JB3 Beta PNP

RiXst3r · 07-28-2008, 04:25 PM

install was super easy... just access the ecu compartment as always, slide out the 4 oem connectors, slide in the jb3 connectors, and then plug the stock connectors into the jb3 harness... DONE! Only tool I used was a socket wrench to remove the covers to get to the ecu... and then I used a tiny screwdriver to release clips to slide out the 4 subconnectors.

enjoy!

07-28-2008, 04:35 PM

wow!!!!

stillclaimndp · 07-28-2008, 04:38 PM

Quote:

Originally Posted by GAMEOVR

wow!!!!

wouldn't this comment be reserved for innovation? this has been available on procede v3 for months now...

07-28-2008, 04:39 PM

Quote:

Originally Posted by stillclaimndp

wouldn't this comment be reserved for innovation? this has been available on procede v3 for months now...

Could careless about PNP

. or the whole Procede thing...... Customer service over power.

hotrod182 · 07-28-2008, 04:39 PM

I took this picture yesterday. Pretty neat and tidy with an easy install.

RiXst3r · 07-28-2008, 04:42 PM

awesome hotrod182!! ... the jb3 unit itself is so tiny, and the harness is so simple with no extra hardware other than the little mapswitch dongle, it makes for a very CLEAN install.

-Rick

vegasspeed · 07-28-2008, 04:45 PM

that looks like the back of a TV/stereo setup. That scares the shite out of me just looking at that.

RiXst3r · 07-28-2008, 04:48 PM

Quote:

Originally Posted by vegasspeed

that looks like the back of a TV/stereo setup. That scares the shite out of me just looking at that.

lol... its pretty easy... there might be hundreds of wires... but there is only 4 connectors to deal with!

BMW_TT · 07-28-2008, 04:50 PM

Quote:

Originally Posted by vegasspeed

that looks like the back of a TV/stereo setup. That scares the shite out of me just looking at that.

It's not so bad once you mess with the wiring. If you had the old JB1 or JB2 setup, you'll appreciate the PNP.

hun77777 · 07-28-2008, 04:58 PM

are these 4 connectors you were speaking of?

RiXst3r · 07-28-2008, 04:59 PM

Quote:

Originally Posted by hun77777

are these 4 connectors you were speaking of?

Yep, those are the ONLY connections... male and female ends for each.

scottp999 · 07-28-2008, 05:08 PM

Looks like a nice setup. Any pictures of what the final hardware unit will look like?

RiXst3r · 07-28-2008, 05:11 PM

Quote:

Originally Posted by scottp999

Looks like a nice setup. Any pictures of what the final hardware unit will look like?

the production version will have matched wire bundle tape like OEM.

mmmotornutz · 07-28-2008, 05:35 PM

Quote:

Originally Posted by stillclaimndp

wouldn't this comment be reserved for innovation? this has been available on procede v3 for months now...

True but the V3 harness is a bit "messy."

lawdude · 07-28-2008, 05:47 PM

Novel idea - Vishnu people let the BMS people have their fun in their threads and vice versa.

Hunter399 · 07-28-2008, 06:00 PM

Nice!

Panoz · 07-28-2008, 06:09 PM

Quote:

Originally Posted by lawdude

Novel idea - Vishnu people let the BMS people have their fun in their threads and vice versa.

LOL...

As I'm fun of both ,may I express my opinion?

I have not yet tested the JB3 but I'm impressed from the "compact" size of the PnP and device. It looks pretty tidy into the ECU compartment.

V3 is an impressive tune in terms of performance & stability BUT the harness is extremely big for the ECU compartment. The Processor still fits perfectly into the compartment's "slot" but the cables are too many and once the install is done, the whole "box" is looking like a real mess. I could barely seal the compartment at the end.

In any case, good job to both tuners , I trust that they deliver 1st quality products.

e90AW335i · 07-28-2008, 06:11 PM

Quote:

Originally Posted by lawdude

Novel idea - Vishnu people let the BMS people have their fun in their threads and vice versa.

uberschnell · 07-28-2008, 10:11 PM

Quote:

Originally Posted by stillclaimndp

wouldn't this comment be reserved for innovation? this has been available on procede v3 for months now...

OK, how about WOW the price! or Wow the upgrade policy! or Wow the service!

bolinp78 · 07-28-2008, 10:40 PM

Quote:

Originally Posted by Magna3

OK, how about WOW the price! or Wow the upgrade policy! or Wow the service!

So what is the price expected to be?

I know this is somewhere else but since the thread is already here, might as well ask

normtrum · 07-28-2008, 10:47 PM

Quote:

Originally Posted by Magna3

OK, how about WOW the price! or Wow the upgrade policy! or Wow the service!

lol!

The "3" looks good....nice and clean.

ezatnova · 07-29-2008, 12:55 PM

Good work!

07-28-2008, 04:25 PM	#1
RiXst3r 288 Rep 6,510 Posts Drives: M235i Join Date: Sep 2006 Location: Ohio iTrader: (14)	JB3 Beta PNP - my install photos install was super easy... just access the ecu compartment as always, slide out the 4 oem connectors, slide in the jb3 connectors, and then plug the stock connectors into the jb3 harness... DONE! Only tool I used was a socket wrench to remove the covers to get to the ecu... and then I used a tiny screwdriver to release clips to slide out the 4 subconnectors. enjoy! Attached Images
	Appreciate 0 Tweet Quote

07-28-2008, 04:35 PM	#2
amazzzin Guest 0 Rep n/a Posts Drives:	wow!!!!
	Appreciate 0 Quote

07-28-2008, 04:39 PM	#5
hotrod182 . 878 Rep 3,994 Posts Drives: 2023 i4 M50 Join Date: Dec 2006 Location: California iTrader: (0)	I took this picture yesterday. Pretty neat and tidy with an easy install. Attached Images __________________ 2011 Alpine 335d M-Sport 12.34 @ 110.48mph 2019 i3s Terra, 2008 Black 335i Sedan. 11.11@ 129.47 mph 2008 Monaco Blue JB3 2.0 335i Coupe. 11.33 @ 132.77 mph, 60-130mph: 6.95 seconds 2023 i4 M50 11.48 @ 121.56mph, 3.43 0-60 (dragy)
	Appreciate 0 Quote

07-28-2008, 04:42 PM	#6
RiXst3r 288 Rep 6,510 Posts Drives: M235i Join Date: Sep 2006 Location: Ohio iTrader: (14)	awesome hotrod182!! ... the jb3 unit itself is so tiny, and the harness is so simple with no extra hardware other than the little mapswitch dongle, it makes for a very CLEAN install. -Rick
	Appreciate 0 Quote

07-28-2008, 04:45 PM	#7
vegasspeed Captain 84 Rep 761 Posts Drives: 335i 6MT coupe Montego Blue Join Date: Apr 2008 Location: Las Vegas iTrader: (1)	that looks like the back of a TV/stereo setup. That scares the shite out of me just looking at that. __________________ 335i coupe Montego Blue Dinan stage 3 tune, Advan RS wheels 350whp/365wtq 1994 Brooklands Green Acura NSX Comptech Supercharged 390whp/300wtq
	Appreciate 0 Quote

07-28-2008, 04:58 PM	#10
hun77777 Brigadier General 199 Rep 4,646 Posts Drives: SG E92 Join Date: Nov 2007 Location: Seattle WA iTrader: (58)	are these 4 connectors you were speaking of?
	Appreciate 0 Quote

07-28-2008, 05:08 PM	#12
scottp999 Brigadier General 136 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	Looks like a nice setup. Any pictures of what the final hardware unit will look like?
	Appreciate 0 Quote

07-28-2008, 05:47 PM	#15
lawdude Colonel 95 Rep 2,339 Posts Drives: 335i ZPP ZSP TiAg MT Join Date: Jul 2006 Location: Georgia iTrader: (1)	Novel idea - Vishnu people let the BMS people have their fun in their threads and vice versa.
	Appreciate 0 Quote

07-28-2008, 06:00 PM	#16
Hunter399 Major General 336 Rep 8,088 Posts Drives: F90M5 Join Date: Apr 2005 Location: Houston, TX iTrader: (33)	Nice!
	Appreciate 0 Quote

07-29-2008, 12:55 PM	#22
ezatnova Power and Speed 105 Rep 2,197 Posts Drives: ‘22 Shelby GT500, ‘25 X5 50e, '21 Tacoma TRD OR Join Date: Jan 2006 Location: West Chester, PA iTrader: (5)	Good work!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search