[MyN52willBEATyou]

[FONT="Tahoma"]———————
Accident info:

I was in a pretty bad accident on august 19, the insurance deemed it was my fault and I did not have full coverage although I hit the just just slightly but his for F-250 Quad Cab Super duty with the tool boxes in the back.
Whoever’s fault it was the cars were clipped and my car being the smaller lighter one got spun in a 270 degree impact and I was hurt anyways.

——————-
My cars info:


I fixed the curtain side air bags on both sides. I got the head liner repaired where it was slightly damaged by the side curtain air bags.


——————-
The good

replacement headlight
replacement front fender (small dent)
replacement front bumper(smal cracks)
Silver-354 matching paint to fix damage to bumper
Clean car inside and out


————————
The bad

The car is having an electrical issues that occurred before the accident.

It stated with the windows front and sometimes back not working, then the central locks on the key fob and dash worked.


I did I some research and determined it was the junction box/JBE H1

No windshield wipers
No central locking
No A/C at all- sometimes heater only
No windows only passenger front
No parking brake off switch


I’m sure the junction box is operating many other things as well buts what I know
Of.

I bought a exact replacement unit in eBay

Same serial and part number
Same build a date and location
All the information on the second part I bought on eBay is identical and no other junction box I have found has even had part numbers close.


Please help me a regular ODBII sensor powered(only after plugging in replacer JBE but it will no read codes. Maybe with ISTA or INPA D

I have a K+D can usb cable and Ista and inpa d but I’m worried I won’t get any readings besides the same error. Codes from odb2