|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Misfiring only with Jb4 active
|
|
03-18-2016, 09:07 PM | #1 |
New Member
2
Rep 28
Posts |
Misfiring only with Jb4 active
08 335xi w/ DCI and JB4 (w/ most recent firmware and default settings)
When throttle is 50% to wot I get an SES light and the car shutters. After pulling codes multiple times it's always a misfire on cyl 6 and 2d2e (angle of throttle valve - intake pipe under pressure). This is on either map 1 or map 5. I can clear codes and the car drives normally until I get on it. When stock the car runs great especially at wot. This started out of nowhere. Prior to this the car was running great with jb4 active. This makes me think I should try replacing the spark plugs as they are pretty old. Might even be original (70k miles on them, 5k with jb4) I bought it used at 60k. Any thoughts? I'm thinking start with plugs and go from there. Thanks! |
03-19-2016, 01:35 PM | #3 |
BimmerPost Supporting Vendor
27455
Rep 196,893
Posts |
Start by changing spark plugs
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
03-19-2016, 02:06 PM | #4 |
3474
Rep 79,211
Posts
Drives: C6 Z06, 09 335i, 10 335xi
Join Date: Dec 2008
Location: www.TopGearSolutions.com
|
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|