[olivers]

hello everyone,

I am looking to change my standard 19" alloys on my 335d coupe and was wondering if the following alloys would fit my car. Also would i need spacers or not for them to fit.

Fronts alloys 9J X20 ET42
Rear alloys 10J X 20 ET33

Thanks for any help.

[M3-FAST]

If you use the forum wheel/tyre calculator it will assist you in working out the dimensions of your new wheels.....

http://www.e90post.com/forums/forumdisplay.php?f=12

Pop in the sizes of your OEM fitted wheels, and then enter the sizes and offsets of the intended wheels - it will tell you how much further they will protrude or retract from stock. Remember that if they are retracting, adding a spacer will help but if you are going to 10" rears you will have to be very precise with the offsets as adding a spacer onto a badly offsetted wheel will just make it rub the arches.

I would browse the wheel/tyre forum and maybe post on there as well, you may get a lot more answers from members who have similar sized wheels already fitted?

[olivers]

Thanks for your help.