|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
 |
|
BMW 3-Series (E90 E92) Forum
>
Can't figure out these codes!
|
 |
| 10-09-2015, 10:02 PM | #1 |
|
Private
 17
Rep 72
Posts |
Can't figure out these codes!
Hi all,
I started getting a misfire that would lead to a limp mode recently, and just ran the BT Tool to find these odd codes. The car will only misfire/Limp Mode after maybe 5 seconds of full throttle. Also, I have the JB4 to fault code reset mode, so maybe thats the problem? 6577 Error will cause a warning light Error is not currently present Test conditions have not been completed Timeout Signal or value below threshold Short circuit or signal interruption 03F0 Error will not cause a warning light Error is not currently present Test conditions have been completed 0068 Error will not cause a warning light Error is currently present Test conditions have not been completed Timeout 0080 Error will cause a warning light Error is not currently present Test conditions have been completed 0733 Error will not cause a warning light Error is currently present Test conditions have not been completed Timeout 0400 Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout E282 Error will not cause a warning light Error is not currently present Test conditions have been completed Thanks!!
__________________
JB4, DPs, Style 313 wheels, M-Sport front bumper, Inlets, DCI
|
 |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
