Stud Conversion with Project Kics Lugs

Hyper psi-atic · 08-24-2010, 02:28 PM

Does anyone know the correct size stud to get for a Stud Conversion if using the Project Kics R40 40mm Open Ended Lugs? Basically I dont want the end of the stud poking out beyond the wheel too much and I will be running 5mm spacers up front and none in the rear as I will have et25 offsets back there. Also these will be on Advan RS-D's.

There are a few stud choices like the Macht Snell 75mm which look great in powdercoated black but are like $100 more than another option which are not and come in 50mm length.

Anyone have experience with others or have suggestions...vendors?

leemik · 08-24-2010, 03:13 PM

I have 90mm Turner studs.. they stick out rather far.. :-/

75mm should work pretty good.. not sure about 50mm..

as for the project kics lugs you need M12x1.50

kevin@bavarianx · 08-24-2010, 03:16 PM

I would suggest doing the same with the 75mm studs as I also have the Turner 90mm studs with Project Kics R40 Neochrome.

david @ eas · 08-24-2010, 03:31 PM

This also depends if you're planning on running a spacer on top of the studs too... If you're running anything under a 12mm spacer on the Macht Schnell studs, you'll be ok, but if it's anything bigger, than I would go with Turner's 90mm kit just so you have that extra clearance.

Hyper psi-atic · 08-24-2010, 03:47 PM

Wow thanks for the help guys! Jurrian hope you have the Macht Snell studs in stock....placing an order with you guys shortly.

08-24-2010, 02:28 PM	#1
Hyper psi-atic Lieutenant 34 Rep 428 Posts Drives: E92 335i M-Sport, 6MT, AW/CR Join Date: Apr 2009 Location: NoVA iTrader: (3)	Stud Conversion with Project Kics Lugs Does anyone know the correct size stud to get for a Stud Conversion if using the Project Kics R40 40mm Open Ended Lugs? Basically I dont want the end of the stud poking out beyond the wheel too much and I will be running 5mm spacers up front and none in the rear as I will have et25 offsets back there. Also these will be on Advan RS-D's. There are a few stud choices like the Macht Snell 75mm which look great in powdercoated black but are like $100 more than another option which are not and come in 50mm length. Anyone have experience with others or have suggestions...vendors? Attached Images Last edited by Hyper psi-atic; 08-24-2010 at 02:45 PM..
	Appreciate 0 Tweet Quote

08-24-2010, 03:13 PM	#2
leemik Lieutenant Colonel 515 Rep 1,572 Posts Drives: 2013 LRP M3 Coupe Join Date: Jan 2009 Location: Quincy, MA iTrader: (4) Garage List 2020 Acura NSX [0.00] 2013 BMW M3 [9.50]	I have 90mm Turner studs.. they stick out rather far.. :-/ 75mm should work pretty good.. not sure about 50mm.. as for the project kics lugs you need M12x1.50
	Appreciate 0 Quote

08-24-2010, 03:16 PM	#3
kevin@bavarianx Banned 33 Rep 812 Posts Drives: E36 M3 Join Date: Jul 2010 Location: Brea, CA iTrader: (3)	I would suggest doing the same with the 75mm studs as I also have the Turner 90mm studs with Project Kics R40 Neochrome.
	Appreciate 0 Quote

08-24-2010, 03:31 PM	#4
david @ eas 273 Rep 4,048 Posts Drives: BMW Join Date: Mar 2008 Location: Anaheim iTrader: (5)	This also depends if you're planning on running a spacer on top of the studs too... If you're running anything under a 12mm spacer on the Macht Schnell studs, you'll be ok, but if it's anything bigger, than I would go with Turner's 90mm kit just so you have that extra clearance.
	Appreciate 0 Quote

08-24-2010, 03:47 PM	#5
Hyper psi-atic Lieutenant 34 Rep 428 Posts Drives: E92 335i M-Sport, 6MT, AW/CR Join Date: Apr 2009 Location: NoVA iTrader: (3)	Wow thanks for the help guys! Jurrian hope you have the Macht Snell studs in stock....placing an order with you guys shortly.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search