[Dtype]

Hi all.
I have a cic retrofit on my 2007 e91.
Every time I want to update maps, when I put fsc code, I need to cut can low and can high, because if I don't cut the can wires, even putting right code, always keep warning about wrong code. So I cut wires, do the update and at the end I tap can wires again. So it's a job I do once a year. Do you know any way so I don't need to do this? Because to do this I need to take cic off to cut the wires. I already thought to plug can wires to a switch so I can turn on or
Off, but if you know any easy way, educate me. Thanks.

[_TB_]

Seems like your CIC is script activated? Then you need fstool to "disable" fsc code check when updating.

[Dtype]

Originally Posted by _TB_

Seems like your CIC is script activated? Then you need fstool to "disable" fsc code check when updating.

Yes, is script activated. I suppose it's when cic verify CAS vin, right? Do you know the steps on fsc tools?

[BeGood69]

Originally Posted by Dtype

Yes, is script activated. I suppose it's when cic verify CAS vin, right? Do you know the steps on fsc tools?

Did anyone ever posted a solution? If not by removing high and low can does it work to update? I have a 2011 maps and need update on this retrofit. But it always call for wrong code. Please help (script activated)

[Dtype]

Originally Posted by BeGood69

Did anyone ever posted a solution? If not by removing high and low can does it work to update? I have a 2011 maps and need update on this retrofit. But it always call for wrong code. Please help (script activated)

Just do a "Check FSC" and then do the update.