|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Key symbol on dash no crank no start
|
|
10-06-2020, 06:48 PM | #1 |
Registered
0
Rep 3
Posts |
Key symbol on dash no crank no start
SALUTATIONS
I have a bmw 328xi 07 automatic sedan In April I went into the BMW dealership in Hartford Connecticut the factory recalls we're done in the meantime I asked for a Diagnostics that was never done upon recommendation on BMW service provider I knew a new insert a new cas module was installed Then a few days later BMW service provider called me and says all the parts were installed for the ke &y the new key was stuck inside the insert I had to pay 1300 plus 250$ for toe smh So having a few mechanics look @ it this was done so far & still no crank no start Things tested & done 1] check battery 2] switch battery switch new 3]checked starter switch starter checked all the fuses all of Grouned 4]check all the relays all are good 5] check power to the starter got power going to the starter 6]check ground to the starter got ground 7]check the ignition wire to the starter no power to the crank check battery 8] wires for voltage got power and both wires battery voltage is good 9]change three broken hoses change 2 THAT WERE FACTORY RECALLS FROM DEALERSHIP 10]New the serpentine belt 11] clean the engine ground got power to the engine engine grounding 12]checked all the connectors electronic connectors 13]check engine relay good 14] try to start the car neutral didn't work 15]disconnected & connected IBS try to start it nothing happens BMW dealership installed parts 2 factory recalls blower PVC New key New key fob New insert New cas module LIKE 2K FOR NOTHING CAN SOMEONE HELP OR POINT ME IN THE RIGHT DIRECTION thank you 2038199013 or only1pain@yahoo.com |
Bookmarks |
Tags |
key symbol on dash, keyfob, no crank no start |
Thread Tools | Search this Thread |
|
|