Wheel Brushes.. What are you guys using to clean out the inner barrel of the rims??

Craig@SupremePower · 05-22-2009, 04:43 PM

Suggestions?? Something to get inside of these to get out dirt and brake dust?? TIA

oneshare325 · 05-22-2009, 04:50 PM

E-Z Detail Brush

LOW2000 · 05-22-2009, 05:26 PM

Just to keep the majority of the dirt off, I use a combo of soapy water and a wash mit, an EZ detail brush, and P21S Gel.

To really get at them, especially for my billet wheels that are polished inside and out, I need to take them off to polish the inside of the wheel. For that I use either Mothers in a can, Mothers Power Metal, and Coopers Polish and Maintain.

jopa489 · 05-22-2009, 07:39 PM

EZ Detail Brush (and maybe a smaller brush to get in the lug holes) with some some soap/water (or P21s) to remove the crud, a couple of coats of Poorboy's Wheel Sealant to help keep the buildup to a minimum, and some Mother's Chrome polish for the lip.

To really get them clean, you'll want to remove them from the car completely.

emr0591 · 05-22-2009, 08:12 PM

EZ Detail Brush
Swissvax Wheel Cleaner Brush
Sonax Wheel Cleaner R 2000

Craig@SupremePower · 05-22-2009, 10:16 PM

thanx guys..

pander5 · 05-23-2009, 10:18 AM

The EZ Detail brush is excellent but my handle broke. I'm now going to order the Daytona Speed Master that is the same design but has a more substantial center rod. I still use the EZ Detail for smaller wheels and engine cleaning. I would by a couple more EZD brushes if they were the only offering in the market - they are that good even for intricate wheel patterns. Just not durable enough for very frequent use on multiple types of wheels and dirt conditions.

Also, watch the rubber tip on the end of the rod. Mine came off a couple of times until I Gorilla glued the b***h on permanently. Haven't had it missing yet.

Again, don't get me wrong, I love the EZDetail brush. I just need "industrial strength".

chrisE92 · 05-23-2009, 12:40 PM

Quote:

Originally Posted by jopa489

EZ Detail Brush (and maybe a smaller brush to get in the lug holes) with some some soap/water (or P21s) to remove the crud, a couple of coats of Poorboy's Wheel Sealant to help keep the buildup to a minimum, and some Mother's Chrome polish for the lip.

To really get them clean, you'll want to remove them from the car completely.

+1! same for me, although I'm using the chemical guys sticky gel citrus wheel cleaner instead of the p21s

Craig@SupremePower · 05-23-2009, 03:05 PM

Link??

Quote:

Originally Posted by pander5

The EZ Detail brush is excellent but my handle broke. I'm now going to order the Daytona Speed Master that is the same design but has a more substantial center rod. I still use the EZ Detail for smaller wheels and engine cleaning. I would by a couple more EZD brushes if they were the only offering in the market - they are that good even for intricate wheel patterns. Just not durable enough for very frequent use on multiple types of wheels and dirt conditions.

Also, watch the rubber tip on the end of the rod. Mine came off a couple of times until I Gorilla glued the b***h on permanently. Haven't had it missing yet.

Again, don't get me wrong, I love the EZDetail brush. I just need "industrial strength".

jopa489 · 05-23-2009, 04:57 PM

Quote:

Originally Posted by Craig@SupremePower

Link??

Daytona Speed Master: http://www.autogeek.net/auto-wheel-brush.html
EZ-Detail Brush Small: http://www.detailedimage.com/DI-Acce.../Mini-Size-S2/
EZ-Detail Brush Large: http://www.detailedimage.com/DI-Acce.../Full-Size-S1/

And finally, some discussion on the Daytona Speed Master: http://www.autogeekonline.net/forum/...eel-brush.html

Craig@SupremePower · 05-23-2009, 06:10 PM

thank you sir...

Quote:

Originally Posted by jopa489

Daytona Speed Master: http://www.autogeek.net/auto-wheel-brush.html
EZ-Detail Brush Small: http://www.detailedimage.com/DI-Acce.../Mini-Size-S2/
EZ-Detail Brush Large: http://www.detailedimage.com/DI-Acce.../Full-Size-S1/

And finally, some discussion on the Daytona Speed Master: http://www.autogeekonline.net/forum/...eel-brush.html

BMW1986 · 05-24-2009, 10:54 PM

I use the Ace Power Stick. It attaches to a drill and works just like the brushes in the car washes. There is no metal tip, so it won't scratch the rims. This combined with P21s is the BEST combo by far!

SpecC · 05-25-2009, 03:52 AM

ace powersticks are by far the most powerful and useful thing, but it is too expensive for me to buy.

i'd suggest the follow for the inside

Detailersdomain spoke brush first
EZ detail brush MINI for a follow up

i only have the EZ detail brush right now, and I don't feel it's strong enough to really get all the grit out

BMW1986 · 05-25-2009, 04:43 PM

Quote:

Originally Posted by SpecC

ace powersticks are by far the most powerful and useful thing, but it is too expensive for me to buy.

i'd suggest the follow for the inside

Detailersdomain spoke brush first
EZ detail brush MINI for a follow up

i only have the EZ detail brush right now, and I don't feel it's strong enough to really get all the grit out

+1 on the $$ part but it's worth if you want to make an excellent purchase.

Pyrat 2 · 05-25-2009, 05:19 PM

I firmly believe that I should not put anything on my wheels that I would not put on the finish of my car. Therefore I use any and all of the following with lots of soap and water (no wheel cleaners at all):
1. My fingers.
2. Microfiber towel.
3. Microfiber wheel 'brush' from autozone.

NoMods · 05-25-2009, 06:53 PM

The Daytona is still on sale @ autogeek! i got mine last week, it's nice.

05-25-2009, 08:22 PM

ace powersticks are best, nothing comes close, just get the all around attatchment.

jopa489 · 05-25-2009, 10:56 PM

Quote:

Originally Posted by armoredsaint

The Daytona is still on sale @ autogeek! i got mine last week, it's nice.

I'm tempted, it does look pretty nice. Want to get a few of those finger pocket things too, they could be useful.

Just checked Autogeek and on second thought, at $13 plus shipping for three of the finger pockets, forget it. I can do without.

normtrum · 05-25-2009, 11:23 PM

I do this. I've got it down to 3-4 minutes per wheel.

http://www.e90post.com/forums/showthread.php?t=156369

Craig@SupremePower · 05-25-2009, 11:31 PM

nice technique...

Quote:

Originally Posted by normtrum

I do this. I've got it down to 3-4 minutes per wheel.

http://www.e90post.com/forums/showthread.php?t=156369

normtrum · 05-25-2009, 11:35 PM

Quote:

Originally Posted by Craig@SupremePower

nice technique...

Thanks Craig.....but I should have warned you it was a long read.

BMW1986 · 05-27-2009, 11:58 AM

Quote:

Originally Posted by index1489

ace powersticks are best, nothing comes close, just get the all around attatchment.

What's the all around attachment??

05-22-2009, 04:43 PM	#1
Craig@SupremePower G.O.A.T.! 1027 Rep 74,992 Posts Drives: '18 GMC Yukon XL Join Date: Mar 2008 Location: New Jersey iTrader: (14)	Wheel Brushes.. What are you guys using to clean out the inner barrel of the rims?? Suggestions?? Something to get inside of these to get out dirt and brake dust?? TIA
	Appreciate 0 Tweet Quote

05-22-2009, 04:50 PM	#2
oneshare325 Brigadier General 204 Rep 4,178 Posts Drives: E90 325i, E82 135i Join Date: Feb 2006 Location: Arlington, VA iTrader: (11) Garage List 2018 BMW M3 [0.00] 2006 325i [0.00]	E-Z Detail Brush
	Appreciate 0 Quote

05-22-2009, 05:26 PM	#3
LOW2000 Private First Class 3 Rep 120 Posts Drives: 00 Silverado 08 G35S 62 CJ5 Join Date: May 2008 Location: SoCal iTrader: (0)	Just to keep the majority of the dirt off, I use a combo of soapy water and a wash mit, an EZ detail brush, and P21S Gel. To really get at them, especially for my billet wheels that are polished inside and out, I need to take them off to polish the inside of the wheel. For that I use either Mothers in a can, Mothers Power Metal, and Coopers Polish and Maintain.
	Appreciate 0 Quote

05-22-2009, 07:39 PM	#4
jopa489 Major General 127 Rep 6,594 Posts Drives: Anything with Wheels Join Date: Mar 2009 Location: USA iTrader: (9)	EZ Detail Brush (and maybe a smaller brush to get in the lug holes) with some some soap/water (or P21s) to remove the crud, a couple of coats of Poorboy's Wheel Sealant to help keep the buildup to a minimum, and some Mother's Chrome polish for the lip. To really get them clean, you'll want to remove them from the car completely. __________________ X7 LCI // Incoming C7 ZR1 ZTK // Sebring + TRX // Hydro + Raptor Gen1 Roush // Tuxedo
	Appreciate 0 Quote

05-22-2009, 08:12 PM	#5
emr0591 Enlisted Member 1 Rep 34 Posts Drives: E90 330i 2006 TiAg Join Date: Apr 2005 Location: USA iTrader: (0)	EZ Detail Brush Swissvax Wheel Cleaner Brush Sonax Wheel Cleaner R 2000
	Appreciate 0 Quote

05-22-2009, 10:16 PM	#6
Craig@SupremePower G.O.A.T.! 1027 Rep 74,992 Posts Drives: '18 GMC Yukon XL Join Date: Mar 2008 Location: New Jersey iTrader: (14)	thanx guys..
	Appreciate 0 Quote

05-23-2009, 10:18 AM	#7
pander5 Special Forces - Discretion is superior 32 Rep 1,011 Posts Drives: 335i Coupe Sapphire Black Join Date: Mar 2006 Location: Tampa, FL iTrader: (0) Garage List 2007 335i Coupe [0.00]	The EZ Detail brush is excellent but my handle broke. I'm now going to order the Daytona Speed Master that is the same design but has a more substantial center rod. I still use the EZ Detail for smaller wheels and engine cleaning. I would by a couple more EZD brushes if they were the only offering in the market - they are that good even for intricate wheel patterns. Just not durable enough for very frequent use on multiple types of wheels and dirt conditions. Also, watch the rubber tip on the end of the rod. Mine came off a couple of times until I Gorilla glued the b***h on permanently. Haven't had it missing yet. Again, don't get me wrong, I love the EZDetail brush. I just need "industrial strength". __________________ M3 + trailer hitch = oxymoron
	Appreciate 0 Quote

05-24-2009, 10:54 PM	#12
BMW1986 Major 95 Rep 1,465 Posts Drives: 11 M3 E92 ZCP JB/PS & BLK Join Date: Mar 2008 Location: Brooklyn, NY iTrader: (7)	I use the Ace Power Stick. It attaches to a drill and works just like the brushes in the car washes. There is no metal tip, so it won't scratch the rims. This combined with P21s is the BEST combo by far! __________________ 11 E92 M3 DCT Jerez Black ZCP...Eisenmann, Dinan, Fabspeed, IND, LUX
	Appreciate 0 Quote

05-25-2009, 03:52 AM	#13
SpecC Completely obsessed with detailing 308 Rep 15,441 Posts Drives: E90 SG 330i, white Scion tC Join Date: Nov 2006 Location: San Francisco and Davis iTrader: (4)	ace powersticks are by far the most powerful and useful thing, but it is too expensive for me to buy. i'd suggest the follow for the inside Detailersdomain spoke brush first EZ detail brush MINI for a follow up i only have the EZ detail brush right now, and I don't feel it's strong enough to really get all the grit out
	Appreciate 0 Quote

05-25-2009, 05:19 PM	#15
Pyrat 2 Colonel 1437 Rep 2,562 Posts Drives: Rapidly from A to B Join Date: Jun 2005 Location: Chicago 'burbs or TN Smokies iTrader: (3) Garage List 2022 Porsche GT4 [9.64] 2018 Porsche GT3 [9.33] 2007 Z4 M Roadster [8.33] 2020 BMW X1 [10.00]	I firmly believe that I should not put anything on my wheels that I would not put on the finish of my car. Therefore I use any and all of the following with lots of soap and water (no wheel cleaners at all): 1. My fingers. 2. Microfiber towel. 3. Microfiber wheel 'brush' from autozone. __________________ '07 Z4MR '22 GT4 '18 GT3 '16 GT4, '16 M2, '14 X1, '13 135is, '06 330i, '03 323 Ci, '01 330i, '99 M3 (RIP), '96 318is, some non-BMWs
	Appreciate 0 Quote

05-25-2009, 06:53 PM	#16
NoMods Colonel 1227 Rep 2,383 Posts Drives: 2022 M5 Join Date: May 2006 Location: USA iTrader: (10) Garage List 2022 M5 [10.00]	The Daytona is still on sale @ autogeek! i got mine last week, it's nice.
	Appreciate 0 Quote

05-25-2009, 08:22 PM	#17
RemovedUser Guest 0 Rep n/a Posts Drives:	ace powersticks are best, nothing comes close, just get the all around attatchment.
	Appreciate 0 Quote

05-25-2009, 11:23 PM	#19
normtrum Colonel 52 Rep 2,225 Posts Drives: e90 335i, e46 330i Join Date: Feb 2007 Location: PNW iTrader: (1)	I do this. I've got it down to 3-4 minutes per wheel. http://www.e90post.com/forums/showthread.php?t=156369 __________________ 07 335i sedan \| Steptronic \| Black saphire \| Terra \| ZPP \| ZSP \| Cold Weather \| CA \| PDC \| Nav \| OEM Alarm
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search