[wilkr1]

In the spreadsheet…
https://spreadsheets.google.com/ccc?...CPqY7sEC#gid=0

I am trying to code the following..

-Disable iDrive Legal Disclaimer CIC LEGAL_DISCLAIMER_TIME Set to "kein_ld" to disable the disclaimer.

-Close Windows/Roof with Fob CAS KOMFORTSCHLIESSUNG_FB X Closes windows + moon roof through Key Fob


Fold mirrors w/ FOB FRM (NFRM) SPIEGEL_KOMFORT_EINKLAPP or ASP_KOMFORT_EINKLAPP

Wiper wipes to End position after turning engine off JBBF (2JBBF) ZYCLUS_VOLLEND_KLR_AUS


I searched in the FSW PSW MAN(From my Chassis) for the values but I have not found not one of those values. Am I looking in the wrong place for those values? Also is the spreadsheet up to date?

[wilkr1]

I guess no one ever ran into this one. Anyway just as FYI, I had to open the file FSW PSW MAN, do a search for value. After finding value, save file, Close, reopen and search again for next value. This is what worked for me.

[cryptomit]

first read data, open FSW_PSW.trc (not MAN) edit it and save as FSW_PSW.man

[wilkr1]

Oh..could this be why car is not starting? When i did the coding i had no errors. Now car will not start, radio, nav, etc all turn on with no issue. I put the key fob in and hit start the fob pops out, car doesnt start. How do i revert to the old config? If its not to late, i hope. I have to go pick up a battery today to put into see if it was that battery that died, since i was coding for about an hour with car and radio on.

[cryptomit]

check battery first and if car will not start then I will tell you what to do.

[wilkr1]

Will do...thanks