[TSM330i]

http://www.e90post.com/forums/showthread.php?t=1275629

[sirantsE90]

Originally Posted by TSM330i

http://www.e90post.com/forums/showthread.php?t=1275629

Rob,
No way your selling this! Whoever get this is getting a well sorted car.

Good luck man and hope your well.

Hows AER treating you?

[TSM330i]

Originally Posted by sirantsE90

Rob,
No way your selling this! Whoever get this is getting a well sorted car.

Good luck man and hope your well.

Hows AER treating you?

Bump

Sorry, I haven't looked at the regional board since I posted this.

Running NJMP AER event this weekend in a Spec E46. It's one of Steve's clients from Bimmerworks and we actually have four drivers. It'll be odd for me not to drive six hours in a race

[sirantsE90]

Originally Posted by TSM330i

Bump

Sorry, I haven't looked at the regional board since I posted this.

Running NJMP AER event this weekend in a Spec E46. It's one of Steve's clients from Bimmerworks and we actually have four drivers. It'll be odd for me not to drive six hours in a race

Nice. I'll actually be in the area this weekend. Maybe I'll swing by to check it out.

I'll text you if I head over.

[TSM330i]

Originally Posted by sirantsE90

Nice. I'll actually be in the area this weekend. Maybe I'll swing by to check it out.

I'll text you if I head over.

Cool! LMK

[TSM330i]

TTT

[TSM330i]

Considering parting out my car.

Stoptech BBK
Diffsonline LSD
Advan RS (would need some wheels for partial trade with good tires)
CF Carbon 8 hood (would need a TSM stock hood)
CF Vorsteiner CSL trunk (would need a TSM stock trunk)
BMW Performance Electric V2 Steering wheel

[TSM330i]

Bump for part-out/car sale

[TSM330i]

Bump

Definitely parting the car out. LMK if you're interested in any parts.

Please keep in mind, the brakes will NOT work on a 335. They have different piston sizes and will create an imbalance that is rearward biased so stability under hard braking would be compromised.
I'm checking to see if they will work on a 325/8 now.

Rear diff will only work with a 2006 325/330.

[milfriez]

What about front bumper/lip?

[TSM330i]

Originally Posted by milfriez

What about front bumper/lip?

It's possible. We're probably about 4 hours apart.
I don't know if there's a difference from the 330 and 335 bumper though.

[milfriez]

Originally Posted by TSM330i

It's possible. We're probably about 4 hours apart.
I don't know if there's a difference from the 330 and 335 bumper though.

Good question. I'm not familiar enough with the 330 to make a call on that. Mine is however a pre-lci if that has any bearing on it. Prod date I believe is 3/2007.

EDIT: This would seem to indicate that it *should* fit on both cars.

http://www.bmpdesign.com/products/pe...-body-kits.php

[TSM330i]

Originally Posted by milfriez

Good question. I'm not familiar enough with the 330 to make a call on that. Mine is however a pre-lci if that has any bearing on it. Prod date I believe is 3/2007.

EDIT: This would seem to indicate that it *should* fit on both cars.

http://www.bmpdesign.com/products/pe...-body-kits.php

I think this is the definitive answer that it will fit.
https://www.ecstuning.com/b-genuine-...FcdZhgodOJkJUw

How much would you be looking to spend? I also have a rep 3D lip that'll go with it.
How could we do this?

[milfriez]

Originally Posted by TSM330i

I think this is the definitive answer that it will fit.
https://www.ecstuning.com/b-genuine-...FcdZhgodOJkJUw

How much would you be looking to spend? I also have a rep 3D lip that'll go with it.
How could we do this?

Well looking at everything done to your car it's seems you would be way more versed in matters of upgrades. Do you have contacts or suggestions on who could remove and fit the new bumper and swap it out for the stock bumper in relatively quick fashion?

Perhaps maybe a shop that could do both the swap and walnut blast? My cars about 79k and I don't think it's ever been done and I really want to get it done before I start slapping mods onto it.

As far as price; not sure how much I was looking to spend to be honest. I'm flexible though.

[TSM330i]

Originally Posted by milfriez

Well looking at everything done to your car it's seems you would be way more versed in matters of upgrades. Do you have contacts or suggestions on who could remove and fit the new bumper and swap it out for the stock bumper in relatively quick fashion?

Perhaps maybe a shop that could do both the swap and walnut blast? My cars about 79k and I don't think it's ever been done and I really want to get it done before I start slapping mods onto it.

As far as price; not sure how much I was looking to spend to be honest. I'm flexible though.

I can contact Eric @ Helix to see if he'd be able to do the bumper swap and walnut blasting at the same time.
http://store.helix13.com/

[sdot6116]

Hit me up.. what parts do you have left?

[sdot6116]

8458218889