[mizta insane]

Hello,

I have a customer with Custom headlights and they wanted to code out low beam bulb warning.

I've disable hot and cold check but I'm still getting check control message for Low beam Left and Right.

I don't see a way to disable check control message.

Attach is the trace from frm, any help me would be appreciated.


Frm is NFRM (FRM3.C32)

[Tunafish]

Cant view but check to see if cc_abblendlicht is set to nicht_aktiv .. Should be low beam check control.

This might be in thw kombi module btw.. I will check to see if i can find it later.

[mizta insane]

Originally Posted by Tunafish

Cant view but check to see if cc_abblendlicht is set to nicht_aktiv .. Should be low beam check control.

This might be in thw kombi module btw.. I will check to see if i can find it later.

just check both frm and kombi for that found nothing.

I see this in frm (see picture) but it makes no difference if I select wert1

[Tunafish]

I know that the error sometimes take a while to clear even when coded, I would run it for a week and see if it goes away.