looking for: 330i auto 3.64 differential

bo-vice · 11-19-2018, 12:52 PM

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

as the title says..

looking to swap into my manual car for a bit more pep with the more aggressive gearing!

thanks,

jpy97ggg · 12-08-2018, 03:30 PM

Quote:

Originally Posted by bo-vice

as the title says..

looking to swap into my manual car for a bit more pep with the more aggressive gearing!

thanks,

Would you do a 328i auto 3.73 diff ?

Jimsbim · 12-08-2018, 03:52 PM

Bo-vice, be mindful of the flange configuration once you locate a diff. A few years ago I picked up an auto 3.64 diff for my 2012 328 Msport manual. If I recall the diff had a triangular flange, the car's drive shaft flange is round. The bolt holes did not line up. A round flange for the diff is not available as a single part from BMW. Fortunately my indy had a spare round flange laying around and was able to swap it into the diff. All good. The torque increase is definatly noticeable and you will love it!

11-19-2018, 12:52 PM	#1
bo-vice New Member 0 Rep 7 Posts Drives: 2006 330i 6spd Join Date: Jul 2018 Location: vancouver iTrader: (0)	looking for: 330i auto 3.64 differential BIMMERPOST / Classifieds Asking Price: None Item Interest as the title says.. looking to swap into my manual car for a bit more pep with the more aggressive gearing! thanks,
	Appreciate 0 Tweet Quote

12-08-2018, 03:52 PM	#3
Jimsbim Private 20 Rep 66 Posts Drives: 1988 E28 M5 Join Date: Oct 2016 Location: PA iTrader: (0)	Bo-vice, be mindful of the flange configuration once you locate a diff. A few years ago I picked up an auto 3.64 diff for my 2012 328 Msport manual. If I recall the diff had a triangular flange, the car's drive shaft flange is round. The bolt holes did not line up. A round flange for the diff is not available as a single part from BMW. Fortunately my indy had a spare round flange laying around and was able to swap it into the diff. All good. The torque increase is definatly noticeable and you will love it!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search