Problem installing KW v2 on E92 (the rear)

metrickid · 04-25-2009, 04:47 PM

bla vbla bls

mike-y · 04-25-2009, 05:31 PM

wait, you removed the guide support and grommet that is stuck in the top mounting hole? Does KW provide a replacement for that part?

Take some pics of your car's suspension with the wheels off, so we can get a better idea of what you are talking about

PNF · 04-25-2009, 11:55 PM

I'd DIY a lot of stuff....... but I wouldnt DIY on my suspension or something that could impact the "safety" while driving unless I really know what I'm doing...

good luck

mike-y · 04-26-2009, 05:15 PM

ok, I see what you are talking about. So the KW shaft is thicker than the oem shaft? Drilling out that dished washer shouldn't be a problem. FWIW, you have to do that on koni applications if you have a honda/acura, as the koni shaft is larger than the oem. As long as the parts move freely like before, and you don't have excess slop, you should be fine.

PNF · 04-27-2009, 11:25 AM

Quote:

Originally Posted by Rossifumi

My friend works as a mechanic at a Volvo dealership and builds cars on his spare time so that is not a problem. The problem is that the parts didn't fit

lucky you to have a nice friend/mechanic helping you out!

04-25-2009, 04:47 PM	#1
metrickid Dinosaur supervisor 3037 Rep 4,215 Posts Drives: F20 120d Join Date: Feb 2007 Location: Autobahn iTrader: (0)	- bla vbla bls Last edited by metrickid; 09-14-2009 at 01:26 PM..
	Appreciate 0 Tweet Quote

04-25-2009, 05:31 PM	#2
mike-y just another bmw douche bag 195 Rep 3,640 Posts Drives: 1.9L of fury Join Date: Nov 2008 Location: Los Angeles, CA iTrader: (4)	wait, you removed the guide support and grommet that is stuck in the top mounting hole? Does KW provide a replacement for that part? Take some pics of your car's suspension with the wheels off, so we can get a better idea of what you are talking about
	Appreciate 0 Quote

04-25-2009, 11:55 PM	#3
PNF Colonel 175 Rep 2,355 Posts Drives: 15' YMB F80 M3 Join Date: Oct 2008 Location: Wayne, PA / Taipei iTrader: (4)	I'd DIY a lot of stuff....... but I wouldnt DIY on my suspension or something that could impact the "safety" while driving unless I really know what I'm doing... good luck __________________ 2015 F80 Fully loaded (minus the CCB) YMB M3 / Individual Amaro Brown BBS \| KW \| Vorsteiner \| IND \| Akrapovic \| BMW CF Performance Interior \| Brembo \| Eibach 2008 E92 335i (sold)
	Appreciate 0 Quote

04-26-2009, 05:15 PM	#4
mike-y just another bmw douche bag 195 Rep 3,640 Posts Drives: 1.9L of fury Join Date: Nov 2008 Location: Los Angeles, CA iTrader: (4)	ok, I see what you are talking about. So the KW shaft is thicker than the oem shaft? Drilling out that dished washer shouldn't be a problem. FWIW, you have to do that on koni applications if you have a honda/acura, as the koni shaft is larger than the oem. As long as the parts move freely like before, and you don't have excess slop, you should be fine.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search