[musseilm]

Hi,

programmed the car yesterday so the mirrors fold up by them self when i lock the car and it works great.
Now today i noticed that my windows dont go down when i open the door.

Normally on the e92's the window goes down when you open the door and back up when the door is closed so they push into the rubber.

It stopped working... I did the window reset through INPA but no luck.

Anyone? Thanks

[josehon]

In my E93, It is control in FRM2 module.

I am using NCSExpert and NCSDummy. Look into FRM2 (that is what I have).

Parameter to look for:
COUPETUER - DROP POWER WINDOW WHEN OPENING FRAMELESS COUPE DOOR
Value:
aktiv - enabled

Hope this help.

[mittie]

Hi. Did you fixed the issue with windows on e92? I have exactly the same after folding mirrors coding.

[mittie]

I tried to look into my FRM trace and could not find anything similar to "COUPETUER - DROP POWER WINDOW WHEN OPENING FRAMELESS COUPE DOOR". Can it be that this parameter is not being decoded and thus not being shown? I attached my FRM trace just in case somebody would like to look.

[Sensible_]

Tried this?

http://www.e90post.com/forums/showth...51#post7410151

[madmantwo]

Originally Posted by Sensible_

Tried this?

http://www.e90post.com/forums/showth...51#post7410151

Had the same problem before and this fixed it. I replaced my FRM and every time my battery is unplugged for a reasonable amount of time I have to re-do this procedure.

[Dtype]

Need to reset windows. Close doors, and force by opening windows all the way on the button, and then push the button around 5 seconds. Close the window and do the same to booth windows. After opening and after closing force the button around 5 secs.

[mittie]

Did reset windows with several procedures, did not help. Fixed the issue by restoring factory default coding settings for FRM and CAS modules. And then starting over with NCSDummy editor.

[markyb0]

http://www.e90post.com/forums/showthread.php?t=1002840

this worked for me