|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
OFHG Leak, Oil in Coolant reservoir
|
|
05-12-2017, 12:45 PM | #1 |
Lieutenant
76
Rep 590
Posts |
OFHG Leak, Oil in Coolant reservoir
In an interesting dilemma right now. I get mixed replies from who ever I ask this question. The car is sitting at 76xxx miles right now. Should I preemptively change out my water pump and thermostat?
My OFHG and VCG are leaking. So I will be replacing those 2 gaskets plus the oil filter cooler gasket, as well as doing all of my fluids. A lot of people tell me, if the water pump aint broke, don't fix it (ahead of time). Kind of nervous to see oil in the coolant reservoir. There has to be bits of the gasket circulating through which may cause the WP/Tstat to fail sooner than later. Thoughts? |
05-12-2017, 02:11 PM | #2 |
Captain
294
Rep 922
Posts |
Fix your gaskets, do an oil change and coolant flush, and drive it until your pump goes out. Then replace your pump and tstat together.
No need to replace the pump as preventative maintenance unless you frequently take long trips. Once the pump dies, it'll leave you stranded give or take 1/2 mile. Some people replace it early because they don't want to be stranded. Mine left me stranded on a beautiful saturday evening just 3 miles from my house. really was not a big deal at all. |
05-12-2017, 04:22 PM | #3 |
General of the Armies
162
Rep 661
Posts |
It is always cheaper to fix things you know will break before they actually break...because you can do it on your schedule, with non emergent labor, by purchasing parts at leisure from the most economical resource.
|
05-12-2017, 06:14 PM | #4 |
Lieutenant Colonel
422
Rep 1,643
Posts |
Like the guy above said, if you don't care about getting stranded then you can try to ride it out and take your chances.
Personally I would replace now to avoid being stranded.
__________________
2007 E92 335i MT
|
Appreciate
0
|
05-13-2017, 03:16 PM | #6 |
Captain
181
Rep 772
Posts
Drives: 2015 435i grand coupe xdrive
Join Date: Jan 2017
Location: Philadelphia, PA
|
It's known that parts of the oil filter housing gasket get in the coolant and eventually take out the water pump so yeah do the gasket and flush the system
|
Appreciate
0
|
06-07-2017, 02:28 AM | #7 |
Enemy of viscosity and thermal breakdown
142
Rep 285
Posts |
What he said. I waited and the waterpump went out a miles from home leaving me stranded with a long walk of shame. Now that I know these cars self destruct at 70K miles I would have definitely changed it earlier.
__________________
02' E46 S54 M3 6MT , Bilstein PSS10 B16, Ground Control Camber Plates, Dinan SSK, Apex FL-5, Eventuri Intake
RIP 09' E93 N54 6MT, Smarttop, Lux V5, JB4 G5 ISO, BMS DCI, Black ER CP, Tial BOV |
06-07-2017, 10:40 AM | #8 | |
Major
205
Rep 1,070
Posts |
Quote:
By the way, when doing OFHF, you may want to plan for top radiator over flow hose AND the smaller hose just beneath the OFH; that one broke when I was doing my OFHG, which I understand is common. Having all the parts available would have saved me a trip to the dealer in the middle of the work! Also, when doing the water pump and t-stat, it's a really good time to replace all the hoses connected there. They will cost an extra $150 MAYBE..
__________________
JWebb335xi
MHD / Wedge / 93 Octane/ xHP / FMIC / Inlets / Catted DPs / CP / DVs |
|
Appreciate
0
|
Yesterday, 11:19 AM | #10 |
New Member
5
Rep 11
Posts |
OFHG Leak - mild Nightmare
For those thinking about water pumps and OFHG leaks: DO IT NOW. Seriously.... My OFHG was seeping a VERY tiny amount externally... then disaster. 2 days ago my low oil light came on while sitting in traffic in a rain storm. My car never burns oil and only time it was low on oil was when the stud on the pan rusted off where oil level sensor is mounted (130k N52 2007 328i). I take a look this time - and over a quart of oil went into my coolant system - and that was too much volume so it blew oily coolant out of the expansion tank. What a mess. This OFH gasket was only about 60k old. It was a nightmare because the OFH bolt head under the manifold got munged - I had to pull the intake manifold to get a straight shot and extract - also purging the cooling system of all oil is a HUGE pain. Also, my last waterpump lasted only 53k (BMW branded!). I replaced with Pierburg OEM. You will always snap off the little fittings and the upper radiator hose doing this by the way, so have one on hand. Just a little friendly advice, pictures below...look at that gasket! And that bucket of yuck is my antifreeze drained.
|
Appreciate
0
|
Yesterday, 05:00 PM | #11 | |
Colonel
669
Rep 2,078
Posts |
Quote:
So the 5 series have a 200kPa coolant cap instead of the 140kPa on the 335...so that didnt help the coolant tank... OFHG was probably chgd by previous owner and I chalked it out to a low grade gasket...very critical component. The mess...also had a bucket like yours. In my case, i think may be 4 ltrs oil leaked to the coolant.
__________________
335i e92 TPC 19Ts
|
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|