 Join Date: Sep 2008 Location: Exeter, Devon iTrader: (3)	Sounds great! __________________ Wanna know my mods for my 335i? It's here! http://www.e90post.com/forums/showth...ght=blue+water Lamborghini's Mica Orange E93 M3 Akrapovic Exhaust //Challenge Rear CF diffuser//ESS VT-575 Supercharger
	Appreciate 0

02-22-2010, 04:29 PM	#129
CONSTRUCTauto.com Major 90 Rep 1,436 Posts Drives: e90 335i - Retired, e36 M3 Join Date: Mar 2009 Location: San Diego iTrader: (13)	Last one sold. Getting some more in stock in 2 days!
	Appreciate 0

02-24-2010, 02:59 PM	#130
CONSTRUCTauto.com Major 90 Rep 1,436 Posts Drives: e90 335i - Retired, e36 M3 Join Date: Mar 2009 Location: San Diego iTrader: (13)	up
	Appreciate 0

02-26-2010, 06:47 PM	#131
CONSTRUCTauto.com Major 90 Rep 1,436 Posts Drives: e90 335i - Retired, e36 M3 Join Date: Mar 2009 Location: San Diego iTrader: (13)	back in stock!!!
	Appreciate 0

02-28-2010, 11:35 AM	#132
klipseracer Banned 228 Rep 3,012 Posts Drives: 2007 E90 335i, 05 E46 330i Join Date: Aug 2009 Location: Arizona iTrader: (27) Garage List 2007 335i [0.00] 2005 330i [0.00]	Figured I'd show a little bit more. Here is what the trunk looks like with Mtec rear+CF Diffuser. Keep in mind I'm missing that little trim piece between the bumper and diffuser. Also, for those of you having trouble closing the trunk, it just needs to be slammed. make sure it lines up right and slam it closed. The trunk is really strong I wouldn't be worried about it as long as you're using reasonable force. After a couple weeks, the trunk doesn't need to be slammed anymore. I think the rubber surround becomes accustomed to the new trunk and it fits perfect.
	Appreciate 0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search