E90Post
 


TNT Racewerks
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > V3 Rev. 1 91 oct Stage 1 & 2 Dyno



Reply
 
Thread Tools Search this Thread
      04-01-2009, 12:45 AM   #1
HB335
Private
United_States
7
Rep
72
Posts

Drives: 335 Coupe
Join Date: Oct 2007
Location: So Cal, CA

iTrader: (0)

V3 Rev. 1 91 oct Stage 1 & 2 Dyno

91 octane gas

My Mods:
Procede V3 Rev. 1, TQ 90% MT Doomsday map
Vishnu DCI
Riss Racing Catless Downpipes
AE HFC Exhaust
Forge DVs

Red is stage 1
Blue is stage 2



On a side note the AE crew installed my helix FMIC intercooler. Thanks guys! I bumped the procede setting to stage 3 and raised the TQ to 92% and all I can say is that my car pulls like crazy over 5000rpm. My gf was kinda sleepy and then I raced a sti and she woke up pretty quick.

I will be dynoing my car with the FMIC sometime in the future. I have the baseline dynos somewhere, I'll post those too. I think my max power completely stock was around 276hp.

Last edited by HB335; 04-01-2009 at 01:05 AM.. Reason: Wasn't able to post picture
Appreciate 0
      04-01-2009, 12:47 AM   #2
lpphreakx06
Professional Moose Racer
lpphreakx06's Avatar
Vietnam
325
Rep
7,509
Posts

Drives: SG 335i E92 RIP + 2015 SS M3
Join Date: Jul 2008
Location: Bellevue, Wa

iTrader: (25)

Pics don't load for me
__________________
Visit my blog anytime: http://www.sfpayments.com

BMW Dream Team PNW Chapter, member #1
|HP Autowerks | AR DESIGN | BMW PERFORMANCE | STOP TECH | Volk Racing| AMS | ARKYM
Appreciate 0
      04-01-2009, 12:48 AM   #3
Sniz
Lieutenant General
Sniz's Avatar
680
Rep
10,584
Posts

Drives: e92 335 - gone // e36 M3 turbo
Join Date: Mar 2007
Location: Ellicott City, MD

iTrader: (1)

no workie
__________________
Appreciate 0
      04-01-2009, 12:49 AM   #4
Mote
Colonel
Mote's Avatar
Colombia
143
Rep
2,162
Posts

Drives: 2008 E92 - 1991 E30
Join Date: Jan 2008
Location: Beverly Hills, CA

iTrader: (0)

Pics don't work.. can you just post your numbers?
Appreciate 0
      04-01-2009, 12:58 AM   #5
HB335
Private
United_States
7
Rep
72
Posts

Drives: 335 Coupe
Join Date: Oct 2007
Location: So Cal, CA

iTrader: (0)

I tried using the insert image function but it no workie. If anyone knows how to post pictures properly let me know.

Stage 1 Max Torque 359.39 Max Power 343.89
Stage 2 Max Torque 356.72 Max Power 353.28
Appreciate 0
      04-01-2009, 01:03 AM   #6
JB335
Banned
United_States
34
Rep
1,034
Posts

Drives: 335is
Join Date: Aug 2008
Location: so cal

iTrader: (1)

Garage List
2011 BMW 335IS  [7.60]
IF you want to email them to me I can post them for you. Send me a PM for my email address
Appreciate 0
      04-01-2009, 01:05 AM   #7
HB335
Private
United_States
7
Rep
72
Posts

Drives: 335 Coupe
Join Date: Oct 2007
Location: So Cal, CA

iTrader: (0)

There we go
Appreciate 0
      04-01-2009, 01:08 AM   #8
OpenFlash
United_States
1806
Rep
17,960
Posts

Drives: A Lot
Join Date: Sep 2006
Location: SF Bay, CA

iTrader: (0)

Garage List
Nice. And STD numbers (what is usually posted on this forum) would have been ~5whp higher. Just curious, does your AE exhaust still have a pair of high flow cats in it? Or are you completely catless? On 91oct, little things like that make a difference (along with thinks like dyno fans, cooldown time, adaption time, etc,.) Out of state (93oct) guys can get away with murder on the dyno.

shiv
Appreciate 0
      04-01-2009, 01:11 AM   #9
runningman
Banned
4
Rep
150
Posts

Drives: 335i SP
Join Date: Feb 2009
Location: nj

iTrader: (0)

Looks pretty bumpy... Sure that isn't a JB3 installed instead of V3?
Appreciate 0
      04-01-2009, 01:21 AM   #10
ontopofm
Lieutenant Colonel
79
Rep
1,548
Posts

Drives: stock
Join Date: Jun 2007
Location: CA

iTrader: (4)

are the numbers kinda low?
Appreciate 0
      04-01-2009, 01:27 AM   #11
OpenFlash
United_States
1806
Rep
17,960
Posts

Drives: A Lot
Join Date: Sep 2006
Location: SF Bay, CA

iTrader: (0)

Garage List
Quote:
Originally Posted by ontopofm View Post
are the numbers kinda low?
He's making around 360whp STD on 91oct. If that is with one set of cats still in the system, that's pretty darn good as far as peak numbers go. If that is fully catless, then I would say it's about 10-15whp low. But that could be explained by inadequate IC cooling fans. Just guessing on that since you can see the DME pull back timing at 5200rpm. That's why max power is at 6500rpm when it should be at 6000rpm.

Shiv
Appreciate 0
      04-01-2009, 12:09 PM   #12
HB335
Private
United_States
7
Rep
72
Posts

Drives: 335 Coupe
Join Date: Oct 2007
Location: So Cal, CA

iTrader: (0)

My AE Exhaust does have cats in it.
Appreciate 0
      04-01-2009, 01:25 PM   #13
cstmx_ryder
Colonel
cstmx_ryder's Avatar
United_States
171
Rep
2,875
Posts

Drives: A metal box with a roundel
Join Date: Jul 2007
Location: Portland, OR

iTrader: (2)

You should definitely do some more pulls on each stage to give it adaptation time......As I changed stages and continued doing more and more pulls, I usually see more gain on the second or third pulls after the car adapts.

Numbers looks good, except it looks a bit bumpy? Especially on the torque side........Any reason for that? And did you feel the bumpiness while in the car dynoing?
__________________

'08 AW E90 335i
PROcede V5 | BMS DCI | RR DPs | ETS FMIC | FORGE DVs | Stett CP | Vanguard | PSS10
Appreciate 0
      04-02-2009, 01:33 AM   #14
HB335
Private
United_States
7
Rep
72
Posts

Drives: 335 Coupe
Join Date: Oct 2007
Location: So Cal, CA

iTrader: (0)

Honestly I didn't give it much adapation time. I by accidently did one run on my low boost map, the 2nd run was stage 1 , and the 3rd run was stage 2. I'm not really looking to max my dyno numbers. I just wanted to get a reference number to see if my mods are making more power and to share my results with the community. I'm looking forward to dynoing with the fmic installed. I felt a huge difference in the upper rpms at full throttle with fmic installed.
Appreciate 0
      04-02-2009, 01:48 AM   #15
HB335
Private
United_States
7
Rep
72
Posts

Drives: 335 Coupe
Join Date: Oct 2007
Location: So Cal, CA

iTrader: (0)

Quote:
Originally Posted by shiv@vishnu View Post
He's making around 360whp STD on 91oct. If that is with one set of cats still in the system, that's pretty darn good as far as peak numbers go. If that is fully catless, then I would say it's about 10-15whp low. But that could be explained by inadequate IC cooling fans. Just guessing on that since you can see the DME pull back timing at 5200rpm. That's why max power is at 6500rpm when it should be at 6000rpm.

Shiv
With STD numbers Its 362.76 hp and torque is at 366.30. Thanks for the great product Shiv. Really enjoying the Procede especially with the FMIC installed and looking forward to the canbus upgrade
Appreciate 0
      04-02-2009, 06:44 AM   #16
OpenFlash
United_States
1806
Rep
17,960
Posts

Drives: A Lot
Join Date: Sep 2006
Location: SF Bay, CA

iTrader: (0)

Garage List
Quote:
Originally Posted by HB335 View Post
With STD numbers Its 362.76 hp and torque is at 366.30. Thanks for the great product Shiv. Really enjoying the Procede especially with the FMIC installed and looking forward to the canbus upgrade
362whp with the stock FMIC, a pair of cats still in the system on a Stg 2 map running on 91oct isn't bad at all! With the FMIC installed and now on the Stg 3 map, you should see ~375whp. And ~385whp if you decide to go completely catless. Glad you are enjoying the tune

Shiv

Last edited by OpenFlash; 04-02-2009 at 07:05 AM..
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:00 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST