|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Thinking about spacers...
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
07-11-2008, 12:58 PM | #1 |
Captain
73
Rep 945
Posts |
Thinking about spacers...
Thinking about some spacers on the rear wheels. I went from the stock 162 wheels on the sedan with 8.5" width and ET 37 to a 9" wheel with ET 35. What about 10mm spacers. Will this be OK? Using the calculator tool it says there will be 18mm less clearance from stock which doesn't seem too much.
|
07-11-2008, 01:40 PM | #2 |
Brigadier General
740
Rep 3,732
Posts |
Look at my thread...
I stuffed an 18mm spacer on an E92 which has less clearance than your E90. You can fit a wider spacer than 10mm IMO. Don't be scared, do the math and go forward.
__________________
BMW PERFORMANCE SPECIALISTS. Race Engines. Suspension. F/I. Brakes. Race Preparation. Factory Service. Alignments.
OFFICIAL PARTNERS: KW. MOTON. Brembo. AP Racing. BBS Motorsport. iND. HRE. Turner Motorsport. VAC. BMW Motorsport. Facebook | Instagram | Yelp! | Flikr Phone: 949-233-0448 | E-Mail: info@mrfengineering.com |
Appreciate
0
|
07-11-2008, 02:27 PM | #3 |
Captain
28
Rep 946
Posts |
Mine are ET35 9.5" rim and I just added 10mil spacers, no problems and it looks great! DO IT!
__________________
Last edited by 02themax; 07-11-2008 at 02:46 PM.. |
Appreciate
0
|
07-11-2008, 02:37 PM | #4 |
Captain
29
Rep 670
Posts |
I have rear ET40mm 9.5" with 10mm spacers. I think I could have gone 15mm with no problems...however, it looks good so I'm sticking with it. I may have to do minor fender rolling when I lower. You should be fine with 15mm spacers, fender rolling may be required.
|
Appreciate
0
|
07-11-2008, 07:58 PM | #5 | |
Banned
485
Rep 13,582
Posts
Drives: JB E92 335i
Join Date: Feb 2008
Location: 1721 E. Lambert Rd #C, La Habra, CA 90631
|
Quote:
For the 18x9 with ET35, you can definitely use 10mm spacers in the rear. It should fit just right--I believe I've heard some people go with 12mm spacers and be just fine, but I think 10mm is the way to go. |
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|