Injen Intake Review

Slickrat · 03-19-2009, 06:47 PM

I purchased the Injen Dual Cone Intake from BOBBY@BAVARIANX.COM, about 3 weeks ago. I had installed it as soon as I got it.

I can say absoloutly nothing negative about this product.

-STRONG POINTS

-EASY INSTALLATION- (Took About 30-45 min(if you are good w/ tools)

-HI GRADE HARDWARE- (Matches all threads where stock holes are)

-CLEAN INSTALL- (No drilling cutting)

-GREAT SOUND- (YOU CAN HEAR THE RECIRCULATING VALVES) WOOSH!

-WARRANTY- FULL WARRANTY THROUGH INJEN(on what? I dnt know,filters?)

-I cannot say enough about the quality and sound of this intake..

I am posting pictures soon as soon as my comp stops freezing.. Good stuff Worth Every $$

PS: 14 WHP Gain On a DynoDynamics dyno...proven by me!!

Cloud9blue · 03-19-2009, 07:13 PM

ok.

TheAcAvenger · 03-19-2009, 07:49 PM

Hmmm, it's good to see the gains are there. It looks beautiful. If I were buying my first intake, i'd consider it. Congrats

Oh, and it's generally easier to put your mods in your sig than above your avatar. I'm just saying

Slickrat · 03-19-2009, 08:26 PM

Slickrat · 03-19-2009, 08:38 PM

vacuum line and wire tabs

power steering relocation

stock mount stabalizer bracket

bubbletea 4 me · 03-19-2009, 08:47 PM

nice but from the sound of things, the sound and performance looks to be the same as pretty much any other DCI. it's an expensive piece but it does look real nice.

Slickrat · 03-19-2009, 08:52 PM

Definatly worth every penny to me, it looks awesome and brings out the hidden sound of the turbo's. If you are using the car as a daily driver I would strongly recommend the hydro covers for the filters!

RyBMW · 03-19-2009, 11:30 PM

I like.

How do you clean those filters?

Proper Motion LLC · 03-19-2009, 11:36 PM

Quote:

Originally Posted by RyBMW

I like.

How do you clean those filters?

iPodAddict · 03-20-2009, 02:15 AM

Quote:

Originally Posted by Slickrat

I purchased the Injen Dual Cone Intake from BOBBY@BAVARIANX.COM, about 3 weeks ago. I had installed it as soon as I got it.

I can say absoloutly nothing negative about this product.

-STRONG POINTS

-EASY INSTALLATION- (Took About 30-45 min(if you are good w/ tools)

-HI GRADE HARDWARE- (Matches all threads where stock holes are)

-CLEAN INSTALL- (No drilling cutting)

-GREAT SOUND- (YOU CAN HEAR THE RECIRCULATING VALVES) WOOSH!

-WARRANTY- FULL WARRANTY THROUGH INJEN(on what? I dnt know,filters?)

-I cannot say enough about the quality and sound of this intake..

I am posting pictures soon as soon as my comp stops freezing.. Good stuff Worth Every $$

PS: 14 WHP Gain On a DynoDynamics dyno...proven by me!!

I recently got mine and installed it as well.

However I will have to disagree with the "easy installation" part... the install document that comes with the intake has to be the worst documentation I have ever followed.

I could have made something with a lot less pages and pictures printed and STILL be far easier to follow.

Also the metal bracket you're supposed to support the stock power-steering pump line with as well as the intake pipe connection joint (with the rubber / vibration eliminator piece)... the stock screw/washer that is supposed to be on the left side (closest to the front of the car) would not have enough threads to catch on. I had to grind down that metal piece (L bracket part) that goes against the shock tower between the power steering pump line bracket.

Took me all in all about 2 hours to do it. If I was going to re-do it again, it would take probably 20 minutes now knowing what needs to be done to make things as smooth sailing as possible.

twinturboa51 · 03-20-2009, 09:16 AM

looks good. i think im going to be buying it soon. can you hear the "whoosh" inside with the windows closed???

uuni · 03-20-2009, 01:59 PM

Quote:

Originally Posted by twinturboa51

looks good. i think im going to be buying it soon. can you hear the "whoosh" inside with the windows closed???

I can hear at least with my BMS DCI.

This injen looks nice but it's too expensive, like 4 times more expensive than BMS.

Ramos · 03-20-2009, 03:06 PM

Quote:

Originally Posted by Slickrat

Definatly worth every penny to me, it looks awesome and brings out the hidden sound of the turbo's. If you are using the car as a daily driver I would strongly recommend the hydro covers for the filters!

Hey man,

I have the same intake (also red on red) can you tell me what hydro covers you are referring to?

akira42 · 03-20-2009, 04:03 PM

Any plans on doing this? A new DIY guide for the intakes that is.

Quote:

Originally Posted by iPodAddict

I recently got mine and installed it as well.

However I will have to disagree with the "easy installation" part... the install document that comes with the intake has to be the worst documentation I have ever followed.

I could have made something with a lot less pages and pictures printed and STILL be far easier to follow.

Also the metal bracket you're supposed to support the stock power-steering pump line with as well as the intake pipe connection joint (with the rubber / vibration eliminator piece)... the stock screw/washer that is supposed to be on the left side (closest to the front of the car) would not have enough threads to catch on. I had to grind down that metal piece (L bracket part) that goes against the shock tower between the power steering pump line bracket.

Took me all in all about 2 hours to do it. If I was going to re-do it again, it would take probably 20 minutes now knowing what needs to be done to make things as smooth sailing as possible.

akira42 · 03-20-2009, 04:03 PM

Do you have any pics? I have crimson red, and was definately thinking about getting this, but before i spend and additional $300 just for cosmetic reasons, i wanted to make sure it looks right.

Quote:

Originally Posted by Ramos

Hey man,

I have the same intake (also red on red) can you tell me what hydro covers you are referring to?

Ramos · 03-20-2009, 05:22 PM

Quote:

Originally Posted by akira42

Do you have any pics? I have crimson red, and was definately thinking about getting this, but before i spend and additional $300 just for cosmetic reasons, i wanted to make sure it looks right.

No man, red on red means red tubing with red filters.. My car is Alpine White like the OP..
Not sure how the red intake would look next to your crison red suspension tower

Here are my pics in case you want to see:
http://www.e90post.com/forums/showthread.php?t=238612

Slickrat · 03-20-2009, 05:31 PM

Quote:

Originally Posted by Ramos

Hey man,

I have the same intake (also red on red) can you tell me what hydro covers you are referring to?

They sell INJEN HYDRO COVERS for the filters...its a pre-filter that "repels" water and keeps out the sand/smaller particles.. they are like 25.00 a piece I ordered mine last week....

Slickrat · 03-20-2009, 05:33 PM

Quote:

Originally Posted by twinturboa51

looks good. i think im going to be buying it soon. can you hear the "whoosh" inside with the windows closed???

Yeaa you hear it clear with the windows closed and the music off lol...Its loud outside the car...Seriously I had a srt-4 with the the TIAL 48mm BOV and it was so loud...I got this car and there was NOTHING!! I am so much more happy now..you will be too

Slickrat · 03-20-2009, 05:34 PM

Quote:

Originally Posted by akira42

Any plans on doing this? A new DIY guide for the intakes that is.

It comes with Directions...And they are not that bad as long as you can read and have played with Kenex or Lego's when you were a kid

Ramos · 03-20-2009, 05:34 PM

Thanks.. Funny Bobby never mentioned those... Guess I won't need them until next winter anyway...

By the way, I went through a no touch automatic car wash and the filters were completely dry after

akira42 · 03-20-2009, 05:36 PM

That's what i'm worried about either the red intake will make it look awesome, or it will make it looks terrible. I doubt there is in in between.

Quote:

Originally Posted by Ramos

No man, red on red means red tubing with red filters.. My car is Alpine White like the OP..
Not sure how the red intake would look next to your crison red suspension tower

Here are my pics in case you want to see:
http://www.e90post.com/forums/showthread.php?t=238612

Ramos · 03-20-2009, 05:38 PM

Quote:

Originally Posted by akira42

That's what i'm worried about either the red intake will make it look awesome, or it will make it looks terrible. I doubt there is in in between.

Hey you are local, go see Bavarian, and have them show you the different colors in person next to your engine bay and then you can chose.
They have black, polished and red for the tubing
and blue or red for the filters..
You can chose any combination and they hooked me up with the install as well...

Good luck

03-19-2009, 06:47 PM	#1
Slickrat Injen intake,DINAN s2,BBS-LM,Led int,KW-V2, + More 32 Rep 169 Posts Drives: 09,335i,alpine,bbs-lm,kw-v2,++ Join Date: Dec 2008 Location: LONG ISLAND, NY iTrader: (1)	Injen Intake Review I purchased the Injen Dual Cone Intake from BOBBY@BAVARIANX.COM, about 3 weeks ago. I had installed it as soon as I got it. I can say absoloutly nothing negative about this product. -STRONG POINTS -EASY INSTALLATION- (Took About 30-45 min(if you are good w/ tools) -HI GRADE HARDWARE- (Matches all threads where stock holes are) -CLEAN INSTALL- (No drilling cutting) -GREAT SOUND- (YOU CAN HEAR THE RECIRCULATING VALVES) WOOSH! -WARRANTY- FULL WARRANTY THROUGH INJEN(on what? I dnt know,filters?) -I cannot say enough about the quality and sound of this intake.. I am posting pictures soon as soon as my comp stops freezing.. Good stuff Worth Every $$ PS: 14 WHP Gain On a DynoDynamics dyno...proven by me!!
	Appreciate 0 Tweet Quote

03-19-2009, 07:13 PM	#2
Cloud9blue Brigadier General 717 Rep 3,251 Posts Drives: around the potholes Join Date: Aug 2008 Location: NY/NJ/MA iTrader: (13)	ok. __________________ 09 BMW E92 335i: Top Mount EFR 7670 / Dinan / AP Racing / Wavetrac / TC Kline [Full Mod List] 07 BMW R1200S: Shine Yellow / Akrapovic / Ohlins 19 Volvo V90 T6: R-Design / Bowers & Wilkins / Polestar Optimization
	Appreciate 0 Quote

03-19-2009, 07:49 PM	#3
TheAcAvenger Brigadier General 137 Rep 3,132 Posts Drives: 2018 R35 GTR / 2007 E92 335i Join Date: Apr 2006 Location: 757 > Nova > Denver iTrader: (1)	Hmmm, it's good to see the gains are there. It looks beautiful. If I were buying my first intake, i'd consider it. Congrats Oh, and it's generally easier to put your mods in your sig than above your avatar. I'm just saying __________________ 2018 R35 GT-R Cicio800 \| 2007 E92 335i - RB Turbos, TC Kline DA Coils, HPA M3 Suspension, Quaife LSD, Stoptech BBK, JB4, FuelIT, AR Downpipes, RDSport Quads, Stett OC, Helix IC, Volk TE-37, Vorsteiner V-35, OSS Headlights \| Retired - 2015 F82 M4
	Appreciate 0 Quote

03-19-2009, 08:26 PM	#4
Slickrat Injen intake,DINAN s2,BBS-LM,Led int,KW-V2, + More 32 Rep 169 Posts Drives: 09,335i,alpine,bbs-lm,kw-v2,++ Join Date: Dec 2008 Location: LONG ISLAND, NY iTrader: (1)	Ingen Intake Pics
	Appreciate 0 Quote

03-19-2009, 08:38 PM	#5
Slickrat Injen intake,DINAN s2,BBS-LM,Led int,KW-V2, + More 32 Rep 169 Posts Drives: 09,335i,alpine,bbs-lm,kw-v2,++ Join Date: Dec 2008 Location: LONG ISLAND, NY iTrader: (1)	More Injen Intake Pics/ vacuum line and wire tabs power steering relocation stock mount stabalizer bracket
	Appreciate 0 Quote

03-19-2009, 08:47 PM	#6
bubbletea 4 me Lieutenant Colonel 63 Rep 1,914 Posts Drives: Finally here Join Date: Dec 2007 Location: Earth iTrader: (5)	nice but from the sound of things, the sound and performance looks to be the same as pretty much any other DCI. it's an expensive piece but it does look real nice.
	Appreciate 0 Quote

03-19-2009, 08:52 PM	#7
Slickrat Injen intake,DINAN s2,BBS-LM,Led int,KW-V2, + More 32 Rep 169 Posts Drives: 09,335i,alpine,bbs-lm,kw-v2,++ Join Date: Dec 2008 Location: LONG ISLAND, NY iTrader: (1)	Definatly worth every penny to me, it looks awesome and brings out the hidden sound of the turbo's. If you are using the car as a daily driver I would strongly recommend the hydro covers for the filters! __________________ 19'' BBS-LM,KW-V2 Coilovers, M-Tech Lip Spoiler, Luminics Fog Bulbs (Yellow), Red Emblems, LED Interior Kit White, 3M Clear Nose Bra, Injen Intake, DINAN S2 Software, DINAN Exhaust, Painted kidney grilles, Black Mesh Grilles
	Appreciate 0 Quote

03-19-2009, 11:30 PM	#8
RyBMW Major 80 Rep 1,038 Posts Drives: X5 Join Date: Jun 2005 Location: NYC iTrader: (1) Garage List 2012 BMW X5 [0.00] 2008 335i [0.00]	I like. How do you clean those filters? __________________ New: 12 X5 xDrive35i Premium Alpine White/Cinn Brown Old: 08 E92 335i\|Space Gray/Coral Red/Gray Poplar Old: 06 E90 330i\|Black Sapphire/Black /Burl
	Appreciate 0 Quote

03-20-2009, 09:16 AM	#11
twinturboa51 Captain 20 Rep 637 Posts Drives: Mineral Grey F80 M3 Join Date: Feb 2009 Location: Boston iTrader: (0)	looks good. i think im going to be buying it soon. can you hear the "whoosh" inside with the windows closed??? __________________
	Appreciate 0 Quote

03-20-2009, 05:34 PM	#20
Ramos Colonel 887 Rep 2,909 Posts Drives: G20 2020 M340 Join Date: Nov 2007 Location: So-Cal iTrader: (7)	Thanks.. Funny Bobby never mentioned those... Guess I won't need them until next winter anyway... By the way, I went through a no touch automatic car wash and the filters were completely dry after
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search