[Turbo>NA]

So guys, I recently took off my aero lip and I used 3m tape to hold it. So after having it on for about 5 months. I took of the lip for some cleaning and I noticed some of the glur from the 3m tape is still stuck ont he bumper.


My car is white so it is noticable, and I wanted to know whhat I can do to take it off?

I have tried cleaning it for an hour and it doesnt come off!

Some tips or advice plz!

[zshortyz]

did you try hot water? thats what i did on the front of my car there was a rubber piece that the dealer put on to cover the front license plate holes i took it off and changed it out but to take off the excess i used hot water and just rubbed it off.

[Jonny550]

well i used goo gone for the glue that was left on from debadging ......just get goo gone ,spray detailer and 2 microfiber towels

squirt some gg on a microfibe rub for 5-7 seconds squirt some more and repeat till gunk is removed after spray with some spray detailer to remove any residue.




btw...goo gone will not affect clear coat or paint totaly safe

[Turbo>NA]

Originally Posted by Jon335iFL

well i used goo gone for the glue that was left on from debadging ......just get goo gone ,spray detailer and 2 microfiber towels

squirt some gg on a microfibe rub for 5-7 seconds squirt some more and repeat till gunk is removed after spray with some spray detailer to remove any residue.




btw...goo gone will not affect clear coat or paint totaly safe

where do i buy?

[MCMLXXXIX]

you can find goo gone in a lot of places. home depot is one, comes in diff sizes

[Jonny550]

Originally Posted by MCMLXXXIX

you can find goo gone in a lot of places. home depot is one, comes in diff sizes

+1

[zaxjax]

Goo gone works well. Any auto parts store should have PrepSol or 3M Adhesive Remover.