VRSF Intercooler Guys: Installation

335imax · 03-20-2015, 08:15 PM

Received the Stepped 5 inch VRSF Intercooler, it came with a rubber straight tube, or pipe to connect to the passenger side and rubber 90 deg pipe (driver side) Do I have to reuse, or cut some of my existing plastic piping to attach this thing? How do I remove that pressed metal clamp on my original plastic pipe.

Brule · 03-20-2015, 08:22 PM

Cut it with a dremel. It's a one time use clamp you dont need it

335imax · 03-20-2015, 11:26 PM

Can't quite get the passenger side all the way up. Its not perfectly level with the Driver's side. Is there a trick? Don't want to over tighten. Feels like its jammed up all the way and maybe hitting something but only on the passenger side.

PR3CI5N · 03-20-2015, 11:30 PM

Quote:

Originally Posted by 335imax

Can't quite get the passenger side all the way up. Its not perfectly level with the Driver's side. Is there a trick? Don't want to over tighten. Feels like its jammed up all the way and maybe hitting something but only on the passenger side.

You need to remove a plastic supprt piece. It's a small triangular piece that is used to hold up the radiator. It will wiggle out if you work it hard enough. No need to cut.

335imax · 03-21-2015, 12:06 AM

I think I found it. How much of it should I remove. It appears to be holding up the radiator? Not sure I can remove without breaking it. OR is this not it.

PR3CI5N · 03-21-2015, 12:14 AM

Looks like it. It wiggles out. I removed it on mine and my buddies with no problems. IC fits perfect once this piece is removed.

03-20-2015, 08:15 PM	#1
335imax Second Lieutenant 45 Rep 210 Posts Drives: 2012 335i Join Date: Sep 2010 Location: Virginia iTrader: (1)	VRSF Intercooler Guys: Installation Received the Stepped 5 inch VRSF Intercooler, it came with a rubber straight tube, or pipe to connect to the passenger side and rubber 90 deg pipe (driver side) Do I have to reuse, or cut some of my existing plastic piping to attach this thing? How do I remove that pressed metal clamp on my original plastic pipe. __________________ M Performance Suspension Last edited by 335imax; 03-20-2015 at 11:24 PM..
	Appreciate 0 Tweet Quote

03-20-2015, 08:22 PM	#2
Brule Brigadier General 842 Rep 3,190 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Cut it with a dremel. It's a one time use clamp you dont need it
	Appreciate 0 Quote

03-20-2015, 11:26 PM	#3
335imax Second Lieutenant 45 Rep 210 Posts Drives: 2012 335i Join Date: Sep 2010 Location: Virginia iTrader: (1)	Having trouble getting it perfectly level Can't quite get the passenger side all the way up. Its not perfectly level with the Driver's side. Is there a trick? Don't want to over tighten. Feels like its jammed up all the way and maybe hitting something but only on the passenger side. __________________ M Performance Suspension
	Appreciate 0 Quote

03-21-2015, 12:06 AM	#5
335imax Second Lieutenant 45 Rep 210 Posts Drives: 2012 335i Join Date: Sep 2010 Location: Virginia iTrader: (1)	Is this the triangle that needs to go? I think I found it. How much of it should I remove. It appears to be holding up the radiator? Not sure I can remove without breaking it. OR is this not it. Attached Images __________________ M Performance Suspension
	Appreciate 0 Quote

03-21-2015, 12:14 AM	#6
PR3CI5N need4speed 510 Rep 1,903 Posts Drives: 2010 E90 M 335i Join Date: Jun 2010 Location: West Coast iTrader: (24)	Looks like it. It wiggles out. I removed it on mine and my buddies with no problems. IC fits perfect once this piece is removed.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search