|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
 |
|
BMW 3-Series (E90 E92) Forum
>
Single Turbo Install, Aiming The Dump Pipes
|
 |
| 09-13-2019, 09:18 AM | #1 |
|
Enlisted Member
 15
Rep 43
Posts
Drives: 2007 E92 335i 6MT
Join Date: Jan 2017
Location: MA
|
Single Turbo Install, Aiming The Dump Pipes
I'm installing a JPworkz kit with a Borg Warner S366, everything fits ok I'm just not sure where to point the dump pipes.
Last edited by Genhero; 06-06-2020 at 11:05 AM.. |
| 09-13-2019, 09:33 AM | #2 |
|
Major
 
779
Rep 1,436
Posts
Drives: 335is
Join Date: Apr 2017
Location: MI
|
What about out the side or hood? Might have to do some cutting but anyplace else I am not sure. Seems like something is going to melt if you don't get them out of the bay.
__________________
2011 335is DCT BQ Tuning / BMS CAI / VRSF kittyless DP's / Synapse BOV and charge pipe / 7" VRSF Race FMIC / Walbro 535 and 450 on BMP4 / E90 tune / Diff Brace / PR Coils / Relocation Inlets / DAW Stage3+ Turbos / MMP port injection / xHP Stage 3 / FPR and -6 fuel lines
|
|
Appreciate
0
|
| 09-13-2019, 03:59 PM | #3 |
|
Enlisted Member
15
Rep 43
Posts
Drives: 2007 E92 335i 6MT
Join Date: Jan 2017
Location: MA
|
To be clear, these are the little dump pipes that come off the wastegate and not the downpipe. These kits are meant to dump down I'm just not sure the correct angle.
|
|
Appreciate
0
|
| 09-19-2019, 12:38 PM | #5 |
|
Captain
 203
Rep 665
Posts |
They shoot hot exhaust and potentially flames out, don't aim them at anything.
__________________
17 M3 Comp
|
|
Appreciate
1
Antetokounmpo1559.50 |
| 11-14-2019, 09:04 AM | #7 | ||
|
Enlisted Member
15
Rep 43
Posts
Drives: 2007 E92 335i 6MT
Join Date: Jan 2017
Location: MA
|
Quote:
Quote:
I just finished everything except for the dump tubes and the turbo. I'll have to figure it out this weekend. |
||
|
Appreciate
0
|
| 11-14-2019, 09:59 AM | #8 |
|
Slow.
3808
Rep 7,150
Posts
Drives: N54 6466 100% E85 + Meth
Join Date: Jun 2012
Location: Boston, MA
|
The joy of working with jp works!
As Milan said don't point them at anything you don't want melted etc. https://www.n54tech.com/forums/attac...1&d=1448748768 There are pictures online of how people aim them. My guess is you have to point them at your MM. Hope it does not melt. Make a heat shield? |
|
Appreciate
0
|
| 11-14-2019, 10:11 AM | #9 | |
|
Enlisted Member
15
Rep 43
Posts
Drives: 2007 E92 335i 6MT
Join Date: Jan 2017
Location: MA
|
Quote:
That picture helps, thanks. I could only find pictures from the top with the turbo in the way. I felt like everywhere I pointed it, it would glance the motor mount or subframe. I'll give that position a try when I get home. |
|
|
Appreciate
0
|
 |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
