[A990]

Hi All,

I've bought an LED for the angel eyes which uses 0.15W the car expects 10W bulb which causes an error on the dash. in order to cancel the error what would be the resistor size i need to add to avoid the error i'm guessing 10W and 15 ohms ?

Thanks in advance !

[diablo2112]

V= IR

P = VI

10W = 12V * I; I= 0.83 amp.

12 V/0.83 amp = 14.46 ohm

You need a 10W, 15 ohm resistor - you are exactly correct.

[A990]

Many Thanks !

I'll Keep you posted !

Originally Posted by diablo2112

V= IR

P = VI

10W = 12V * I; I= 0.83 amp.

12 V/0.83 amp = 14.46 ohm

You need a 10W, 15 ohm resistor - you are exactly correct.

[A990]

Hi Guys,

Did the test twice and i still get the errors i'm using 25 W and 15 ohm and it still throws an error... Any ideas on how to fix ?

Thanks,
/A

Originally Posted by diablo2112

V= IR

P = VI

10W = 12V * I; I= 0.83 amp.

12 V/0.83 amp = 14.46 ohm

You need a 10W, 15 ohm resistor - you are exactly correct.

[kmarei]

i know with my turn signal, the OEM bulb is 6 ohm
the only resistor that worked and prevented the bulb failure was a 3ohm resistor