n55 Tuning Update

OpenFlash · 07-01-2010, 08:38 PM

Hi guys,
Quick update. We've been busy porting Procede v4 over to the n55. So far, we've made some good progress. As of today, we have the following working:

-Code reading/clearing (first ever for the n55?)
-DTC mapswitching

I'll post videos showing these bits in action tomorrow

Once we have CAN logging working, the rest of the job is reasonably easy. I'll keep you guys updated. But so far, our biggest concern was code reading/clearing. Without that ability, any tune is pretty useless.

Cheers,
shiv

AltecBX · 07-01-2010, 08:41 PM

Very cool. How does the power delivery feel?

OpenFlash · 07-01-2010, 08:47 PM

Quote:

Originally Posted by AltecBX

Very cool. How does the power delivery feel?

Stock for stock, the n55 feels better than the n54. Some of that might be due to the short gearing and 7speed DCT. But still, i think the engine runs better. Tuned for tuned, I don't know yet. It will be a pretty big challenge for the n55 to respond to tuning as well as the n54 has. We'll see...

Shiv

supracg · 07-01-2010, 09:05 PM

if your implementing the same hardware making the tune should be cake after some tweaking, if so n55 guys are lucky tuning developed so quickly for them

jpsimon · 07-01-2010, 11:51 PM

Quote:

Originally Posted by supracg

if your implementing the same hardware making the tune should be cake after some tweaking, if so n55 guys are lucky tuning developed so quickly for them

+1

bmrm396 · 07-02-2010, 01:36 AM

Quote:

Originally Posted by shiv@vishnu

Stock for stock, the n55 feels better than the n54. Some of that might be due to the short gearing and 7speed DCT. But still, i think the engine runs better. Tuned for tuned, I don't know yet. It will be a pretty big challenge for the n55 to respond to tuning as well as the n54 has. We'll see...

Shiv

for those of us who arent just power hungry, this could be a great engine for us - smooth power delivery and hopefully minimal lag, id accept any increase in power (obviously more the better) but i think it will be a great time to showcase just how centered and balanced this new engine is. what im sayin is it doesnt have to be a 400whp monster, lets make it f1 smooth and responsive

EDIT: oh ya, and MAJOR PROPS to shiv haha

AltecBX · 07-02-2010, 03:04 AM

Terry fromBMS mentioned that the n54 felt stronger. Interesting to hear different perspective. Once everything is ported, will you run both these engine together. I would like to see them neck and neck at the track with the v4.
Have you implemented launch control as well?

joec500 · 07-02-2010, 03:28 AM

Quote:

Originally Posted by AltecBX

Terry fromBMS mentioned that the n54 felt stronger. Interesting to hear different perspective. Once everything is ported, will you run both these engine together. I would like to see them neck and neck at the track with the v4.
Have you implemented launch control as well?

I am also skeptical as Shiv probably hasn't driven a stock N54 in years

IlChengis · 07-02-2010, 01:45 PM

Shiv, will you be able to use the same exact PROcede hardware (perhaps with a different harness and of course different map) on the N55?

-Walter

FrankiE90 · 07-02-2010, 01:59 PM

in for video.

OpenFlash · 07-02-2010, 02:06 PM

Quote:

Originally Posted by Treppiede

Shiv, will you be able to use the same exact PROcede hardware (perhaps with a different harness and of course different map) on the N55?

-Walter

Yep. Same exact Procede computer but loaded with different firmware/maps. And different harness too of course

Shiv

PS. Videos to come later today.

stressdoc · 07-02-2010, 02:15 PM

Awesome. Lucky N55s!

Sniz · 07-02-2010, 04:26 PM

its later

want video and dyno's before your allowed to celebrate this weekend.

the mob demands it.

IlChengis · 07-02-2010, 04:28 PM

Quote:

Originally Posted by shiv@vishnu

Yep. Same exact Procede computer but loaded with different firmware/maps. And different harness too of course

Thanks for confirming, that is good.

-Walter

D.B.S · 07-02-2010, 06:02 PM

Outstanding news... I hear harness will be ready by the end of the month? (unless Robert was fibbing j/k)... I just ordered my new N55 X5, will be here by middle of august

Dealership showed me all service work done on my 335, the HPFP had been replaced once before I bought the car, and again when I had it done 4k miles ago... Pissed me off that the dealership didn't disclose that when they sold me the car a year ago... But I digress (Off Topic).

iBoost · 07-02-2010, 06:32 PM

Quote:

Originally Posted by shiv@vishnu

Yep. Same exact Procede computer but loaded with different firmware/maps. And different harness too of course

Shiv

PS. Videos to come later today.

Awesome for the peeps moving onto the n55! Nice Job Shiv!

RyanMv4 · 07-02-2010, 07:24 PM

in for video !

riKs · 07-02-2010, 09:45 PM

Quote:

Originally Posted by shiv@vishnu

Stock for stock, the n55 feels better than the n54. Some of that might be due to the short gearing and 7speed DCT. But still, i think the engine runs better. Tuned for tuned, I don't know yet. It will be a pretty big challenge for the n55 to respond to tuning as well as the n54 has. We'll see...

Shiv

Can't wait to see the final result!

shockin330i · 07-03-2010, 04:15 AM

subscribing..

nemith · 07-03-2010, 11:18 AM

Quote:

-Code reading/clearing (first ever for the n55?)

I am pretty sure BT can do this and has done it before you.

shockin330i · 07-03-2010, 11:32 AM

Quote:

Originally Posted by nemith

I am pretty sure BT can do this and has done it before you.

So much bickering on these forums...

OpenFlash · 07-03-2010, 03:34 PM

Quote:

Originally Posted by nemith

I am pretty sure BT can do this and has done it before you.

Are you sure about that? Last I checked, BT wasn't compatible with the new DME. I'm sure that will changed eventually of course.

Shiv

07-01-2010, 08:38 PM	#1
OpenFlash 1804 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	n55 Tuning Update Hi guys, Quick update. We've been busy porting Procede v4 over to the n55. So far, we've made some good progress. As of today, we have the following working: -Code reading/clearing (first ever for the n55?) -DTC mapswitching I'll post videos showing these bits in action tomorrow Once we have CAN logging working, the rest of the job is reasonably easy. I'll keep you guys updated. But so far, our biggest concern was code reading/clearing. Without that ability, any tune is pretty useless. Cheers, shiv
	Appreciate 0 Tweet Quote

07-01-2010, 08:41 PM	#2
AltecBX Colonel 336 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	Very cool. How does the power delivery feel? __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0 Quote

07-01-2010, 09:05 PM	#4
supracg Banned 7 Rep 320 Posts Drives: 135i Join Date: Mar 2009 Location: potomac iTrader: (0)	if your implementing the same hardware making the tune should be cake after some tweaking, if so n55 guys are lucky tuning developed so quickly for them
	Appreciate 0 Quote

07-02-2010, 03:04 AM	#7
AltecBX Colonel 336 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	Terry fromBMS mentioned that the n54 felt stronger. Interesting to hear different perspective. Once everything is ported, will you run both these engine together. I would like to see them neck and neck at the track with the v4. Have you implemented launch control as well?
	Appreciate 0 Quote

07-02-2010, 01:45 PM	#9
IlChengis once Treppiede 64 Rep 915 Posts Drives: 2012 E92 M3 Join Date: Aug 2008 Location: Miami and Atlanta iTrader: (4)	Shiv, will you be able to use the same exact PROcede hardware (perhaps with a different harness and of course different map) on the N55? -Walter __________________ 2013 E92 M3 \| 6MT \| AlpWhite \| SilverNovillo \| CarbonTrim \| ZCP \| PremiumPkg \| Alarm 2009 E92 335i \| 6MT \| AlpWhite \| CoralRed \| AlumTrim \| M-Sport \| Nav \| Logic7 \| Alarm (sold to a friend - still in the family)
	Appreciate 0 Quote

07-02-2010, 01:59 PM	#10
FrankiE90 Major General 669 Rep 8,800 Posts Drives: Krooked Sk8board Join Date: Feb 2008 Location: Pasadena, Ca iTrader: (11)	in for video. __________________ FrankiE90 AKA:.[The TANK] *CLICK THE SIG E90s (been gone but not forgotten) • KW clubsports • • • • • • • • • • 18" BBS GT4 // Build E30 (pending) + E46 M3 Wagon ESTORIL Blue
	Appreciate 0 Quote

07-02-2010, 02:15 PM	#12
stressdoc Moderator 657 Rep 10,863 Posts Drives: BMW i8; Toy 4runner TRD pro Join Date: Jun 2005 Location: Waco TX iTrader: (0)	Awesome. Lucky N55s! __________________ My recent ED photos: http://f80.bimmerpost.com/forums/sho....php?t=1026808 my not-so-recent ED: http://www.e90post.com/forums/showthread.php?t=31829 Please join BMWCCA http://bmwcca.org/index.php?pageid=c...&ref_by=300279
	Appreciate 0 Quote

07-02-2010, 04:26 PM	#13
Sniz Lieutenant General 679 Rep 10,584 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	its later want video and dyno's before your allowed to celebrate this weekend. the mob demands it. __________________
	Appreciate 0 Quote

07-02-2010, 06:02 PM	#15
D.B.S Lieutenant Colonel 30 Rep 1,748 Posts Drives: '11 X5 35i / '13 S5 Join Date: Jun 2009 Location: Deployed to Kuwait iTrader: (2)	Outstanding news... I hear harness will be ready by the end of the month? (unless Robert was fibbing j/k)... I just ordered my new N55 X5, will be here by middle of august Dealership showed me all service work done on my 335, the HPFP had been replaced once before I bought the car, and again when I had it done 4k miles ago... Pissed me off that the dealership didn't disclose that when they sold me the car a year ago... But I digress (Off Topic). __________________ BMW X5 35i: Boopie Exhaust & Intercooler, K&N Drop in Filter, JB3 (3+ psi) 2013 Dodge Challenger R/T: CAI, Catch Can, Custom Exhaust, Headers, 87MM Throttle Body, Diablo Custom 93 OCT Tune
	Appreciate 0 Quote

07-02-2010, 07:24 PM	#17
RyanMv4 First Lieutenant 37 Rep 374 Posts Drives: 2020 440xi Join Date: Jun 2010 Location: PA iTrader: (2)	in for video !
	Appreciate 0 Quote

07-03-2010, 04:15 AM	#19
shockin330i Brigadier General 807 Rep 4,784 Posts Drives: 2016 ZCP M3 Join Date: Jan 2007 Location: f y'all, I'm from Texas (RGV) iTrader: (1)	subscribing.. __________________ ERnie 2016 BSM/f80/ZCP
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search