What did you do to your car today?

Chappers 71 · 11-06-2021, 05:13 PM

Fitted a new rear abs sensor & a new pair of Red Stuff rear pads

Serf27 · 11-06-2021, 05:18 PM

I tried to install a new radio with pixels that aren’t damaged, it isn’t working!

fazm · 11-06-2021, 08:20 PM

Bleh. That sucks.

Link your electric jack. I need to watch a 'how to lift this car with jacks' video or two.

And buy some jack pads. And those AESCO (?) jack stands.

Serf27 · 11-06-2021, 09:04 PM

Quote:

Originally Posted by fazm

Bleh. That sucks.

Link your electric jack. I need to watch a 'how to lift this car with jacks' video or two.

And buy some jack pads. And those AESCO (?) jack stands.

I got this one.
It works great. I’m not sure how long it will last.
I hooked it up directly to the jump start points in the engine bay.

Will be handy to get a jack stand under the car or for quick wheel swaps!

To lift the rear, I lift from the differential.

fazm · 11-06-2021, 10:06 PM

lol you forgot the link!

Serf27 · 11-06-2021, 10:38 PM

Quote:

Originally Posted by fazm

lol you forgot the link!

HAHAHA. I saw that and thought “let me edit this and add the link” and then I forgot that too.

ROGTZ Electric Car Floor Jack 3 Ton All-in-one Automatic 12v Scissor Lift Jack for Tire Change Replacement https://www.amazon.com/dp/B075679K9Q...ing=UTF8&psc=1

It’s a 3 ton. Almost got the 4ton because it’s cheaper but didn’t want it to struggle.

I’ll try to upload a video of it.

fazm · 11-07-2021, 08:02 AM

Thank you!

colorado.e9x · 11-07-2021, 01:06 PM

Retrofitted a cigarette lighter to the trunk last night. Not the best pic but thats fine

nsjames · 11-07-2021, 01:29 PM

winter wheels installed.
oil change performed.
7K before the lifter tick appeared, right on schedule.

BSM n54iS · 11-07-2021, 02:42 PM

I might make a separate thread, let me know..

Name: 78AC3995-63A4-48E9-A8EF-3B275A8EAF65.jpg
Views: 334
Size: 554.5 KB

nsjames · 11-07-2021, 04:54 PM

Quote:

Originally Posted by BdSM n54iS

I might make a separate thread, let me know..

Attachment 2737613

are you doing all the hard plastics and seats too?

cause I'd be into that.

The rent is too damn high on charcoal e91 interior pieces.

BSM n54iS · 11-07-2021, 05:32 PM

Quote:

Originally Posted by nsjames

are you doing all the hard plastics and seats too?

cause I'd be into that.

The rent is too damn high on charcoal e91 interior pieces.

Plastics and expanding rivets, yes.

Seats, no. What seats?

F13.KENN · 11-07-2021, 06:16 PM

Quote:

Originally Posted by BdSM n54iS

I might make a separate thread, let me know..

Attachment 2737613

Would the pieces retain the same feel when touching them after being sprayed?

Hoody007 · 11-07-2021, 06:23 PM

Quote:

Originally Posted by colorado.e9x

Retrofitted a cigarette lighter to the trunk last night. Not the best pic but thats fine

What do you use this for? Rear dashcam?

colorado.e9x · 11-07-2021, 06:26 PM

Quote:

Originally Posted by Hoody007

Quote:

Originally Posted by colorado.e9x

Retrofitted a cigarette lighter to the trunk last night. Not the best pic but thats fine

What do you use this for? Rear dashcam?

I could, but mostly just for fun. And also for a tire inflator, my right rear wheel needs to be replaced and I don't have the funds to do so right now.

fazm · 11-07-2021, 09:15 PM

Question for the class:

I've acquired an n54 oil filter housing, oil thermostat, hoses, and oil cooler radiator (along with all the dang screws, nuts, etc.)

I plan to install and mount it on my e91. I'm under the impression that it should be largely plug and play once I drop the bumper. I've also sourced the wheel well vent for the n54 and will cut my wheel well and mount it.

The question I have is: how do I push air into the thing? My e91 stock bumper has a fog light and an air duct headed to the brake area. I can dremel a portion out of it to add airflow into the general cavity in front of the cooler, but don't see much else in the way of options. Full disclosure - I don't need a race car tier solution, this mod is largely intended as belt and suspenders over the engine's existing ability to manage oil temperature via the water pump/radiator. That said, I don't want to just seal the thing up inside the engine bay, either!

Here's a thread where I've seen this done before:
https://www.e90post.com/forums/showthread.php?t=1435804

Mosaud1998 · 11-07-2021, 09:15 PM

Cleaned and conditioned the seats with chemical guys leather cleaner and conditioner kit. Also, did a quick vacuum.

Not a fan of the glossy conditioner but hopefully by tomorrow morning the seats aren't as glossy.

Thought about cleaning the carpet with a hot water extractor in the summer but the carpet looks new.

I'd say the condition of the interior is a 9.5/10. What do y'all think?

fazm · 11-07-2021, 09:16 PM

^^ that looks really good, man. Great work!

Oh, one other question - if I just decide to swap the bumper and want ducting for brakes, cooler, and fogs - what are my best options? I'm likely to paint the car some time next year anyway.

Serf27 · 11-07-2021, 09:26 PM

Quote:

Originally Posted by fazm

Question for the class:

I've acquired an n54 oil filter housing, oil thermostat, hoses, and oil cooler radiator (along with all the dang screws, nuts, etc.)

I plan to install and mount it on my e91. I'm under the impression that it should be largely plug and play once I drop the bumper. I've also sourced the wheel well vent for the n54 and will cut my wheel well and mount it.

The question I have is: how do I push air into the thing? My e91 stock bumper has a fog light and an air duct headed to the brake area. I can dremel a portion out of it to add airflow into the general cavity in front of the cooler, but don't see much else in the way of options. Full disclosure - I don't need a race car tier solution, this mod is largely intended as belt and suspenders over the engine's existing ability to manage oil temperature via the water pump/radiator. That said, I don't want to just seal the thing up inside the engine bay, either!

Here's a thread where I've seen this done before:
https://www.e90post.com/forums/showthread.php?t=1435804

The duct for the brakes on cars with coolers is smaller to allow room the cooler duct.
I think you could leave your stock brake air duct in place if you don’t use the duct for the cooler.

Serf27 · 11-07-2021, 09:27 PM

Quote:

Originally Posted by fazm

^^ that looks really good, man. Great work!

Oh, one other question - if I just decide to swap the bumper and want ducting for brakes, cooler, and fogs - what are my best options? I'm likely to paint the car some time next year anyway.

Get oem ducts and they will work.

fazm · 11-07-2021, 09:30 PM

So, OEM brake + cooler ducts, leave my fog in place, and install the vent into the wheel well?

Serf27 · 11-07-2021, 09:33 PM

Quote:

Originally Posted by fazm

So, OEM brake + cooler ducts, leave my fog in place, and install the vent into the wheel well?

Yes. Your front end is the same as any 335i that would’ve had the cooler already in place.

11-06-2021, 05:13 PM	#19031
Chappers 71 Major General 5972 Rep 5,722 Posts Drives: Beige G31 540ix m sport Join Date: Feb 2016 Location: Kent, The Garden of England iTrader: (0) Garage List 2018 G31 xdrive 40i ... [7.40] 2006 E92 335i SE [9.50]	Fitted a new rear abs sensor & a new pair of Red Stuff rear pads __________________ G31 40ix M Sport E92 335i. E36 328is coupe E39 540i V8 6SP manual E34 3.6 M5. E34 525i sport. VW Jetta Mk2 GTI 16v. 1679cc 1967 resto-cal beetle
	Appreciate 0 Quote

11-06-2021, 05:18 PM	#19032
Serf27 Brigadier General 2887 Rep 4,333 Posts Drives: 335i Join Date: Apr 2018 Location: Sitting in a BMW. iTrader: (-1)	I tried to install a new radio with pixels that aren’t damaged, it isn’t working!
	Appreciate 0 Quote

11-06-2021, 08:20 PM	#19033
fazm First Lieutenant 627 Rep 352 Posts Drives: 2009 BMW E91 xDrive Join Date: Apr 2021 Location: Dallas, TX iTrader: (2)	Bleh. That sucks. Link your electric jack. I need to watch a 'how to lift this car with jacks' video or two. And buy some jack pads. And those AESCO (?) jack stands.
	Appreciate 0 Quote

11-06-2021, 10:06 PM	#19035
fazm First Lieutenant 627 Rep 352 Posts Drives: 2009 BMW E91 xDrive Join Date: Apr 2021 Location: Dallas, TX iTrader: (2)	lol you forgot the link!
	Appreciate 0 Quote

11-07-2021, 08:02 AM	#19037
fazm First Lieutenant 627 Rep 352 Posts Drives: 2009 BMW E91 xDrive Join Date: Apr 2021 Location: Dallas, TX iTrader: (2)	Thank you!
	Appreciate 0 Quote

11-07-2021, 01:06 PM	#19038
colorado.e9x eBay Special 3665 Rep 3,185 Posts Drives: E90 330xi Join Date: Feb 2018 Location: Western Slope, Colorado iTrader: (1) Garage List 2006 BMW 330xi [10.00] 2007 BMW 328xi [8.33]	Retrofitted a cigarette lighter to the trunk last night. Not the best pic but thats fine Attached Images __________________ Common sense is a flower that does not bloom in everyone's garden
	Appreciate 2 3PedalJake3449.00 Seattlesquash979.00 Quote

11-07-2021, 01:29 PM	#19039
nsjames Brigadier General 2463 Rep 4,328 Posts Drives: 08 328xi Touring Join Date: May 2017 Location: ohio iTrader: (0)	winter wheels installed. oil change performed. 7K before the lifter tick appeared, right on schedule.
	Appreciate 0 Quote

11-07-2021, 02:42 PM	#19040
BSM n54iS Brigadier General 2683 Rep 4,203 Posts Drives: '11 335is \| '16 Macan Turbo Join Date: Aug 2015 Location: Everywhere and Nowhere iTrader: (7)	I might make a separate thread, let me know.. __________________ '11 335is BSM MT "BMW Performance Editon" \| '16 Porsche Macan Turbo GruppeM CF Intake \| AR Resonated DP \| ER CP \| Turbosmart RacePort BOV \| Cobb FMIC \| RB Inlets \| RB External Mishi/Turner OCC \| Michelin PS4 \| BMW Performance Springs/Bilstein B8 + Dinan & M3 bits \| BMW Brembo BBK \| BMW Performance CF Spoiler \| BMW Performance CF Lip \| BMW Performance Alcantara \| PS Designs GTS Armrest \| AG H6-40 \| Rear Seat Delete
	Appreciate 1 F13.KENN612.50 Quote

11-07-2021, 09:15 PM	#19046
fazm First Lieutenant 627 Rep 352 Posts Drives: 2009 BMW E91 xDrive Join Date: Apr 2021 Location: Dallas, TX iTrader: (2)	Question for the class: I've acquired an n54 oil filter housing, oil thermostat, hoses, and oil cooler radiator (along with all the dang screws, nuts, etc.) I plan to install and mount it on my e91. I'm under the impression that it should be largely plug and play once I drop the bumper. I've also sourced the wheel well vent for the n54 and will cut my wheel well and mount it. The question I have is: how do I push air into the thing? My e91 stock bumper has a fog light and an air duct headed to the brake area. I can dremel a portion out of it to add airflow into the general cavity in front of the cooler, but don't see much else in the way of options. Full disclosure - I don't need a race car tier solution, this mod is largely intended as belt and suspenders over the engine's existing ability to manage oil temperature via the water pump/radiator. That said, I don't want to just seal the thing up inside the engine bay, either! Here's a thread where I've seen this done before: https://www.e90post.com/forums/showthread.php?t=1435804
	Appreciate 0 Quote

11-07-2021, 09:15 PM	#19047
Mosaud1998 Colonel 4154 Rep 2,739 Posts Drives: 2019 BMW 540 Join Date: Nov 2019 Location: Suburb of Chicago iTrader: (0) Garage List 2019 BMW 540 [0.00]	Cleaned and conditioned the seats with chemical guys leather cleaner and conditioner kit. Also, did a quick vacuum. Not a fan of the glossy conditioner but hopefully by tomorrow morning the seats aren't as glossy. Thought about cleaning the carpet with a hot water extractor in the summer but the carpet looks new. I'd say the condition of the interior is a 9.5/10. What do y'all think? Attached Images
	Appreciate 3 fazm627.00 Karlos20945200.00 Dpc2u11490.50 Quote

11-07-2021, 09:16 PM	#19048
fazm First Lieutenant 627 Rep 352 Posts Drives: 2009 BMW E91 xDrive Join Date: Apr 2021 Location: Dallas, TX iTrader: (2)	^^ that looks really good, man. Great work! Oh, one other question - if I just decide to swap the bumper and want ducting for brakes, cooler, and fogs - what are my best options? I'm likely to paint the car some time next year anyway.
	Appreciate 1 Mosaud19984153.50 Quote

11-07-2021, 09:30 PM	#19051
fazm First Lieutenant 627 Rep 352 Posts Drives: 2009 BMW E91 xDrive Join Date: Apr 2021 Location: Dallas, TX iTrader: (2)	So, OEM brake + cooler ducts, leave my fog in place, and install the vent into the wheel well?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search