[kjrulz]

Originally Posted by 666 Performance

Ive done a few pairs of electric cutouts on Audi S4s in the past. Most of them use Quicktime Performance cutouts, which seem to work well. Most of them ran aftermarket downpipes to a fairly quiet exhaust. Here is a link to them.

https://shop.quicktimeperformance.co...ct_detail&p=29

Fabrication wise they are anywhere from 4-6 hours to install a dual setup depending on how tight everything is and how quickly the existing exhaust components can come apart. My labor rate is $100/hr with the possibility of $50-60 or so for a stainless mandrel bend if its not a matter of cutting a straight piece out of the existing exhaust.

Here is a shot of a pair on an s4 I did awhile back.

http://666fabrication.com/s4_1.jpg

If you have any other questions let me know. Thanks!


Jon Volk
666 Fabrication
Quality that lasts an eternity

email recieved

[Former_Boosted_IS]

Originally Posted by kjrulz

Ive done a few pairs of electric cutouts on Audi S4s in the past. Most of them use Quicktime Performance cutouts, which seem to work well. Most of them ran aftermarket downpipes to a fairly quiet exhaust. Here is a link to them.

https://shop.quicktimeperformance.co...ct_detail&p=29

Fabrication wise they are anywhere from 4-6 hours to install a dual setup depending on how tight everything is and how quickly the existing exhaust components can come apart. My labor rate is $100/hr with the possibility of $50-60 or so for a stainless mandrel bend if its not a matter of cutting a straight piece out of the existing exhaust.

Here is a shot of a pair on an s4 I did awhile back.

http://666fabrication.com/s4_1.jpg

If you have any other questions let me know. Thanks!


Jon Volk
666 Fabrication
Quality that lasts an eternity

How is this not advertising on the forums?

[kjrulz]

LOL i'm not part of 666, i'm just showing the pricing and info they gave me since the topic has been coming up...

[dzenno]

this is VERY cool

[Jeff@TopGearSolutions]

Originally Posted by kjrulz

LOL i'm not part of 666, i'm just showing the pricing and info they gave me since the topic has been coming up...

You should probably quote the entire message so it doesnt appear that way. Thanks for the info though.

I think our stock piping is 2.36 though. For reference, and most aftermarket exhaust are 2.5 for cat back.