[Furatxp]

Where do I get download INPA software?

[LMB335IS]

Originally Posted by Furatxp

Where do I get download INPA software?

Look down 3 and 5 threads.

[Furatxp]

Originally Posted by LMB335IS

Look down 3 and 5 threads.

I though INPA is bigger than 1.5GB.

[LMB335IS]

Originally Posted by Furatxp

I though INPA is bigger than 1.5GB.

The daten that BMW Standard Tools 2.12 (INPA, NCS Expert, WinKFP, Tool 32) runs on is about 4.5GBs. My INPA .rar file is 26 MB.

[Furatxp]

Originally Posted by LMB335IS

The daten that BMW Standard Tools 2.12 (INPA, NCS Expert, WinKFP, Tool 32) runs on is about 4.5GBs. My INPA .rar file is 26 MB.

Oh thanks man for some reason I though its more than 15GB.

[Joe@TopGearSolutions]

Originally Posted by Furatxp

Oh thanks man for some reason I though its more than 15GB.

If you import the full E89 DATEN, then you'll be around 12-13 GB. Even more if you import more than one set of DATENs.

Some tend to utilize the "lite" version, which don't have the firmware files for CCC/CIC, which are where the larger files are located.

[matteblue3er]

Originally Posted by Furatxp

Oh thanks man for some reason I though its more than 15GB.

Programming files are what take up the majority of space. "lite" versions do not contain ANY programming files. The programs themselves are not that larger. The daten and ECU files required to read and write to modules are around 4-5GB for E9x or technically E89.

[bayerischer]

so just to get this straight, i dont want any programming or flashing the modules, only diagnosting my e92 335d, do i need sp date for that too, or is it just ok to download INPA 6.4.3 and 5.0.2 combination that i saw for download?

[Joe@TopGearSolutions]

Originally Posted by bayerischer

so just to get this straight, i dont want any programming or flashing the modules, only diagnosting my e92 335d, do i need sp date for that too, or is it just ok to download INPA 6.4.3 and 5.0.2 combination that i saw for download?

You will still need the DATEN files because that's what the software utilizes to communicate with your car. If using the coding tool, just click update NCS. You don't have to update WinKFP (which is used for flashing/programming).