All COBB Tuning AccessPORT Flash for N54 335i Discussion Here

dominick · 08-02-2011, 10:39 AM

sup slimmy, Im getting my cobb on Wed and was planing to go to moroso next wed to see how she runs. You down?

mithiral67 · 08-02-2011, 11:20 AM

Quote:

Originally Posted by Slimmy

Yes, traction control was on, and I was just driving in normal mode, I'll have to try DS or M so I can control the RPM shift points.

Yea, turn TC off and do a 3rd gear pull (4th if you feel safe), then cut the before and after data off before graphing.

Slimmy · 08-02-2011, 10:36 PM

Switched to 93 map tonight, and did some more logging, this one was on a highway on-ramp. TC off, manual mode. How's it look?

franzzz · 08-05-2011, 05:39 AM

Hi
After a Cobb install on my Stock 2007 335i AT, i got the following code after a couple of miles :

2FA3:
2FA3 Coding missing
Error will not cause a warning light
Error is currently present
Test conditions have been completed

Freeze Frame Information
Event 1Odometer 59520kms 36984miles
Engine speed 0,00 rpm
voltage Kl. 87 12,49 V
status motor control 0,00 0-n
time since start end 0,00 s

2A18:
2A18 DMTL diagnosis module tank leakage, heating: input signal
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Timeout

Any ideas ?

Cobb work great and the car is very fast !!! AT shifting was much better than stock.

also uninstalled it and checked with BMW program INPA and NO codes and the dates of the ECU were still as stock . Completely untampered. :-)

Tuner1984 · 08-05-2011, 06:56 AM

Quote:

Originally Posted by franzzz

Hi
After a Cobb install on my Stock 2007 335i AT, i got the following code after a couple of miles :

2FA3:
2FA3 Coding missing
Error will not cause a warning light
Error is currently present
Test conditions have been completed

Freeze Frame Information
Event 1Odometer 59520kms 36984miles
Engine speed 0,00 rpm
voltage Kl. 87 12,49 V
status motor control 0,00 0-n
time since start end 0,00 s

2A18:
2A18 DMTL diagnosis module tank leakage, heating: input signal
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Timeout

Any ideas ?

Cobb work great and the car is very fast !!! AT shifting was much better than stock.

also uninstalled it and checked with BMW program INPA and NO codes and the dates of the ECU were still as stock . Completely untampered. :-)

From what I remember one of the codes you can't get rid of while the AP is installed. However, once uninstalled like you already found out there aren't any tuner or hidden codes stored in the DME.

Pseudo Nim · 08-05-2011, 07:23 AM

Quote:

Originally Posted by Tuner1984

From what I remember one of the codes you can't get rid of while the AP is installed. However, once uninstalled like you already found out there aren't any tuner or hidden codes stored in the DME.

That's not the code he posted tho - you're referring to 2F85 or something, the "plausibility" code - that the tuner code that stays up all the time. His codes are different (no idea why they're being thrown though).

franzzz · 08-05-2011, 08:33 AM

Quote:

Originally Posted by Tuner1984

From what I remember one of the codes you can't get rid of while the AP is installed. However, once uninstalled like you already found out there aren't any tuner or hidden codes stored in the DME.

Yes first code is due to a "married" Cobb.....

New entry of my list is 2A18
A new code found and never see before

dzenno · 08-05-2011, 08:39 AM

Coding missing code will be removed with the next update...beta pre-release flash already has it solved...

mithiral67 · 08-05-2011, 08:53 AM

Quote:

Originally Posted by dzenno

Coding missing code will be removed with the next update...beta pre-release flash already has it solved...

every day you post about the fact you have that map, is a day I hate you.

Zasquatch · 08-05-2011, 10:06 AM

Quote:

Originally Posted by mithiral67

every day you post about the fact you have that map, is a day I hate you.

+1

Black Sheep · 08-05-2011, 10:33 AM

+2 You suck

Pseudo Nim · 08-05-2011, 10:34 AM

Quote:

Originally Posted by dzenno

Coding missing code will be removed with the next update...beta pre-release flash already has it solved...

Not the beta stage 2 map it doesn't, which map are you talking about?

COBB Tuning · 08-05-2011, 11:49 AM

Quote:

Originally Posted by franzzz

Hi
After a Cobb install on my Stock 2007 335i AT, i got the following code after a couple of miles :

2FA3:
2FA3 Coding missing
Error will not cause a warning light
Error is currently present
Test conditions have been completed

Freeze Frame Information
Event 1Odometer 59520kms 36984miles
Engine speed 0,00 rpm
voltage Kl. 87 12,49 V
status motor control 0,00 0-n
time since start end 0,00 s

2A18:
2A18 DMTL diagnosis module tank leakage, heating: input signal
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Timeout

Any ideas ?

Cobb work great and the car is very fast !!! AT shifting was much better than stock.

also uninstalled it and checked with BMW program INPA and NO codes and the dates of the ECU were still as stock . Completely untampered. :-)

The 2FA3 code is a normal background code that occurs while the AccessPORT is installed on a BMW. We will be removing this in a future firmware update. The 2A18 code is due your Italian car not having the same emissions control systems as a USDM car. Is it causing a engine light on the dash?

Ian

dzenno · 08-05-2011, 01:16 PM

Quote:

Originally Posted by Budz135i

+2 You suck

Quote:

Originally Posted by Zasquatch

+1

Quote:

Originally Posted by mithiral67

every day you post about the fact you have that map, is a day I hate you.

lol, i'm doing you guys a favour here..shit hits the fan it'll be my car...but yea, i take that risk ALL the time...lol

Quote:

Originally Posted by Pseudo Nim

Not the beta stage 2 map it doesn't, which map are you talking about?

i'm talking about the "Coding Missing" error code...that one is resolved in the beta firmware i'm running as I don't get any codes any more installing/uninstalling Cobb..unless you're running this pre-release firmware on your car you'll most likely still have it..

Pseudo Nim · 08-05-2011, 01:19 PM

Quote:

Originally Posted by dzenno

lol, i'm doing you guys a favour here..shit hits the fan it'll be my car...but yea, i take that risk ALL the time...lol

i'm talking about the "Coding Missing" error code...that one is resolved in the beta firmware i'm running as I don't get any codes any more installing/uninstalling Cobb..unless you're running this pre-release firmware on your car you'll most likely still have it..

ahh -- I don't get any more codes installing/uninstalling either, i thought you were talking about the catless code delete.

dzenno · 08-05-2011, 01:29 PM

Quote:

Originally Posted by Pseudo Nim

ahh -- I don't get any more codes installing/uninstalling either, i thought you were talking about the catless code delete.

that's resolved in beta as well, not sure what Cobb plans in terms of release, maybe along with stage 2 for "offroad" setups?

themyst · 08-05-2011, 01:45 PM

Damn all of you Cobb AP stage 2 beta testers

looking forward to results!

franzzz · 08-05-2011, 02:39 PM

Quote:

Originally Posted by COBB Tuning

The 2FA3 code is a normal background code that occurs while the AccessPORT is installed on a BMW. We will be removing this in a future firmware update. The 2A18 code is due your Italian car not having the same emissions control systems as a USDM car. Is it causing a engine light on the dash?

Ian

Yes
Sometimes the mil still on after engine start.
No others particular trouble found. Only this code.
Tnx

MidwestGolfBum · 08-05-2011, 06:23 PM

Quote:

Originally Posted by dzenno

I'm talking about the "Coding Missing" error code...that one is resolved in the beta firmware i'm running as I don't get any codes any more installing/uninstalling Cobb..unless you're running this pre-release firmware on your car you'll most likely still have it..

You may not know and I should ask Cobb, but is this clearing the way for on the fly map switching? Not that I see a lot of use for it right now, still be kind of cool to have if there was more granularity to boost levels and tunes available.

dzenno · 08-05-2011, 06:26 PM

Rock solid tune first, gimmicks second

MidwestGolfBum · 08-05-2011, 06:27 PM

Fair enough and I completely agree, just wondering if it was a step in that direction.

themyst · 08-05-2011, 06:53 PM

Quote:

Originally Posted by dzenno

Rock solid tune first, gimmicks second

+1

08-02-2011, 10:39 AM	#1893
dominick Private First Class 1 Rep 119 Posts Drives: 08 335i Join Date: Jun 2011 Location: S. Florida iTrader: (2)	sup slimmy, Im getting my cobb on Wed and was planing to go to moroso next wed to see how she runs. You down?
	Appreciate 0 Quote

08-02-2011, 10:36 PM	#1895
Slimmy New Member 2 Rep 26 Posts Drives: 2007 335i Join Date: May 2011 Location: Ft. Lauderdale, FL iTrader: (1)	Switched to 93 map tonight, and did some more logging, this one was on a highway on-ramp. TC off, manual mode. How's it look?
	Appreciate 0 Quote

08-05-2011, 05:39 AM	#1896
franzzz Captain 148 Rep 932 Posts Drives: BMW M4 Join Date: Feb 2010 Location: ITALY iTrader: (0)	Hi After a Cobb install on my Stock 2007 335i AT, i got the following code after a couple of miles : 2FA3: 2FA3 Coding missing Error will not cause a warning light Error is currently present Test conditions have been completed Freeze Frame Information Event 1Odometer 59520kms 36984miles Engine speed 0,00 rpm voltage Kl. 87 12,49 V status motor control 0,00 0-n time since start end 0,00 s 2A18: 2A18 DMTL diagnosis module tank leakage, heating: input signal Error will cause a warning light Error is not currently present Test conditions have been completed Timeout Any ideas ? Cobb work great and the car is very fast !!! AT shifting was much better than stock. also uninstalled it and checked with BMW program INPA and NO codes and the dates of the ECU were still as stock . Completely untampered. :-) __________________ BMW F82 M4 Black MHD CS Map - GTS DKG - Navi -Performance Brake RSL1 Pads - USB - DivX-DVD - Bluetooth - VoiceControl - Connect - Apps - Online - H&K - TrafficInfo - SpLimInfo - WhiteMerino- PDC - Cam - Adaptive Led - Antitheft - CP Steering- Performance ST - Adaptive CP Setup - GarageDoorOpen - Pipercross - Stock Exhaust - Mdrivers Pack - 437M Wheels
	Appreciate 0 Quote

08-05-2011, 08:39 AM	#1900
dzenno Banned 298 Rep 5,876 Posts Drives: Join Date: Feb 2006 iTrader: (1)	Coding missing code will be removed with the next update...beta pre-release flash already has it solved...
	Appreciate 0 Quote

08-05-2011, 10:33 AM	#1903
Black Sheep A Zip an a Double Cup 80 Rep 4,462 Posts Drives: 2009 BMW 135i Join Date: Feb 2010 Location: McHenry, IL iTrader: (5)	+2 You suck __________________ PTF Tuned \| RB's \| AMS FMIC \| AR DP's \| HPF Exhaust \| CP-E DCI \| Apex Arc 8's \| 235/275 Star Specs \|
	Appreciate 0 Quote

08-05-2011, 01:45 PM	#1909
themyst Major General 192 Rep 6,631 Posts Drives: '16 MK7 GTI Join Date: Feb 2009 Location: NYC iTrader: (8)	Damn all of you Cobb AP stage 2 beta testers looking forward to results! __________________ E90 LCI N54 6AT
	Appreciate 0 Quote

08-05-2011, 06:26 PM	#1912
dzenno Banned 298 Rep 5,876 Posts Drives: Join Date: Feb 2006 iTrader: (1)	Rock solid tune first, gimmicks second
	Appreciate 0 Quote

08-05-2011, 06:27 PM	#1913
MidwestGolfBum Knower of all Things Useless 33 Rep 254 Posts Drives: Space Grey E92s Join Date: Jan 2011 Location: No Coast iTrader: (0)	Fair enough and I completely agree, just wondering if it was a step in that direction.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search