[gurdz_tp]

Hi All,

I've LCI'd my front / rear lights on my e92 and upgraded to a MAX BROS FRM3 from a FRM2.

I coded the VO's (only had to add +MUEB) and all lights checked out fine (no errors).

When trying to lock / unlock the car, the visual alarm (indicators flashing) / alarm acoustics did not work. Tried unlocking, same thing, no sound/visual confirmation.

So i tried checking the codes over in the DWAI and NFRM modules, the codes were active. (same as when i had the frm2).

Along side that the welcome lights (angels, Front fogs) have been coded as "soft_einschalten", the angels flash twice then turn on (fog lights do not turn on at all). With the "hart_einschalten" option, the angel eyes turn on a 5-10 seconds after the cars unlocked and still no fogs.

Anyone experience this before?

Thank you

[gurdz_tp]

Just noticed that the frm3 isn't talking to the alarm system causing the hazards not to flash and the alarm acoustic not to churp.

Also noticed that my windows don't slide down / up a bit when opening and closing the doors.

[Dtype]

Did you code frm to default?

[gurdz_tp]

Originally Posted by Dtype

Did you code frm to default?

Hi, yeah deleted the contents of the TRC file, selected the NFRM and used the "SG_CODIREN" job.

[matteblue3er]

Originally Posted by gurdz_tp

Hi, yeah deleted the contents of the TRC file, selected the NFRM and used the "SG_CODIREN" job.

This is not how you default a module...