[One35Vert]

So everything is new i could not for the life of me figure why I was getting a misfire after one whole week turning it off and on trying to diagnose the problem I finally decided to remove the coils one by one to investigate finally found out that that last cylinder to the back was not working mind you these are new coils new spark plugs i took out the spark plug and noticed it had been unburnt this whole time then I decided to swap them out to see if there was any difference but no the same thing so its not working at all no matter what I throw in there what can this possibly mean? And yes I swapped injectors same thing. Is it possible its an electrical issue? The cables look fine but I can be wrong...? Please help if you have any thoughts 🙏 I googling this issue has not been easy as its main response is change everything which in my case will not make a difference.

[lookalikehuuh]

have you done a compression test on that cyl vs the other cylinders?

[Soden82]

Should go new coils-> new spark plugs-> new injectors-> compression test