Vishnu Cold Air Intake- Prototype... now with fake carbon fiber

Aridk · 08-15-2011, 04:48 AM

I think it was april when he started it

jippii ensio · 08-15-2011, 07:14 AM

Quote:

Originally Posted by Syndicategt

Anyway, just do your custom cai with stock airbox, should cost you less than $100. See my DIY. Shiv probably stopped production because a) not profitable enough or b) intake gains on this car are minimal at best.

The closed design of Mr. 5, yours and many others' was proven to be at least as good as DCI, if not better when tested 60-100MPH
http://www.e90post.com/forums/showthread.php?t=352077

georgelb · 08-15-2011, 08:26 AM

Quote:

Originally Posted by cstmx_ryder

That's your cue to upgrade to JB4 or procede.....

Who still uses JB ....lol. Those are so historic, they belong in a museum....no offense.

The post you quoted was from 2009.

PlutoniumTans · 08-15-2011, 11:13 AM

How much this will cost ?

bigdnno98 · 08-15-2011, 11:15 AM

1 for using current vish DCI!

cstmx_ryder · 08-15-2011, 01:16 PM

Quote:

Originally Posted by georgelb

The post you quoted was from 2009.

LOL.....Ya I just realized this yesterday.....Two years too late....sigh

M3 Eater · 08-15-2011, 03:09 PM

I made a box like this but let the car hood act as top sheild, so it was open box when the hood was open.

I was surprised at how much cooler to the touch the actual cones were after a bunch of logs. I think there is tons of potential here....

bahn stormer · 08-15-2011, 05:12 PM

Quote:

Originally Posted by M3 Eater

I made a box like this but let the car hood act as top sheild, so it was open box when the hood was open.

I was surprised at how much cooler to the touch the actual cones were after a bunch of logs. I think there is tons of potential here....

I made a custom intake from an OEM airbox that I bought from someone that made a box like this.

Joshboody · 08-15-2011, 05:39 PM

The pwm meth guys have to be creative now... this is an option, but I would think the pickup ducting would be a limitation also... probably a big one.

Syndicategt · 08-15-2011, 06:19 PM

Quote:

Originally Posted by Joshboody

The pwm meth guys have to be creative now... this is an option, but I would think the pickup ducting would be a limitation also... probably a big one.

You mean Vishnu's PWM Meth kit....I'm PWM but use a Aquamist HFS-3 PWM where the pump is located behind my bumper. There is plenty of room for a custom CAI in my case

08-15-2011, 04:48 AM	#133
Aridk Lieutenant 7 Rep 520 Posts Drives: 335i Join Date: Jan 2008 Location: Denmark iTrader: (0)	I think it was april when he started it
	Appreciate 0 Quote

08-15-2011, 11:13 AM	#136
PlutoniumTans Lieutenant 27 Rep 575 Posts Drives: 335i Join Date: Jul 2011 Location: Brooklyn,NY iTrader: (2)	How much this will cost ?
	Appreciate 0 Quote

08-15-2011, 11:15 AM	#137
bigdnno98 Real Car Enthusiast 289 Rep 2,082 Posts Drives: 340xi Join Date: Jul 2011 Location: Germany iTrader: (8)	Add on to vish dci 1 for using current vish DCI!
	Appreciate 0 Quote

08-15-2011, 03:09 PM	#139
M3 Eater Major 36 Rep 1,054 Posts Drives: 335i Sedan Join Date: May 2010 Location: Unknown iTrader: (3) Garage List 2007 335i [0.00]	I made a box like this but let the car hood act as top sheild, so it was open box when the hood was open. I was surprised at how much cooler to the touch the actual cones were after a bunch of logs. I think there is tons of potential here.... __________________ JB4 beta 15 ohms FSB,AEM inline filter/ CM 10, ETS fmic, ER custom made charge pipe,TSW Donnington 18's,Simitumo HTRZ3, Injen DCI, AR DPs, Forge DVs, AA SLD, Koni FSD, ZSP springs.
	Appreciate 0 Quote

08-15-2011, 05:39 PM	#141
Joshboody Lieutenant Colonel 66 Rep 1,708 Posts Drives: pickemuptruck Join Date: Jul 2009 Location: Phoenix, AZ iTrader: (7)	The pwm meth guys have to be creative now... this is an option, but I would think the pickup ducting would be a limitation also... probably a big one.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search