[NBTBRV8]

Anybody done it, it looks to be straight forward. Any other tips?

[PerthBMW]

Hi

I tried it on my 2010 comfort access key and it sure isn't as easy to get off as it is shown in this video. Upon refection, I'm wondering if they have heated it up to melt the glue?

I ended up just sticking the new emblem over the old and looks mint. You do run a very BIG risk of damaging the key doing as they have suggested - proceed at your own risk I say.

[EB89]

I did it, it's easy.

I stabbed the old one with a knife and tore it off.

Then stuck the new one down

[Socket]

Highly technical and hard core procedure. Should only be attempted by a professional

[Pete.J]

Yup done it before a few times on my key and friends' keys, pretty easy imo.

BMW sells genuine key emblems, make sure you don't fall for the cheap Chinese emblems you find on eBay for $2. They fade and look like shit again in no time!

The part no. for the genuine emblem: 66122155754

You can find it on eBay for about $12, link:
http://www.ebay.com.au/itm/GENUINE-O...gAAOSwo4pYEye4

[NBTBRV8]

Originally Posted by Serial Driver

Yup done it before a few times on my key and friends' keys, pretty easy imo.

BMW sells genuine key emblems, make sure you don't fall for the cheap Chinese emblems you find on eBay for $2. They fade and look like shit again in no time!

The part no. for the genuine emblem: 66122155754

You can find it on eBay for about $12, link:
http://www.ebay.com.au/itm/GENUINE-O...gAAOSwo4pYEye4

So the process is as per the video then? No tricks/tips?

[Desertraptor]

I bought mine off ebay