[warlockuy]

After updating with winkfp
I have some errors that I have not been able to solve, one seems serious to me but it is not.
I had several since I updated several modules, but I was not solving these two.
I attach images with the ista and inpa data

Mistake
EGS: 00511B Coding was Faulty
It does not show problems when walking or alerts on the screen.

DME 002FA3 DME not yet coded.
The same if there are problems, they are not noticeable when walking.

I leave the images attached.
If you can help me, I thank you.

I tried updating the EGS again, it tells me that it cannot be done.

Very very thanks

[sdbmwcoding]

Code the EGS and DME module in ncs expert and errors will go away. Winkfp does not touch coding, just programming/flash

[warlockuy]

Originally Posted by sd*********

Code the EGS and DME module in ncs expert and errors will go away. Winkfp does not touch coding, just programming/flash

hi
SG_CODIEREN only ? or first SG_RESET ?
Very very thanks

[sdbmwcoding]

Originally Posted by warlockuy

hi
SG_CODIEREN only ? or first SG_RESET ?
Very very thanks

Sg_codieren

Sg_reset will only turn the module off and back on, not code it

[warlockuy]

Originally Posted by sd*********

Sg_codieren

Sg_reset will only turn the module off and back on, not code it

WORKssssssss
very very thanks
No errors
Thanks

[sdbmwcoding]

Originally Posted by warlockuy

WORKssssssss
very very thanks
No errors
Thanks

You’re welcome