[imy]

Hi,

So the garage just done the rear lci conversion for me. They called to say that when you put the car into reverse the fog lights come on.

I remember reading somewhere that some wiring needed to be swapped somewhere but i cant find the posts anywhere!

Also been told that one of the indicators dont work at all. Does this mean a faulty unit? (EDIT: Its the NS Brake light that is not working not the indicator)

Thanks

[abeardo83]

Have they used the Pre to Post LCI connectors?

[imy]

Originally Posted by abeardo83

Have they used the Pre to Post LCI connectors?

No, its not required. I just need to switch the wiring around. I think I have found the guide to the wiring but i am wondering if the brake light is not working at all do i need to replace the unit?

[JJ0063]

Should just be a bulb Imy.

Just swap the pins round in the plug, don't cut any wires. Should all work then apart from needing coding.

Good luck!

[imy]

Originally Posted by JJ0063

Should just be a bulb Imy.

Just swap the pins round in the plug, don't cut any wires. Should all work then apart from needing coding.

Good luck!

thanks

[imy]

Originally Posted by JJ0063

Should just be a bulb Imy.

Just swap the pins round in the plug, don't cut any wires. Should all work then apart from needing coding.

Good luck!

Are you able to give me a guide of how the wires should line up as I'm having some real problems here. Thanks

Also I've been told brake light is not a bulb and requires a whole new unit?!

Edit: managed to sort the wiring. Was actually a very simple job took 10mins once I got the right order. Passenger side brake light still not working though

[marc l]

On my e93 I had to code it afterwards with Carly. Have you done that?

[imy]

Nope not yet. coding will be done next week which should hopefully sort out the indicators.

Conversion really makes a huge difference, had the parts lying around for ages, really questioning why I didn't do it earlier!